All posts by Thomas Witherspoon

Field Reports, QRP, SOTA

SOTA: Activating Bearwallow Mountain with the KX2, MPAS Lite, and Hazel

6 Comments
The MPAS Lite vertical has an impressive view!

I’ve been receiving a lot of comments lately from readers and viewers asking to see more Hazel in my reports and videos.

Hazel, if you’re not familiar, is my brown, white, and freckled canine shadow.

Hazel requires absolutely no prep time to go on a hike and summit/park activation. She’ll go from a deep, dreamy sleep where she’s chasing squirrels and her paws are twitching, to wide awake, tail wagging and nose pointed at the door in 2 seconds flat.

All it takes is the sound of me putting on my hiking boots (which must be louder that I imagined).

On Monday (May, 24, 2021) the weather was beautiful and I decided to finally add Bearwallow Mountain to my list of SOTA activations. Hazel was ready for a short hike!

Bearwallow Mountain (W4C/CM-068)

Bearwallow is one of the most popular summits to activate in the Asheville/Hendersonville area of western North Carolina. Any semi-seasoned local SOTA activator probably has Bearwallow in the logs. Why?

The Bearwallow antenna farm is extensive!

For one thing, Bearwallow is a ham-friendly site. A number of local repeaters are on this mountain and some of our local clubs have access to the summit. Once–I can’t remember the year–I even spent time with a club (I believe it was the Roadshow ARC) on Bearwallow for the ARRL Field Day. It was a blast!

Bearwallow is also a very accessible summit.

The trailhead to the summit (Google Map) is tucked away in the Upper Hickory Nut Gorge area–and there’s ample paved parking unless you happen to pick a very busy day (basically, any weekend with good weather will be busy!). Hazel and I were hiking on a Monday morning, thus there was very little activity and loads of parking spaces.

Some years ago, Conserving Carolina acquired the summit and much of the land on Bearwallow Mountain. Their conservation easement protects this area from future development and opens it for the public to enjoy.

Conserving Carolina maintains the trail system to the summit and all of the hiker information and blazing.They do a brilliant job!

There are two options for hiking to the summit: a proper foot trail, or you can take the Fire Tower Road which is the best choice for hikers who need a more gentle incline and flat gravel hiking surface.

Click here for a map of the trails (PDF).

Hazel and I decided to go up the foot trail and descend via the Fire Tower Road to make a loop.

We spotted a number of plants in bloom on the way up.

The foot trail is an easy one to hike, too. It’s well-maintained, as I mentioned, and there are only a couple of steep-ish sections.

There are even opportunities to take in views on the trail.

When you reach the top of the trail, it opens onto a pasture.

And the views are panoramic!

There are cattle all over the summit, so give them wide berth.

Speaking of cattle, Hazel is quite fond of them…or at least what they leave behind.

She’s been known to roll in cow patties when she has the opportunity (or if I’m distracted with something else…like performing an activation!).

Hazel and I found a nice spot to set up the station well within the activation zone. On summits like Bearwallow where there are clusters of communications towers, I prefer not to set up next to them. This is where that 25 meter SOTA activation zone (AZ) comes in handy.

Gear:

I had actually planned to use my Elecraft KX3 on this activation, but after setting it up, I realized quickly that my power cord had developed a fault.

Fortunately, I packed a spare radio.

Knowing in advance that this would be a short hike–before leaving the QTH–I also packed the KX2 kit in my backpack as a backup. I don’t always have the luxury of packing a second radio, but wow! Am I glad I did that Monday!

Setting up the Chameleon CHA MPAS Lite vertical, of course, was super easy.

On the Air

I started the activation on 20 meters and spotted myself to the SOTA network via the SOTA Goat app. Of course, before leaving home, I had also set up an alert on SOTAwatch so that the spots page would auto-spot me via the Reverse Beacon Network (RBN) if I didn’t have mobile phone coverage.

In short? The contacts started rolling in. I was very surprised to have this sort of response on a Monday morning.

In 22 minutes, I worked a total of 19 stations including one summit to summit (S2S)–thanks for that, Eric (VA2EO)!

I was very pleased with the number of contacts logged in such short order because I only had a max of 25-30 minutes to be on the air before I needed to pack up and head back to the QTH.

Here’s the full log:

Activations like this one remind me of what one can do with QRP power and a modest antenna.

Sure, at one point–after I had worked at least my first four to achieve a valid QRP SOTA activation–I increased the power from 5 watts to a cloud-scorching 10 watts! 🙂

Here’s a QSO map of the contacts:

Video

Here’s my real-time, real-life (a.k.a. it’ll put you to sleep) video of the entire activation:

I must apologize for the audio in this one–it’s a little weak due to how the camera was set up.

Hazel at it again

So I brought along a retractable leash/lead for Hazel for this particular outing.

This leash allows her to roam more freely during our actual hike. On the summit, I locked the leash and attached it to my pack so it would keep her within 4 feet or so of where I was sitting which was cow patty-free.

At one point, near the end of the activation, when I was trying to manage a few calls, off-camera Hazel discovered that the leash unlocked, allowing her more flexibility to roam.

I looked up to discover that she found a semi-moist cow patty I somehow missed and was preparing to “enjoy” it. While sending CW and trying to keep from knocking down the camera, I used my left foot to put the brakes on her leash. She knew I was struggling, though, and tugged more.

I managed to stop her before even one paw plopped in the patty. Somehow. It was a very close call, though.

If you’ve watched my activation videos before, you’ve no doubt gathered that I’m not a multitasker. This little event really tested my ability to hold it all together on and off camera! 🙂

After packing up the station, Hazel and I took the Fire Tower Road back to the car. It was a very pleasant stroll and cow patty free.

Thank you for coming along with me on this SOTA activation and making it to the end of the report. You deserve an award! Please treat yourself to a local summit or park soon!

Thank you & 73,

Thomas (K4SWL)

Do you enjoy QRPer?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Announcements, Product Announcements, QRP

The new Xiegu X6100 portable HF transceiver: Yes, it’s real and no it’s not vaporware

49 Comments

It seems folks are now finding out about the new Xiegu X6100 HF & 6 meter portable transceiver.

There have been a few rumors about it, so I thought I’d share some of the few details that have been confirmed.

What is the X6100?

If the Xiegu X5105 and Xiegu GSOC had a baby, it would look like the X6100.

The X6100 is a completely self-contained SDR QRP transceiver much like the X5105. The X6100 sports a 4″ high-resolution color capacitive touch screen and is built on on a quad-core processor, 4G ROM, and 512MB RAM. I assume this will run on a similar Linux version/distro as the GSOC.

The X6100 will include an internal automatic antenna tuner (ATU) and a 3500 mAh internal rechargeable Lithium Ion battery pack.

Power output will be 5 watts when using the internal battery pack and 10 watts when connected to an external power source.

Key features:

  • Modes: USB/LSB (J3E), CW (A1A), FM (F3E), RTTY (F1B), AM (A3E)
  • Receiving: 0.5MHz~30MHz, 50MHz~54MHz
  • Transmitting: 1.8~2.0MHz, 3.5~3.9MHz
    5.3515~5.3665MHz 7.0~7.2MHz 10.1~10.15MHz 14.0~14.35MHz 18.068~18.168MHz 21.0~21.45MHz 24.89~24.99MHz 28.0~29.7MHz 50~54MHz
  • External voltage range : 9.0~15.0VDC
  • Integrated SWR meter
  • Voice and CW memory keying
  • Integrated modem
  • Native Bluetooth and WiFi functionality (easy keyboard and mouse connectivity)
  • Two USB interfaces supporting HOST and DEVICE
  • Standard high stability TCXO
  • 24bit sampling rate and “large dynamic RF front-end unit”
  • Ruggedized chassis and backlit buttons
  • Maximum current consumption in receive: 550mA

Early Product Sheet

I’ve also been sent a pre-production product brochure. This has a number of details and, as you’ll see, it even hasn’t been through a final edit.

Click here to download the preliminary Xiegu X6100 product brochure (PDF).

Pricing and availability

Pricing and availability have not been determined at time of posting. I will post an update when that information can be confirmed.

I can only assume bringing this new radio to fruition will take time. Most radio manufacturers are struggling to keep up inventory levels as we work our way out of the C-19 pandemic supply chain issues. Parts availability has become a real issue.

Announcements, Kits, New Products, News

WA3RNC’s TR-25 and upcoming TR-45L transceiver kits

7 Comments

Many thanks to a number of QRPer readers who note that WA3RNC has recently introduced the TR-25 CW Transceiver Kit and announced the upcoming TR-45L QRP Transceiver Kit.

Here’s the info about the TR-25 from the WA3RNC website:

Here is a compact but powerful 2-band CW transceiver kit that uses no tiny pushbuttons, and without those seemingly endless and hard-to-remember back menus. There is a knob or a switch for every function!

    • Size 5 ½ X 3 ¼ X 1 ½ less protrusions, weight 10.6 Oz
    • Full band coverage of 40 and 20 meters
    • About 10 watts output with a 14 volt power supply
    • 5 Watts minimum output with a 10 volt supply
    • 4 Watts output with an 9 volt supply
    • Optimized for operation from 3 series-connected 18650 Lithium cells
    • RIT tunes + and – 5KHz
    • Blue OLED display reads frequency to 10 Hz and RIT offset
    • Built in Iambic keyer is adjustable 5 to 35 WPM with front panel control
    • Separate jacks for straight key and paddles; Always ready for SKCC contacts
    • Operates on 9 to 14 volts, < 90ma receive, about 1 Amp Xmitt at 10 volts
    • Selectable tuning resolution steps of 10, 100, and 1000Hz
    • Low battery indicator with internal adjustment 9 to 12 volts
    • Front panel adjustable RF gain control
    • Front panel TX power control; Adjustable from 0 to 10 watts (@14V)
    • Rugged TO-220 FET RF amp can deliver 5 Watts key down for 5 minutes
    • Signal quality blue LED, RIT warning orange LED, Low battery red LED
    • More than enough audio to fill any room with an external speaker
    • Excellent receiver sensitivity with MDS of -132dBm (0.06 microvolt)
    • Very effective receive AGC prevents ear damage with strong signals
    • Transmitter harmonics and spurs -58dB, meets FCC specs
    • CW sidetone is the actual transmitter signal as heard by receiver
    • Match the received signal tone to the sidetone for perfect zero beating
    • Sharp IF filter; Better than 300 Hz at the -6dB point, plus 700 Hz audio filter
    • Over 200 machine placed SMT parts, and about 55 user installed parts
    • All critical circuits are factory pre-aligned and calibrated
    • No endless “back menus”; There is a control or switch for every function
    • Options include pre-wound toroid coils, precision optical tuning encoder, and complete factory assembly

Price is $250 or you can add pre-wound toroids for $18, a precision optical encoder for $30, or for $310 you can purchase this kit fully assembled and tested. Click here to check it out.

Here’s the info about the TR-45L from the WA3RNC website:

    • TR-45L is a 4-band 5-watt CW transceiver covering the 80-75, 40, 30, and 20 meter bands.
    • Full band coverage is provided, with the transmitter optimized for the CW band portions.
    • The receiver is provided with both narrow and wide band IF filters, and CW and SSB detectors.
    • An illuminated front panel meter shows “S” units on receive, and power output (forward or reverse) while transmitting. The meter also will display the battery state of charge.

    • A “High SWR” warning indicator will illuminate if the antenna SWR exceeds about 2:1.
    • The transmitter power output is adjustable from less than ½ watt to 5 watts with a front panel control.
    • RIT is provided to adjust the receive frequency up to + or – 5 KHz from the transmit frequency.
    • Two VFOs for each band are provided with recallable memories.
    • A built-in keyer is adjustable from about 5 wpm to 35 wpm with a front panel speed control.
    • Separate straight key and keyer paddle inputs are provided on the front panel.
    • A front panel adjustable sharp notch filter is provided to null out interference.
    • A front panel receiver RF gain control is provided.
    • Operates from a 12 volt nominal power source requiring up to 1.3 amperes on transmit, and about 130 ma on receive. A front panel power on – off switch is provided.
    • Tuning speed is easily settable from 1 Hz to 1 KHz per step.
    • A selectable dial lock is available to prevent inadvertent frequency changes.
    • There is a knob or switch for every function – no confusing back menus!
    • Size 8-1/2” wide, 5” high, 3” deep Weight about 2.8 lb with Internal Batteries

Beta testing is continuing…73 de WA3RNC

 No pricing or availability has been noted yet.

I life the look of both of these kits. I love the fact that you can buy pre-wound toroids as this is often one of the more complicated parts when building radios. Also, I’m pleased to see that all SMD components are pre-installed and that all critical circuits are factory pre-aligned and calibrated. That will make this kit accessible to a much larger kit building audience.

Click here to check out the WA3RNC kits!

News

The Indispensable Gazetteer

11 Comments

If you live here in the States and like to play radio in the field, I highly recommend one of the DeLorme Atlas & Gazetteer issues.

Although I use electronic devices like smart phones and dedicated GPS, it’s always nice to have a paper map. I always have one of these Gazetteers in my car. You should never be without a paper map, I say.

I love the Gazetteer because it shows lines of elevation and every/any possible road and trail.  It’s incredibly useful for finding summit road and trail access points and also for finding game land entry areas.

Funny, but I opened my new Gazetteer while still in the parking lot of the camping store and almost instantly spotted a brilliant new access point for the Overland Victory trail in Morganton. It’s an even better activation spot than I’ve used in the past.

Last year, I wanted to purchase the latest edition for North Carolina but I’m sure due to the pandemic, they were as rare as hens teeth!

The other week, I found one in a local camping store and grabbed it! The store owner told me he’d only gotten a handful in recently and had been out for months. Check for one at your local camping store, book store or outdoor center. If you can’t find one there, check Amazom.com (affiliate link).

I’m a huge map geek. Although I don’t recall them including topographic information, when I lived in the UK, I was a massive fan of A to Z road maps for their design. I’d love to know if there’s a topo map equivalent.

If you live outside the US, I’d love to know what maps you use for your field activities! Please comment!

Antennas, Field Reports, Morse Code, News, Portable, QRP

Pairing the Chameleon CHA LEFS with the Discovery TX-500 at Table Rock Fish Hatchery

8 Comments

Last time I visited Table Rock Fish Hatchery–this activation–it was a struggle to get the ten contacts I needed for a valid activation. Propagation was horrible that day, making it a proper struggle.

On Thursday, May 20, 2021, I thought I’d go back to the fish hatchery for another try! I really like the site: it’s open, has lots of trees, and the staff (and neighborhood dogs) are all very friendly.

My not-so-QRP diesel truck!

Thing is, as I drove to Table Rock, my buddy Mike informed me that propagation took a nose dive. Earlier in the day, it had been reasonably stable, but he noted that POTA activators were struggling in the afternoon and the propagation numbers were in the dumps.

There’s a beautiful little creek next to the picnic area.

My secret weapon: The Chameleon CHA LEFS

Shortly after I posted my “unboxing” video of the lab599 Discovery TX-500, Carl at Chameleon Antenna made a comment on my YouTube channel that he was going to send me their CHA LEFS (Lightweight End Fed Sloper) wire antenna since it’s resonant on 40, 20, 17, 15, 12 and 10 meters. In many ways, it’s ideally suited to pair with the TX-500 since this transceiver lacks an internal ATU. Side note: there is a cool project in the works called the DIY599 that adds a 60 watt amp and ATU to the TX-500 . 

I had only recently received the CHA LEFS and had not yet taken it to the field. Table Rock was the perfect opportunity.

When I know in advance that propagation is poor, I try to make my portable set up as efficient as possible, so that’s when I 1.) make sure I pull out a resonant wire antenna and 2.) use a wire antenna with longer radiators. The CHA LEFS fits both of these bills.

The CHA LEFS has a 63 foot radiator made of 20 gauge PTFE antenna KEVLAR wire. The winder has a large efficient transformer to match impedance, and there is an inline coil to make the most of the 63′ radiator. They also include 50′ of Micro 90 paracord.

 

Like all Chameleon antennas I’ve used, it’s built to military specs.

Table Rock Fish Hatchery (K-8012)

Table Rock is ideally-suited for a long-ish sloping wire antenna, too. The site has tall trees and open spaces that make stretching out the sloping radiator quite easy. Just watch those power lines!

The CHA LEFS takes longer to deploy that end-fed antennas with a feedpoint near the ground. I find it quicker to deploy, however, than dipoles.

I deployed the LEFS by first stretching out its radiator wire in the direction I planned to deploy it.

Next, I connected the coax feedline to the SO-239 on the LEFS winder and stretched it in the opposite direction of the radiator. Why do this? It helps keep the radiator and coax from twisting together as I raise the winder/feedpoint into the tree.

This is not a difficult antenna to deploy as one person. Of course, if you have a helper, it’ll go even faster (I’ve yet to convince Hazel to help me with antenna deployment).

I had launched the arborist line quite high into a tree at the picnic table where I planned to operate. I was able to elevate the LEFS feedpoint/winder about 47′ into the tree.

I used the supplied paracord to attach the radiator to a nearby branch. The end of the sloper was perhaps 6 feet off the ground (if memory serves).

Gear:

On The Air

Knowing how poor conditions were from real-life K8RAT observations, I didn’t expect to actually validate my activation by logging the required 10 contacts. As I stated in my activation video, I was fully prepared to walk away with three or four contacts–I didn’t have a few hours to burn on an activation. I was simply happy to play with a new antenna, the TX-500, hang with the local canine welcome committee and enjoy the fine weather.

First, I hopped on 40 meters and discovered the LEFS provided a perfect 1:1 match on 7063 kHz. Very promising!

Next, I started calling CQ and the Reverse Beacon Network functionality of the POTA spots page must have quickly auto-spotted me.

Within 13 minutes, I logged six contacts! I was impressed. Mike (K8RAT) was in that first six contacts and he later told me it was one of the strongest signals he’d ever heard from me at a POTA activation. He asked what I was using as an antenna that day and said, “it was working!”

Next, I moved to the 30 meter band and worked K8RAT again (a rarity on 30 meters!) along with four other stations.

I ran out of time, so called it quits with 11 stations logged.

I did not expect to not only walk away with a valid activation, but to have completed it in such short order.

QSO Map

Here’s the QSO Map of my contacts all made with 5 watts of power:

Video

Here’s my real-time, real-life, no-edit video of the entire activation. Next time I take the LEFS out, I’ll try to remember to include setting it up:

Loving the CHA LEFS!

Talk about good first impressions!

As Carl suggested, I’m going to keep the CHA LEFS tucked away along with my PackTenna EFHW in the Discovery TX-500 pack.

When conditions are poor, I’ll spend the modest amount of extra time deploying this fine antenna.

The only CHA LEFS criticism I noted–and it’s a minor one–is that the in-line trap/coil isn’t very low-profile and takes a little attention to make it fall in the right spot when reeling the antenna up post-activation. Seriously. A minor criticism and I’m guessing Chameleon has a reason for it being on the large size–likely for power handling reasons.

Field Day is coming up, and I think I’m going to make the CHA LEFS one of Team Baklava‘s main antennas (Team Baklava = my buddy N3CZ and me!).

As for the CHA LEFS, I highly recommend it!

News, QRP, QRP Radios

This radio is growing on me…

8 Comments

I just got back from an activation at Lake Jame State Park where I used the Xiegu X5105. Radioddity sent this radio on loan at my request for an upcoming review in The Spectrum Monitor magazine.

I must say that I underestimated this little radio…

Impressive play on the internal battery

I’ve now completed 3 activations with the X5105 on one battery charge made three weeks ago!

I charged it before this activation on May 17, then I completed this short activation on May 18. I never expected the battery to keep going, but it did.

This weekend, I used the X5105 in the shack for perhaps 30-40 minutes chasing a few parks and summits on that same charge. During that weekend time it was mostly in receive mode, unlike when I’m activating (and working stations or constantly calling CW).

I decided to see how long it would continue to play off of the internal battery, so I didn’t re-charge it. Instead, today (June 7), I took it to Lake Norman State Park and had an external battery at the ready if it failed mid-activation.

It didn’t fail, though, even after 1.5 hours on the air. The voltage, when I finally gave up, was about 10.2 volts. I ran out of time, not the battery.

I’m impressed.

Internal Microphone

Once I’ve uploaded the video and written the field report (in a week or two), you’ll see that at one point today, I switched to SSB operation. Thing is: I didn’t bring the X5105 hand mic with me–it was 2 hours away at the QTH!

I remembered that the X5105 has a built-in mic–meaning, built into the body–so I decided to give it a go. I mean why not–?

Turns out, it was very easy to operate: simply press the PTT button as you would a mic button and speak. I worked a few SSB contacts this way.

The only other radio I own with an internal mic is the Elecraft KX2.

This X5105 might become permanent

Herein lies the trouble with doing radio reviews: sometimes you get attached. I need to talk with Radioddity.

I’ve been hesitant to take this unit on a SOTA activation because the chances of it getting scratched, etc. increases.

I believe I’m going to add the X5105 to my HF radio arsenal. It’s a fun little radio and it would make the short list for SOTA runs along with the Elecraft KX2 and Discovery TX-500.

News

Saying goodbye to a dear friend–and a special request

4 Comments
Ed operated as FP0AR–one of his favorite family DXpeditions– more than four decades ago.

This past week has been a crazy one.

I set the week aside to catch up on a number of projects and to fit in at least one activation. I did manage that activation on Tuesday–Hazel and I hit the trails and I activated Mount Pisgah.

 

Wednesday, however,  was a different story…

At midday, I received a call from the daughter of a dear ham radio friend telling me that her father–and my friend–was unresponsive and now under hospice care. She didn’t expect him to live much longer, and wanted to know if Vlado (N3CZ) and I could come over to spend a little time at his bedside. A quick call to Vlado, and we instantly dropped everything we were doing; I picked up Vlado at his QTH and we drove the two hours to be with Ed (W2HTI), his wife Eileen (KO4DI), and their children and grandchildren.

It was sad, of course, but Ed indicated that he recognized us and even attempted to communicate as best he could. Needless to say, we were deeply touched and so glad we’d made the trip, even on the long drive home.

Ed (W2HTI) SK

Early Friday morning, only 32 hours later, Ed went silent key.

The good news:  Ed was pushing 91 and had led a very rich, full life. I’m not sure I’ve ever known anyone with the energy level, love of life, and amazing talent to make everyone laugh. This Brooklyn “boy”  and his wife, Eileen, were/are also some of the most generous people I’ve known, and have gone out of their way to treat me and Vlado and our families–and indeed, many DXers over the years– like their own family.

Ed lived at least five full lifetimes, all of them full of adventure with an amazing family.

And did I mention, he was an avid DXer…?

A small request

Ed (W2HTI) on the left and Vlado (N3CZ) on the right during one of our visits in 2019.

You might have guessed that ham radio played a central role in Ed’s life–and still does, for his wife Eileen.  It’s no exaggeration to say, Ed was one of the top radio DXers in the world. Ed also collected QSLs, and his family counts these among his precious possessions, and are making sure they are carefully archived.

Our special request:   For this QSL collecter, there’s no better memorial than QSL cards.  If you have a moment, please consider sending his wife, Eileen a QSL card in memory of this incredible member of the radio community.  Even if you didn’t know Ed,  it would mean a lot, coming from the ham radio world that was such an inspiration to him and his family, to be acknowledged.  Vlado and I are asking this of all the hams we know.  Thank you, friends.

Eileen’s contact information can be found on her QRZ.com page. If you don’t have access to QRZ.com and need her address, simply email me and I’d be happy to provide it.

Thank you!

Thomas (K4SWL)

News, Videos

2021 FDIM presentations now on YouTube!

Leave a comment
Four Days In May is sponsored by the QRP ARCI

Many thanks to Pete (WB9FLW) who writes:

Hi Thomas,

This years virtual FDIM presentations are now available on-line for those who missed it.

Click here to view Part 1 on YouTube.

Click here to view Part 2 on YouTube.

Enjoy!

Thank you for sharing this, Pete! Sadly, I was unable to attend live due to my schedule, so am very happy to see these excellent presentations. I do hope that things will be normal next year and FDIM will happen in person again. If you attend the Hamvention, I strongly encourage you to also take in FDIM–it is always an amazing event.

Field Reports, Morse Code, News, POTA, QRP

Enjoying a casual trailside activation with the Xiegu X5105 and PackTenna 9:1 Unun

Leave a comment

I love day hiking with radios.

When I pack all of my radio gear in a field kit that is compact enough to fit in a small day pack, it forces me to only take the essentials. This, in turn, makes for a quick deployment and pack-up.

I think this is one of the reasons I find Summits On The Air so appealing.

On Tuesday, May 18, 2021, I had a hankering to fit in a hike and, of course, play radio. I also wanted the option to fit in two activations, so needed a simple and short hike to minimize time.

Tuttle Educational State Forest (K-4861)

I decided to head to Tuttle Educational State Forest–one of my favorite accessible POTA sites–because their two mile loop trail was just what the doctor ordered. In fact, I knew exactly where I wanted to set up on the trail.

Tuttle is rarely busy–especially on a Tuesday afternoon.

I arrived on site and, as I was pulling my backpack out of the car, I was greeted by one of the Tuttle park rangers. He was incredibly nice and provided me with even more ideas of places to set up in the future along the trail and trail extensions. We must have chatted for 15-20 minutes–he had a number of questions about amateur radio and I never miss an opportunity to be an ambassador for both ham radio and POTA/WWFF.

Gear:

On The Air

The hike was amazing and, besides park rangers, I had the entire site to myself. About 1.5 miles into the hike, I found the spot I earmarked for this activation: a little open area with three wood benches on the side of the path.

This particular deployment reminded me how thankful I am that I discovered the Arborist Throw Line last year. I had the PackTenna deployed in three minutes.

It was so…effortless.

I decided to take the Xiegu X5105 out for another activation. Radioddity sent this to me on loan for a full evaluation and review. The previous day, I activated the Blue Ridge Parkway with the X5105.  I wanted to see how many activations I could accomplish off of one charge of the X5105’s internal battery, so after the BRP activation, I didn’t re-charge the battery.

As insurance at Tuttle, I brought along my trusty QRP Ranger LiFePo4 battery pack and hooked it up to the X5105. If the X5105’s internal battery died on me, it would be easy to simply turn on the QRP Ranger’s power switch and hop right back on the air.

I started one of my real-time, real-life activation videos (see below), then called CQ on 40 meters.

Maybe that quick antenna deployment was foreshadowing the activation, because in the span of 13 minutes, I logged 11 stations all on 40 meters.

I was very pleased to work P2P (Park To Park) contacts my friends Steve (KC5F) and Scott (KN3A). Thanks, guys, for hunting me!

Here’s my log:

I didn’t even move up to 30 or 20 meters after working the string of contacts on 40 meters because Tuttle is far from being a rare site and I wanted to fit in one more activation that afternoon.

The X5105’s internal battery easily powered the rig for the entire activation (perhaps a total time of 15 minutes). I suppose I’ll have to take it to yet another park on this same charge!

Packing up was nearly as quick as deployment. I owe thanks to one of my YouTube Channel subscribers for suggesting that I pack the Arborist Throw Line pouch by winding figure eight bundles of line on my hand (much like I do with antenna wire) and stuffing them in the pouch one bunch at a time. This saved me a lot of time.

While the portable throw line pouch isn’t as quick to pack as the throw line cube, this method made it a cinch!  I can’t find who originally made the suggestion, but I’m grateful–thank you!

Video

Here’s a link to the full activation video:

Photos

During my loop hike, I snapped a few photos (click to enlarge):


Well hello there, little fella’!

I’m most grateful to the late Ms. Tuttle for leaving this amazing park for all to enjoy. Her legacy protects this land for all future generations.

When you’re doing a park or summit activation, don’t forget to stop and take in a good dose of nature and the outdoors.

It does us all a world of good.

More X5105 thoughts

This second activation had me warming up a bit more to the X5105. I do like its size, and I think it’s a good rig for CW ops.

CW operation is very pleasant, actually, and keying feels natural. I was impressed that the battery held for a second activation, even though this was a very short one.

Again, I think the internal speaker audio leaves a bit to be desired–I dislike the audio splatter I hear at higher volumes–but for $550? It’s really hard to be critical.

During this activation, I still hadn’t learned how to program CW memory keying. A YouTube subscriber recently described the process and it seems overly cumbersome and much more complicated than it was in an earlier firmware version.  I’m going to contact Xiegu about this. Unless I’m missing something, it really holds the radio back from being pretty stellar on CW for the field op.

Readers, if you own the X5105 and can describe the best way to use CW memory keying, please comment with directions! I’d really appreciate it!

Thank you

Thank you once again for reading through this field report and perhaps watching the activation video.

I’d also like to thank the readers and subscribers who’ve recently supported me on Patreon and via PayPal. I am humbled and honored.

Thank you.

Do you enjoy QRPer?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Antennas, How To, News

Max’s simple MFJ-1984 EFHW antenna winder mod

Leave a comment

Many thanks to Max (WG4Z) who writes:

Thomas, my MFJ 1984MP arrived today so looking forward to using a resonant antenna with my 705 but also have the LDG Z-100Plus tuner as a back up.

I’ve seen many antennas that have a winder built in allowing the user to wind in a figure eight fashion. It might help keep the kinks down.

I have fashioned a cord winder for the MFJ 1984 EFHW Antenna. It is a winder made for electrical drop cords and comes in a 3 pack at Lowe’s. Very inexpensive solution for adding it to the MFJ antenna with a couple of zip ties. I’m set to go works some POTA with an efficient antenna. Thanks for your videos deploying the MFJ antenna in the field.

Thank you for sharing this tip, Max! I like how you can so easily secure the antenna to the extension cord winder with cable ties.

While I couldn’t find the three pack link on the Lowe’s website, here’s a link a single winder ($3.48).