Do you usually try to use an isolator or do you often let your wires touch branches by just pulling them over? When you deploy 20m EFHWs, for example, do you try to avoid having an end touch a branch and only have the throw line going over the branch? I tried to go through your videos and look but you don’t often mention how far you pull the wire up and possibly over. Thanks!
This is a great question!
Before I answer, I’d like to add a little context:
I am a QRP operator. The maximum amount of power I use in the field is 10 watts, but 99.5% of the time, it’s actually 5 watts or even much less.
I am answering this as a field operator, meaning I’ll be referring to temporaryantenna deployments.
That said, the quick answer is no, during park and summit activations, I do not worry about my antenna radiator wire touching tree branches.
I do isolate the end of my wire antennas from tree branches and leaves, but I don’t worry about other parts of the radiator touching.
Also, all of my antenna wire has some sort of jacket–I don’t run bare wire in the field.
Since I first met Brooks, he’s always had a goal of learning CW and activating parks and summits using Morse Code.
I’ve been in touch with Brooks regularly over the past year and have followed him as he progressed on his CW journey.
Though, like me, he has an active family life, Brooks has found the time to practice CW both through lessons and actual on-the-air contacts. Fortunately, this is all possible because–again, like me–his wife and family are very supportive of his amateur radio adventures!
Early this year, we met on 80 meters and had a good one hour rag chew at about 12 words per minute. I could tell he was ready to do his first POTA activation in CW.
To give him a little real-world practice, we decided to hit the field on a day when I was performing an activation and he could log for me in real-time.
Fast-forward to 8:30 AM on March 24 when Brooks and I met at the Folk Art Center on the Blue Ridge Parkway. Coincidentally, this is the same location where I performed my first CW activation!
We deployed his MFJ-1984MP 40 meter EFHW (End-Fed Half Wave) and connected it to his Xiegu X5105 transceiver in very short order. Brooks also chose his lucky CW Morse paddle for this activation.
But before hopping into the field report, let’s back up just a bit…
First CW Activation: Getting there…
Brooks very kindly wanted to share a bit about his CW journey in this field report. He writes:
From the moment I knew of its existence, becoming a POTA activator using CW has been at the top of my “radio bucket list.”
It seemed like the ultimate challenge and I knew I would never be satisfied until I was able to confidently activate parks using CW. There is also a bit of mystique to CW that other modes lack, making it inherently more interesting to me. In this article, I am going to share the path I took to learn CW and how it culminated in a very successful CW activation.
A couple years ago, I started making Hike & Talk video sessions covering in-depth topics that are challenging to answer via email or even long-format blog posts.
When I receive a question from a reader and think to myself, “I’d rather answer that in-person than write a reply,” I make a note to do a Hike & Talk session.
These sessions are not scripted, outlined, or formatted in any way shape or form. When I make a Hike and Talk video, I imagine that I’m chatting away with you informally as you join me on a hike or walk.
All this to say that these long-format videos aren’t for everyone, so if it doesn’t sound like your cuppa’ tea, it’s okay to skip it! I promise, I won’t be offended.
Conquering the CW Doldrums
On January 11, 2023, I was driving back from Raleigh and decided that a quick POTA break was in order. That morning, I read an email from a reader and it was on my mind as I drove to Tuttle Educational State Forest. It was a long email, but here are the relevant bits:
Hi Thomas […]I’ve been studying CW on my own for about four months now. I know you advise joining a group like the Long Island CW Club to learn CW but my work schedule simply doesn’t allow for this. I travel frequently and have team members across the globe so my schedule is a mess. I have so little free time.
[…]I’ve been using various CW apps, CW recordings like W1AW and your videos to practice CW. I can’t stress how much your videos have encouraged me along the way because you make this all seem so achievable. I download your videos from Patreon and listen to them when driving, flying, during layovers, and in the evenings in my hotel room. Many times I just listen to your video audio as I would a podcast.
I am not at a point where I can understand all of the contacts you receive, but I do get maybe 1 out of 3. It’s a real thrill to know I decoded a callsign on my own. I see a day when I will do CW activations.
[…]I’m writing though because I feel like I’ve reached a barrier. I know all of my characters and numbers and I continue to do regular CW practice, but I feel like I’m not learning. Like my brain has stopped soaking up the code. It’s discouraging. Do you have any advice for getting through this?
I’ve received similar emails and comments in the past which is proof that you’re not alone if you can relate to this reader.
I’ve certainly been there, too!
Hike & Talk
In this video I will talk about the CW Doldrums, how I related to them, and how I work through them myself.
I include (against my better judgement!) a very long side story about my path to learning French. It relates, but perhaps not how you might think.
Instead of editing my videos, I always try to include chapter markings in the YouTube timeline so you can skip over any sections that aren’t of interest to you.
You’re going to need a few cups of coffee or tea for this one. You’ve been warned!
Thank you for joining me on this Hike & Talk session!
If you’re experiencing or have experienced the CW Doldrums yourself, let us know how you work through them in the comments section.
The important part is to know that you’re not alone and that, in fact, the Doldrums are truly a healthy sign that you’re learning CW and your brain is doing it’s thing!
As always, a special thanks to those of you who have been supporting the site and channel through Patreon and the Coffee Fund. While certainly not a requirement as my content will always be free, I really appreciate the support.
Thanks for spending part of your day with me on the trail!
On Friday, October 7, 2022, I had a couple of errands to run in/around Morganton, NC. Of course, I always have POTA in mind so squeezed in an activation at nearby Tuttle Educational State Forest that morning. That activation took longer than expected due to swapping out antennas and radios, but it was a success and quite fun.
After Tuttle, I knew I could fit in one more activation if I made it quick, so I set my sights on Table Rock Fish Hatchery (K-8012), but first I had a couple of errands to run in Morganton!
I visited my friend Hamilton at his ceramics studio, popped by another store to pick up a couple of items, then (on Hamilton’s advice) grabbed lunch at the The Grind Café.
I must say that Hamilton was spot-on. My wrap was delicious!
Just what I needed to fuel another POTA activation, right? Right!
After lunch, I drove to Table Rock Fish Hatchery. The weather was ideal and the leaves were beginning to show color.
At our home in the mountains, we were almost at peak leaf color, but the fish hatchery site is much lower in elevation. The weather was simply ideal.
Connecting an international community through low-power field radio adventures.
Please support QRPer by adding us to your whitelist in your ad blocker. Ads are what helps us stay online. All of our ads are ham radio related--no junk, we promise! Thank you!
Many thanks to Keysrawk on my YouTube channel, who asks:
