Tag Archives: Elecraft KH1

30 Meters with a 4 Foot Whip–? Impromptu POTA Hunting with the Elecraft KH1!

My Elecraft KH1 packed in a Pelican Micro M40 case. This protects my KH1 while traveling around in my EDC backpack.

On Friday, December 8, 2023, playing POTA was not in the plan.

I needed to finish a field report, publish it, then attempt to make a dent in my email and comments backlog. Lately–as you might have noticed–it’s been difficult to keep up with everything.

That morning, I dropped off my daughter at her robotics class, then made my way to the Mills River Library and municipal park.

I arrived at the park around 9:20 AM, parked my car at one of the free EV charging spots, then walked to the library front door only to discover a sign that said they’d be opening an hour late (10:00).

All of the sudden, I had 40 minutes to kill.

Since my Elecraft KH1 now lives in my EDC backpack full-time, I thought, “Why not hunt a little POTA?

I started walking to the baseball field to set up then turned around, went back to the car, and grabbed my action camera. I mean…why not film this session since the camera was in the car trunk/boot? Right–? Right!

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

POTA Hunting!

Keep in mind that the Elecraft KH1 is designed to operate on 20, 17, and 15 meters using the 4 foot whip antenna (assuming you have the internal ATU option).

This was awfully early in the morning for any of those bands–I knew 20 meters would be my best bet of the three.

I tuned around, but I couldn’t hear or work any of the handful of activators on 20 meters. They were all outside my 20M propagation footprint–most were simply too close for 20M.

Then I noticed my buddy, John (AE5X) spotted on the 30 meter band.

For kicks, I tuned down to the 30 meter band, found a clear spot, then hit the ATU button. I was surprised to achieve a 2:1 match!

What?

Of course, a decent impedance match doesn’t equate to efficiency. Then again, what did I have to lose? Nothing…that’s what!

I called John once, but another strong station caught his attention. Once he finished that exchange, I called him again and he replied! Woo hoo!

I suspect my effective power output was around 1-2 watts, but it was enough to make an exchange with John, so I was a very happy camper.

I also tried to work KD8IE on 30 meters, but could not punch through the strong signals from other POTA hunters.

By chance, though, I heard my buddy Eric (WD8RIF) calling CQ POTA just below KD8IE.  I could hear Eric because I had my filter wide open–as in SSB wide.

I tuned  down, called him and he came back with my call and a question mark after two tries.

We exchanged details, sent 72, and logged each other. What fun!

I found out later that my signal level was actually fine on Eric’s end, but I was *almost* outside of his CW filter edges. He struggled hearing me because I was too far from his centered frequency. I didn’t notice this on my end, of course, because I had my filter so wide open.

I’ve learned from this: next time I’ll narrow my filter before hunting stations. The majority of activators do not run with their filters wide open like I do.

By the way, if you’d like to read Eric’s field report from that same time frame, click here.

Video

Here’s the real-time, real-life “Slow TV” video of this hunting session with the KH1:

Click here to view on YouTube.

30M on the KH1 whip!

I’m pretty sure Elecraft wouldn’t recommend using your KH1 on 30 meters with the whip only because of its low efficiency, but I also know the KH1 will have no problem dealing with the 2:1 match. I bet you’d get an even better match if you lengthen the counterpoise–I simply used the supplied 13′ wire.

Of course–and again–30M on a 4′ whip is not an efficient antenna system, but it’s efficient enough to make some contacts! As my buddy Kurt (NT0Z) says, “RF gotta’ go somewhere.

I will check in with N6KR and see what he says about this setup.

Library time

Post activation, I found a comfy spot to work in the library and published a new field report.

It struck me that no one passing by would have ever guessed that I had a full HF station in my backpack! For just a moment, it made me feel like an unassuming Cold War spy!

Oh yeah, the backpack: I took advantage of a Black Friday sale at Trakke and purchased the Bannoch Backpack I’d been eyeing for weeks–the discount was deep!

I justified this purchase knowing that I was doing my bit to support the economy of Scotland! Ha ha! Seriously, though, I do love this backpack.

Thank you!

Thank you for joining me for this mini POTA hunting session!

As I mentioned before, the Patreon platform connected to Vimeo make it possible for me to share videos that are not only 100% ad-free, but also downloadable for offline viewing. The Vimeo account also serves as a third backup for my video files. Click here if you’d like to support me on Patreon. No pressure.

Thanks for spending part of your day with me!

Cheers & 72,

Thomas (K4SWL)

Ham Radio Workbenches On The Air (& POTA): A short field report and a very long activation video!

Many of you know I’m on the crew of the Ham Radio Workbench podcast. In fact, as of this month, I’ve been there a year now (my how time flies).  Although it shows a certain lack of judgement on their part, I’m glad they invited me on board!

On October 9, fellow HRWB crew member, Mark (N6MTS), pitched an idea to us via email:

“What do y’all think about doing an HRWB On The Air event?”

We all agreed it sounded like a great idea. Things like this normally take a year’s worth of planning, promoting, and organizing. Not when Mark’s in charge, though.

Next thing we know, Mark had us sorting out the best date/time (December 3, 2023/1800-22:00UTC) for HRWBOTA and even reached out to some amazing volunteers who helped put together a website and spotting page.

Holy cow!

December 3, 2023

I planned to operate the entire four hour event period from Lake James State Park (K-2730) since it would be an easy detour en route to Hickory, NC (where I was staying that night). Of course, each contact would could for both HRWBOTA and POTA.

The previous day, however, I learned that one of my daughters had a meeting in downtown Asheville from 18:00-19:00 UTC. She doesn’t have a driver’s license yet, so I had to take her. Had it not been an important meeting in advance of her finals, she would have skipped.

This really threw a wrench in the works. I knew that by the time her meeting ended and I dropped her off at the QTH, the earliest I could be at Lake James was 20:15-20:30 or so.

How could I increase my on-the-air HRWBOTA time?

KH1 to the rescue!

Since the Elecraft KH1 was packed in my EDC bag, I decided to play a little HRWBOTA in the parking lot behind the meeting building.

I wasn’t sure what to expect to be honest. I wasn’t spotting myself anywhere but the HRWBOTA spotting page, and I was limited to the 15, 17, and 20M bands with the KH1’s 4′ whip antenna.

I spotted myself, hit the air and started calling CQ HRWBOTA!

In the span of about 45 minutes, I managed to log a total of 15 stations! Not bad considering I was standing in an urban parking lot, swimming in QRM, and going QRP!

I didn’t make a video of this part of the HRWBOTA activation–sorry about that if you worked me then. I needed every moment of on-the-air time I could grab. Here’s my log sheet:

Lake James State Park (K-2739)

I legged it to Lake James after my daughter’s meeting–in fact, to save time, I started my activation video while I was still in my car driving on I-40.

I arrived at Lake James, parked, plugged in the car, grabbed my gear and made my way to the picnic area next to the lakeshore. It wasn’t hard to find a site with a tree that might support my KM4CFT 30/40M linked EFHW antenna.

I include the full antenna deployment and station set-up in my (rather long) activation video below. Continue reading Ham Radio Workbenches On The Air (& POTA): A short field report and a very long activation video!

Video: Comparing the Elecraft KH1 with Mountain Topper Series QRP Transceivers

A couple weeks ago, I posted a video where I compared the Elecraft KH1 and KX2;I mentioned that it was the most requested comparison I’d received after I started taking the Elecraft KH1 to the field.

The second most requested KH1 comparison focused on various Mountain Topper series models: the MTR-3B, MTR-4B and MTR-5B.

That’s what we’ll take a look at in the comparison video below!

Basic KH1 ($550)

So when folks have asked me how the KH1 compares with a Mountain Topper, I think of the basic KH1 ($550 US) package, not the ($1100 US) “Edgewood” package like I have.

Why?

Without the Edgewood package, the KH1 lacks the internal ATU, coils for the whip antenna, internal battery, internal battery charger, logging tray, whip antenna, counterpoise, case, and attachable paddles.

In short, the basic KH1 is a 5 band CW-only radio, much like Mountain Topper series radios–in fact, a lot like my 5 band Mountain Topper!

This is why, in my video below, I base the comparison on the basic KH1 package which includes the KH1, power cord, USB cable, and manual only.

Video

I should note that this video primarily focuses on making a purchase decision–it’s not a receiver comparison or in-depth reviews:

Click here to view on YouTube.

A few notes…

The video above contains a lot more detail, but at the end of the day, you can’t make a “bad” choice here. All of these are fantastic radios for someone who enjoys ultra-light operating.

The Elecraft KH1 is more a more feature-rich transceiver; it has adjustable filters, attenuation, CW encode/decode, mini pan/scan, general coverage, SWR/power meter, more message memories, internal logging options (soon), user upgradable firmware, an internal speaker, and much, much more. On top of that, the KH1 can be upgraded to become a complete shack-in-a-box radio with internal battery, charger, ATU, attachable whip antenna, and attachable paddles.

That said, even thought the Mountain Topper radios are spartan in terms of features compared with the Elecraft KH1, they get the job done effectively. Their feature set is laser-focused on providing a SOTA activator everything they need in order to complete an activation and not a lot else. They will also operate effectively on the smallest of batteries and consume a mere 20-17 mA in receive–proper battery misers! For more of my thoughts of the Mountain Topper, check out my MTR-4B review and my “Getting To Know You” report on the MTR-3B.

Again, you can’t go wrong with a Mountain Topper or a KH1: they’re both made by fantastic companies and have a loyal customer base for good reasons.

Price

The Elecraft KH1 base model (40, 30, 20, 17, and 15 Meters) is $550, the complete, fully-loaded, “Edgewood” package is $1,100. They are currently on backorder, but Elecraft does note that they intend to start shipping again mid-January 2024. Click here for the latest news about lead times.

The Mountain Topper MTR-4B V2.

The LnR Precision MTR-4B (80, 40, 30, and 20 Meters) is the latest Mountain Topper radio and the current model at time of publishing. You can purchase these new for $369 US. LnR Precision builds roughy 25 per month when they have the parts. You will need to follow LnR closely in order to be updated when a production run is shipping. Each time units are offered, they’re snatched up in a matter of hours. You can find used Mountain Toppers out there, but pricing tends to be within 10-20% of the new price.

Thank you

I hope you enjoyed this little comparison video and that it might help you make a purchase decision.

Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon and the Coffee Fund. While certainly not a requirement as my content will always be free, I really appreciate the support.

As I mentioned before, the Patreon platform connected to Vimeo make it possible for me to share videos that are not only 100% ad-free, but also downloadable for offline viewing. The Vimeo account also serves as a third backup for my video files.

Thanks for spending part of your day with me!

Cheers & 72,

Thomas (K4SWL)

Postcard POTA Field Report: Pairing the KH1 with an EFHW at Pisgah National Forest

Welcome to another Postcard Field Report!

If you’ve been following QRPer.com and my YouTube channel for long, you’ll notice that I typically post two field reports with videos per week when my free time allows. Each report takes about four hours to produce along with a video. I’ve got a busy day ahead on the road (including a POTA activation), so in order to squeeze this field report into my schedule, I’m going to use my more abbreviated field report format: a “postcard” format!

Speaking of which….

Pisgah National Forest (K-4510)

On the morning of Friday, November 10, 2023, I had a couple hours to fit in some POTA time.

All morning, we had been receiving some much-needed rain in the form of scattered showers in a constant heavy mist.

I decided to explore picnic areas I hadn’t yet visited in Pisgah National Forest along the Pisgah Highway near Brevard, North Carolina.

I was curious if I might find a small shelter at one of the roadside sites. Unfortunately, I did not; however, I did find quite a few sites that were ideal for POTA with tall trees, space between picnic tables, etc. I decided to pick one at random that had no other park visitors.

I did have a small rainfly in the car I could set up, but I decided to simply risk it. The goal was to pair the new Elecraft KH1 with my (MW0SAW) End-Fed Half-Wave antenna.

I wanted to see if the KH1 ATU could match the EFHW on 30 and 17 meters (outside of its resonant bands of 40, 20, and 15 meters).

Setup

Since I wasn’t using the KH1 pedestrian mobile, I connected my N0SA (“SOTA paddle”) and my Anker Soundcore Mini portable speaker.

Antenna deployment was easy enough (though I did take a few tries to hit *the* tree branch I wanted)!

In no time, I had the KH1 on the air and ready to start calling CQ! Continue reading Postcard POTA Field Report: Pairing the KH1 with an EFHW at Pisgah National Forest

The Elecraft KH1 or KX2? Which one should you buy?

Even before I started taking my Elecraft KH1 to the field and generating reports and activation videos, I started receiving questions from readers and subscribers about how the KH1 might compare with other field-portable radios.

At least 70% of all of these questions asked specifically about the venerable Elecraft KX2.

Making a purchase decision

I’m not surprised so many are trying to make a purchase decision between the KH1 and KX2.

For one thing, the KH1 and KX2 represent some of the smallest, most compact and lightweight shack-in-a-box HF field radios on the market. We’ve a lot of QRP field radios to chose from these days, but few have options for both internal ATUs, internal batteries, and attachable paddles. Very few are as light and compact as either of these two radios.

Another reason for the comparison is that many are in the long queue to purchase a new Elecraft KX2. At time of posting this article, if you place an order for the KX2, you are going to wait a few months for delivery.  The KH1 also has a lead time, but it’s likely shorter than that of the KX2 (check out the Elecraft Shipping Status page for more info).

Comparing models

While the KH1 and KX2 have a lot in common, they’re also quite different in many respects.

We radio ops like to compare features and specifications and Elecraft knew the KX2 and KH1 would be compared frequently, so they created a handy chart:

Click here to download Elecraft’s KX2 v KH1 comparison chart (PDF).

At the end of the day, though, I would argue that one’s enjoyment of a radio has more to do with how well it fits the operating style of the owner.

The KX2 is one of the best portable QRP field radios ever made, in my humble opinion. It’s a little high-performance machine that can handle any mode you care to use between 80-10 meters.

The KH1, on the other hand (pun intended), is designed to be an exceptional handheld radio for pedestrian mobile use and as a super lightweight, low-impact, field portable station. It’s essentially CW-only and operates on 5 bands (40-15 meters).

If you can be honest with yourself about how you plan to use the radio, it’ll help you make this purchase decision.

For example, if you never see yourself operating pedestrian mobile–you’re more of a sit down at a table sort of op–there’s a good argument to go for the KX2. If, however, you’re an avid SOTA/POTA portable activator who is primarily a CW op and you like the idea of a super quick deployment and handheld operating from anytime, anywhere, you should consider the KH1.

Video

To dig into this comparison a little deeper, I decided to make a video where I discuss the differences between the two radios and also speak to different styles of operating and which radio might suit that style best:

Click here to view on YouTube. 

I would be curious which radio you prefer and why. Please consider commenting!

Thank you!

I hope you found this post and video useful.

As always, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon and the Coffee Fund. While certainly not a requirement as my content will always be free, I really appreciate the support.

Patreon supporters have access to 100% ad-free, and downloadable videos for off-line viewing via Vimeo. The Vimeo account also serves as a third backup for my video files. This is how your support truly helps this site and channel!

Cheers & 72,

Thomas (K4SWL)

Elecraft KH1: A Quickie Pedestrian Mobile POTA Activation!

Thursday, November 9, 2023 was a typical “dad taxi” day for me.

By the time I got around to doing a POTA activation that afternoon (which was always on the docket) it was within 30 minutes of when I needed to pick up my daughters.

Fortunately, the Blue Ridge Parkway Folk Art Center was en route to town.

I had planned that day to pair up my Elecraft KH1 with a random wire antenna, but looking at the time, I realized that was being a little ambitious–the few minutes to deploy and pack up the antenna would cut into the activation.

Instead (since I had just received my KH1 logging tray/cover) I decided to put it to the test with a real pedestrian mobile activation using the KH1, its  whip antenna, the logging sheets I printed/cut, and the teeny space pen included with the logging tray. In theory, this all looked doable, but in practice I didn’t know if I would actually be able to log on a tray attached to the side of my radio!

I had planned to use my Zoom H1n recorder for the KH1 audio since I would be making an activation video (see below), but frankly, I simply didn’t have time to set it up. I had to make do with the KH1 wee speaker.

Speaking of the speaker…

After playing with the speaker for a few weeks now, I’ve found that it sounds much better when I run the KH1 with a wide CW filter.

I’d always assumed being a low-fidelity 1″ speaker that narrow audio would be best, but I was wrong about that. In the field, I tinker with the filter and attenuation settings for the best audio balance.

Still, it’s not perfect (the speaker is really a “bonus” feature) but it’s much improved over my initial POTA activation.

Of course, I would have been using earphones had I not been recording the activation on camera. Via earphones, the KH1 audio is excellent!

Gear:

Note: All Amazon links are affiliate links that support QRPer.com at no cost to you.

On The Air

I hopped on the air, started calling CQ POTA, and the stations started rolling in. Continue reading Elecraft KH1: A Quickie Pedestrian Mobile POTA Activation!

Seal the Deal: Exploring the Best Watertight Cases for the Elecraft KH1

Well before I actually had a KH1 in hand, I noted the dimensions of the radio from the preliminary spec sheet and started exploring the world of compact, watertight cases.

Why a watertight case?

This Pelican 1060 case houses a complete Mountain Topper MTR-3B field kit including a throw line and throw weight.

I like to have a watertight case option for pretty much any QRP radio I take on SOTA (Summits On The Air) activations.

It’s reassuring to know that if I stumble and fall on my pack, the case will prevent me from crushing the radio. In addition, a good case keeps my radio dry if I get caught in heavy rains or (even more likely) slip on a rock and fall in a river/creek. In fact, many of these watertight cases will float with the KH1 inside so if it goes overboard while kayak mobile, it’ll be easy to retrieve. (For the record: I don’t want to test this theory.)

With one exception, all of the cases I explore here cost somewhere between $25-$40. I consider this cheap insurance for a $500-1100 radio.

My requirements

I searched a few manufacturer’s websites and tried to find interior dimensions that would accommodate the KH1 and all protrusions: 1.4”H x 2.4”W x 5.6”L (3.5×6.1x14cm).

I primarily searched two watertight case manufactures: Pelican and Nanuk. I trust products from both of these companies and both offer compact watertight cases. There are more manufacturers out there, but but both of these companies offer quality products. Pelican cases are even made here in the USA. Many Nanuk models are made in Canada, but not their Nano series included here.

In the end, I was searching for two case sizes:

  1. A compact case to only hold the KH1 “Edgewood” package: the KH1 with paddle attached, Cover/Logging Tray, Whip Antenna, and 13′ Counterpoise. There also needed to be enough room for a pair of earphones.
  2. A slightly larger case that would accommodate the KH1 “Edgewood” package along with earphones, a throw line, throw weight (or rock sack), and a simple random wire antenna.

The idea with the second, slightly larger, case is that it would give me the option to use a wire antenna during an activation and would be fully self-contained (meaning, everything needed for the activation included).

The contenders

I took a total of eight cases to a local park and spread them out on a picnic table for this test. This made the process of comparing the cases quite easy. I actually made a video of this whole process–you’ll find the video further below in this post.

Here are the cases I tested in the order you find them in the video (any Amazon links here are affiliate and support QRPer.com):

Hint: many of these cases are available in multiple colors–prices can vary greatly based on the color. A red case might cost as must as 30% less than a black case, for example.  Always check the pricing of color options, but make sure you don’t accidentally select a different size case in the process (this is easy to do).

Again, you’ll see a lot of detail in the video below, but let’s look at each of these cases with my notes: Continue reading Seal the Deal: Exploring the Best Watertight Cases for the Elecraft KH1

Elecraft KH1 + Speaker Wire = Pileup Madness on Bakers Mountain!

Since the beginning of November, I’ve been pushing my Elecraft KH1 activations to the front of the line so that readers and subscribers who are considering this wee handheld radio might get a chance to see and hear it in action.

So far, I’ve used the KH1 for what it was designed to do: pedestrian mobile/handheld using the built-in whip antenna. I’ve activated a park, a summit, and even did a little parking lot POTA hunting.

I’ve decided that November is KH1 month–this is the only radio I’ll use this month.

I will start blending in some of my field reports from October (there were some really fun ones in there) that feature my other field radios and a variety of antennas starting next week. I’ll still be pushing some of my KH1 field reports to the front during that time as well. Also, I’ll likely post more bonus videos over on Patreon.

Where to activate?

On Monday, November 6, 2023, I had several hours in the afternoon to take the KH1 on another mini radio adventure. I wasn’t sure where I’d perform an activation, though.

This time, I didn’t want to do a pedestrian mobile activation. I wanted to see how the KH1 might play on my kneeboard and how it might pair with my 28.5′ speaker wire antenna. I was curious if its internal ATU would find acceptable matches on all bands.

I packed the KH1, throw line bag, Tufteln Kneeboard, Helinox chair, 2L water bag, camera gear, and speaker wire antenna in my GoRuck pack (FYI: all links and full inventory are below).

This was more gear than I’d need, but all of these items were in my radio box in the trunk/boot of my car.

I had only one errand to run that afternoon: I needed to drop off some of my wife’s illustrated Christmas cards at my friend Hamilton William’s Gallery in downtown Morganton.

After catching up with Hamilton, I had to make a decision about where to go for an activation. I knew this: it was an incredibly beautiful day, so whatever I did, it needed to include a hike!

I considered a few parks but the most convenient spot for a proper hike was Bakers Mountain. It also required the least amount of driving since it was essentially on the way back to Hickory.

Bakers Mountain (W4C/WP-007)

It being an early Monday afternoon, there weren’t many other hikers at Bakers Mountain. In fact, I never ran into any other hikers on the main loop trail.

Bakers Mountain park is (sadly) not a POTA entity. It’s a county park, so does not currently qualify. There was talk once of Bakers Mountain being turned into a state park, but it falls just shy of the amount of acreage needed to qualify.

Bakers Mountain is a one point SOTA summit, but the hike (if you do the full loop trail) is actually pretty strenuous if you take it at a nice clip. I’d consider it a moderate hike overall.

I’ve already activated Bakers Mountain this year, so this activation’s point will not add to my goal of reaching Mountain Goat (1,000 points). That’s okay, though. Unless my family life changes in a way that frees up a lot more time, Mountain Goat is a good 5-6 years in the future at my pace! I’m perfectly fine with that.

I reached the summit and found a spot to set up in the shade. Continue reading Elecraft KH1 + Speaker Wire = Pileup Madness on Bakers Mountain!

Elecraft KH1 CW Message Memories

Yesterday, I updated the firmware in my Elecraft KH1 with a beta release we’re evaluating in the KH1 volunteer test group. This beta release includes CW message memories and CW send/receive decoding. At first blush, both seem to work really well.

I updated my KH1 while having lunch at my buddy Vlado’s (N3CZ) QTH. Elecraft makes the process so simple: download their utility, download the firmware file, connect the supplied USB cable to the PC and the radio, and make one setting change on the KH1 for it to receive data. That’s pretty much it.

I loaded the firmware right before I walked out the door and then programmed the message memories at K-3378 where I had less than 20 minutes to perform an activation (that video will be posted soon). I had no notes, no manual, and sorted out how to record the messages with no problem whatsoever. The process is very intuitive. I even recorded all three messages correctly on the first go.

I’d already given thought to what messages would go where–one message is very specific to the KH1.

Here’s what I recorded in the three message memory slots:

  1. “CQ POTA DE K4SWL”
  2. “BK TU TU 72 DE K4SWL”
  3. “AS AS DE K4SWL”

Number three is there for when I need to change log sheets in the KH1 logging tray!

AS is a CW Prosign that means, “Wait” or “Hang on.” Since it’s a Prosign, you send AS as one character (dit dah dit dit dit)–no space between the A and S.

I just hit that #3 memory then take my time flipping log sheets!

On my other field radios with CW message memories, I tend to give memory #1 a CQ POTA, memory #2 a CQ SOTA, then the third memory a 73/72 message.

In the early days of POTA, I used my “CQ POTA DE K4SWL” message memory a lot in beacon/repeat mode because we had a mere fraction of the hunters we have today.

These days, I find that I only end up calling CQ POTA two or three times–just enough for the RBN to pick me up. Once spotted? I almost never need to call CQ again and if I do, it’s easy enough to do that by hand. POTA has grown in numbers so much since the early days.

There’s no SOTA CQ on the KH1 for this same reason. I find I only need to call CQ enough for the RBN to find me.

Anyway, just a random Friday note for you!

I had a problem uploading my latest SOTA activation video with the KH1. I hope to have it published later this weekend or on Monday at the latest.

Have a great weekend–I hope you have a moment to play a little radio!

Cheers & 72,

Thomas (K4SWL)

My first SOTA activation with the new Elecraft KH1 handheld QRP transceiver!

On Friday, November 3, 2023, I had planned to activate Mount Mitchell–the highest summit in eastern North America. I need to activate Mitchell soon because I’ve yet to activate it for SOTA in 2023 and when winter weather sets in (quite early at that altitude) the park is inaccessible.

Unfortunately, last week, the National Park Service closed an 8 mile portion of the Blue Ridge Parkway due to (no kidding) park visitors feeding and trying to hold bears at the Lane Pinnacle Overlook.

I won’t get on my soapbox about how people are so out of touch with nature that they feel human interaction with bears is a good thing. It breaks my heart because as we natives of WNC say, “a fed bear is a dead bear.” Bears that become comfortable with humans become (at best) a nuisance and (at worst) aggressive.  This is bad for people and it’s bad for our bears who are otherwise shy and avoid humans.

Okay, I said I wouldn’t soapbox about this…

That 8 mile section being closed meant that what would have been a 50 minute drive to the summit of Mitchell turned into a 90 minute drive. Round trip, I simply couldn’t fit that in my day, so I made alternate plans.

Another summit on my list to activate before year’s end was Richland Balsam.

Richland Balsam is actually the highest summit on the Blue Ridge Parkway and is, in fact, at one of my favorite points along the parkway.

That  Friday morning, I dropped my daughters off at their classes and drove an hour or so to the Haywood-Jackson Overlook.

In the valley, as I started my drive to the parkway, past the Cradle of Forestry, it was 30F/-1C. I was concerned that on the summit–nearly 4,000′ higher in elevation–that the temp would be closer to 20F. Fortunately for me, as I gained elevation, the temperature climbed too. We were having inversion that day so the higher altitudes were actually warmer than lower altitudes. This is not uncommon in the fall and was very welcome that particular Friday morning!

Richland Balsam (W4C/WM-003)

Only three weeks earlier, there would have been no free parking spots at the Haywood-Jackson Overlook overlook–it would have been packed.

Fortunately for me, all of the leaf-lookers had gone and I literally had the place to myself. What a luxury!

And the temperature? A balmy 43F/6C.

The hike to Richland Balsam is one of the easiest along the parkway.

At the north side of the parking area, you’ll see a trailhead for the Richland Balsam Nature Loop Trail.

I wish my iPhone camera could haver truly captured how the moon looked in the sky.

The trail isn’t long; I believe the entire loop is just shy of 1.5 miles.

Although I didn’t set out to do this, I ended up making a video of the entire loop trail hike along with the activation (of course, you can skip over those parts in my activation video below).

Sadly, one thing you won’t be able to enjoy in my video? The smell. The air is filled with the fragrance of balsam trees along the entire trail–it’s just amazing!

The summit of Richland Balsam is at 6,410 feet ASL (1,954 meters).

The summit is covered in trees which is brilliant for SOTA activators. Another luxury is that there are two benches within the activation zone. I did pack my Helinox Zero chair as a backup, but didn’t need it.

SOTA with the KH1

Setting up my KH1 for a SOTA activation couldn’t be easier or faster. I show the whole process in my video at a very casual pace. Continue reading My first SOTA activation with the new Elecraft KH1 handheld QRP transceiver!