Category Archives: Articles

Accessories, Articles, Field Radio Kits, Grab And Go, News, Portable, POTA, QRP, Radio Field Craft, SOTA, Travel, Videos

What’s in My Travel Radio Backpack? Summer Activations in Canada

9 Comments

Besides radio, one thing I love to geek out about is bags, pouches, backpacks—and more specifically—how and what I pack.

In fact, some of my favorite YouTube videos are those where the host shows how they pack for, say, summer travels in Asia, a one-week business trip to Helsinki, or what’s in their Everyday Carry (EDC).

Although this is one of my favorite types of videos, I don’t make enough of them about my own philosophy of packing: what I take, how I pack it, and how it all works in the field.

My Canada Backpack

If you’ve been watching my videos for long, you’ve probably noticed that one of my favorite field backpacks is the one with a Canadian flag on the front:

It’s a 21L GoRuck GR1 USA. I’ve owned this backpack for the better part of a decade and use it for both field radio and travel. I’ve many other backpacks, but this one is just the right size for almost any of my radio adventures. It also meets the “personal carry-on” size restrictions for even low-cost carriers (at least, at the time of posting). I’ve packed this—with radio—for a week of air travel. I’ve also taken this pack on numerous SOTA hikes.

I have other backpacks I love, but this one strikes the right balance of being big enough without being too big. The main compartment is boxy, somewhat structured, and fits some of my longest field kit items: my Joby Tripod with action camera attached, hiking sticks, Helinox Chair, and carbon fiber telescoping mast.

Ready for Any Activation

While here in Canada, I’ll be activating parks I’ve never visited before, so I need to be prepared for just about any situation. I’m also activating a lot of urban parks in and around Québec City.

When I packed for this trip, I assumed that some of the parks wouldn’t have picnic tables—and some might not even have available park benches. That’s why I pack a collapsible hiking chair and folding knee board. With those, all I need is a flat spot on the ground and I can operate comfortably and complete an activation.

Somewhat Modular

In my pack, there are core items I don’t take out, like my:

  • Helinox Chair and Ground Sheet
  • Folding Knee Board
  • POTA20 Explorer Mast
  • Logging Pad and Pencil
  • Throw Line and Weight
  • A few antenna options
  • A LiPo battery and USB charger
  • Garmin InReach
  • Headlamp
  • Camera and Audio recording Gear
  • First Aid, Sunscreen, Nitrile Gloves (for picking up rubbish), etc.

I do, however, rotate the radio kit inside.

My KX2 Field Kit

For example, in this video, I feature my venerable Elecraft KX2 kit (see photos above).

My MTR-3B Kit

But I can take that one out and replace it with either my Elecraft KH1, CFT1, or MTR-3B field kits.

My KH1 Kit

They are all packed in small Pelican cases that easily fit in the center of my backpack.

Weight

When fully loaded, my backpack isn’t exactly lightweight. Besides all of my radio gear, I’m usually packing a bottle of water too. I haven’t weighed it, but it’s relatively heavy. That’s not an issue for POTA since I’m rarely walking more than 10 minutes (and often just 2 minutes) to find a site to set up.

For SOTA outings or hikes that are an hour or more, I shed any items I know I won’t need. That frees up space for more water and lightens the overall load.

For example, on SOTA hikes I plan to only take my Elecraft KH1 transceiver and a few accessories. That means I can leave behind cable assemblies, extra keys and key base, POTA20 mast, ground spike, and throw line and weight. (The KH1 kit includes a minimalist throw line/weight if needed.) It significantly reduces the pack weight.

In fact, I brought a second, smaller backpack for times when I want to go very minimalist with the KH1 or MTR-3B. Both have fully self-contained field kits in individual Pelican cases. This smaller backpack is perfect when I’m with family—say, spending the day in Vieux Québec visiting museums, shops, restaurants, and one or two urban parks where I can squeeze in activations.

Extras

Note that there are a few extras always in my car that I didn’t include in the video because they typically stay there: my portable table, HT, and a 2-liter water bladder.

Also, a bedroll that we use for family picnics. All of these items work for both field radio, family picnics, and lounging on the shores of the mighty St-Lawrence.

All of these items get heavy use since our family spends so much time outdoors.

Video

In the video tour of my field radio backpack from this trip to Canada, I take you through each individual item I packed. Below, you’ll find links to each item (when available), in the order they appear in the video.

Click here to view on YouTube.

Gear List

Note: All Amazon, CW Morse, ABR, Chelegance, Spooltenna, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

(In order of the video presentation.)

Outer Pocket, Outside Flap

Top Pocket, Inside Flap

Lower Pocket, Inside Flap

Main Compartment

Interior Zippered Pouch

Interior (Ruck Plate) Pouch

Outside of Pack

More to come!

My smaller GoRuck BulletRuck

This video didn’t take long to shoot because, as you know, I don’t edit my videos—they are what they are.

Putting together all of the links and video chapters, however, takes a long time. I do plan to make a video of my other, more minimalist backpack and my new Red Oxx Gator EDC bag I’m using for all of my extra supplies.

My Red Oxx Gator EDC Bag

I’d love to hear your comments about your own field packs—and I especially enjoy your Field Radio Kit posts for our Field Radio Kit Gallery!

Thank you

Thanks for reading this post—I hope you enjoyed the “What’s in my pack?” video. I certainly enjoyed the process. It was a fun excuse to nerd out about packing!

Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon, and the Coffee Fund. While not a requirement, as my content will always be free, I really appreciate the support.

Thanks for spending part of your day with me!

Cheers & 72,
Thomas (K4SWL / VY2SW)

Articles, How To, News, QRP Radios

Want To Buy (WTB) Ads? Beware of scammers, they’re getting clever.

17 Comments

Over the past couple of years, I’d been casually watching the used market for a Kenwood TH-D72A handheld. Last summer, I started searching in earnest—I wanted one specifically for portable full-duplex satellite work.

For discontinued gear like this, instead of waiting for one to show up, I’ll often post a “WTB” (Want To Buy) ad on a classifieds site like QTH.com. In the past, I’ve had good luck with this approach.

This time around, I did eventually find a legitimate seller and now have a TH-D72 in my shack. But before that? I had to navigate several scam attempts—five of the six replies I received were from scammers.

And let me tell you: scammers are getting much more convincing.

Although this happened to me last year, in the past couple of months I’ve heard from several readers who’ve lost serious money through online classifieds—sometimes for high-end transceivers.

One story in particular prompted me to finally dust off this post from my drafts folder and finish it.

Please note: this isn’t a comprehensive guide. It’s simply a rundown of the real-world steps I take and the red flags I watch for. As scammers increasingly adopt powerful AI tools and become more sophisticated, I think it’s worth sharing how I approach online swap meets these days.

Rule #1: Assume Every Seller Is a Scammer Until Proven Otherwise

I walk into every transaction—whether I’m buying or selling—with a healthy dose of skepticism. That may sound cynical, but it’s saved me from a lot of headaches.

Scammers can pose as both buyers and sellers. They prey on your sense of trust, often impersonating legitimate hams. QTH.com knows this too; before posting an ad, you must confirm you’ve read their scam policy, which is packed with great advice.

Rule #2: Use QRZ.com to Vet Callsigns and Email

QRZ.com is the de facto database for amateur radio contact info. You need a QRZ.com account to view someone’s email address. If a person’s callsign profile has no email address listed, that’s a red flag. Scammers often impersonate real hams who don’t list an email—making it nearly impossible to verify their identity directly.

When someone replies to your ad, see how they contacted you. If they use your email from QRZ but don’t also reach out via the classifieds site’s internal classifieds contact form/messaging system (QTH.com or QRZ.com), be cautious. I usually confirm a response by emailing the address listed on QRZ.com directly and saying, “Hey—just confirming this reply came from you.”

Rule #3: If the Price Feels Too Good, It Probably Is

In my case, TH-D72A prices range between $250–$375 depending on condition, included accessories, etc. Some appear for $400+, but those rarely move quickly. The first day I posted my WTB ad, I got three responses: two were priced well below market. All three were scams.

Scammers study the market carefully. They want to offer something just cheap enough to be irresistible—but not so low that you question it. The key is to know your gear’s current market value, both new and used. If it feels like a steal, slow down and verify everything.

Rule #4: Call the Seller (They’ll Usually Be Glad You Did)

I make it a hard rule: I never send money to someone I haven’t spoken with on the phone. This may sound old school, but it works.

What’s more—I’ve never had a legitimate seller refuse a phone call. In fact, those calls usually help build rapport and trust. Most sellers are happy to chat about the gear, how long they’ve had it, what condition it’s in, and why they’re selling.

If someone avoids a phone call or keeps dodging it? That’s a major red flag in my book.

Rule #5: AI Has Made Scammers More Polished Than Ever

Scammers now use AI to clean up their writing, correct grammar, and even simulate a natural tone. The sloppy typos and awkward phrasing we once looked for? Those are becoming less common.

That’s not to say grammar is irrelevant—if a message sounds “off,” trust your instincts. But don’t rely on spelling alone to spot a scam. Assume a message might be AI-assisted and ask deeper questions instead.

Rule #6: Ask for Fresh Photos with Handwritten Details

Scammers often reuse real images from previous listings or scrape them from the web. I’ve had five scam replies with convincing product photos and callsigns printed on paper. But every single one was fake–they used AI or a graphics tool to superimpose a callsign on a what looks like a white sheet of paper.

What I now ask for:

Two photos of the item, from two different angles, with a handwritten note that includes:

  • The seller’s callsign
  • Their first name
  • The full date (month/day/year)

The note must be:

  • Handwritten on plain paper (no digital overlays or re-used images, no QSL cards because they’re easier to cut and paste into an image)
  • Placed next to the actual item, not just the box
  • Clear and visible in the same photo as the item

This request (mostly based on QRZ.com swap meet posting requirements) helps filter out scammers. Why? Because scammers almost certainly don’t have the item in hand—and they definitely can’t easily produce two unique images of the same gear and note from two different angles. This is something easily done by someone taking a photo of the item in front of them (simply reposition your camera for two shots). It’s extremely difficult to do this convincingly with AI.

As of mid-2025, AI-generated images still struggle with replicating specific devices like radios from multiple angles.

Bonus Tip: Compare the photo you receive to manufacturer stock images. If the item looks slightly off in terms of proportions, buttons, or layout, it might be AI-generated.

Here an example of an AI-generated image I requested:

The AI image, at first blush, looks reasonably convincing, but the notepaper is standing up on edge, the handwriting is super neat, and the image has a surreal quality to it—not like a real photo.

Of course, comparing the AI image with the actual Kenwood stock image (see below–taken directly from the Kenwood website) reveals numerous product discrepancies in button layout, display, size, etc.

If a seller pushes back too hard on your photo request or seems annoyed? Consider that a warning sign. If they’re not comfortable with this low-effort verification step, they might not be great to deal with down the line either.

Payment: A Few Extra Best Practices I Follow

  • Use PayPal “Goods & Services” — never “Friends & Family” unless it’s someone you know personally.
  • Some sellers request Friends and Family (F&F) because they don’t wan to to pay the PayPal fee. If this is the case, I add 3% to cover the G&S fee if needed.
  • Avoid Zelle, Venmo, or gift cards unless it’s a local, in-person exchange–say, at a hamfest or convention.
  • Again, always talk on the phone before sending payment. It’s always a bonus verification if the sellers’ area code matches their QRZ physical location.

In Closing

The online ham classifieds are a great way to find gear—especially discontinued or rare items that don’t often pop-up at local hamfests. But the environment is changing. Scammers are adapting fast, and AI is helping them sound more convincing than ever.

I still love buying and (on rare occasions) selling gear this way—but I walk in carefully. This post isn’t a masterclass in fraud prevention, just a collection of my habits, red flags, and lessons learned. I hope it helps someone else avoid falling for a scam.

If you’ve got tips of your own, feel free to share them with us in the comments section. Let’s keep the community strong and informed.

Stay smart and safe out there—good hunting!

—Thomas (K4SWL)

Articles, How To, News, POTA, Skills, SOTA

Bitten By the Bug? Staying Safe from Ticks, Mosquitoes, and Other Blood-Sucking Nasties in the Field

13 Comments

If you’ve been following my field reports for any length of time, you’ll know I’m a huge fan of activating in wooded, remote, and sometimes… bug-infested places. But one thing I never take lightly is protecting myself—and my family (including Hazel!)—from ticks, mosquitoes, and other biting bugs that can really ruin an outing or worse.

Why It Matters

Ticks are more than just a nuisance. In many parts of the world—including right here in eastern North America—they carry diseases like Lyme and others that can have serious, long-term consequences. They’re not just a seasonal inconvenience; they can be a life-changing encounter if you’re not careful. And our four-legged trail companions? They’re just as vulnerable.

Mosquitoes are no joke either. While disease-carrying mosquitoes are more prevalent in other regions, we still have occasional cases of West Nile Virus, and for those who are allergic, mosquito bites can cause serious reactions. At the very least, they’re a major distraction during activations.

My Defense Strategy

Over the years, I’ve built up a toolkit of bug-defense tactics that vary depending on location, season, and bug density.

Please note: many of the links below link to Amazon and are affiliate links that support QRPer.com at no cost to you. 

“Natural” On-Skin Treatments

If I’m in a place like the mountains of North Carolina—especially outside of the heavy tick season (typically spring)—I’ll often reach for more natural repellents. Here are a couple I use:

  • Repel Plant-Based Lemon Eucalyptus Insect Repellent
    This one’s a favorite. It’s DEET-free and surprisingly effective. I’ve even used it successfully in the Maritimes of Canada, where mosquitoes can be relentless. Every time I catch its scent, it brings back memories of hiking through PEI, Nova Scotia, and New Brunswick.
  • No Natz
    A kind reader sent me a bottle last year, and it’s worked well so far in low-density insect areas. It has a milder scent than Repel, but I haven’t tested it in high-tick or mozzie zones yet.

DEET

I have a real love/hate relationship with DEET. It works, no doubt.

When I’m in an area with heavy mosquito and tick populations, I’ll reluctantly use it—but only as a last resort. I dislike the feel of it on my skin when I’m sweating. It also has this odd side effect: if it gets near my lips, it makes them go numb.

That said, it’s very effective and widely available.

Be aware: DEET can damage certain plastics and synthetic fabrics—your radio gear, GPS screens, and eyeglass frames included—so use it cautiously. Still, it’s more effective (from my point of view) than many of the natural options.

If I’m plotting activations in the backwoods of Alaska where mosquitoes are the size of birds? Yeah, I’m going to use DEET.

The brands I tend to use (although, honestly, I’m not sure there’s much of a difference because the percentage of DEET is a more important indicator) are:

  • Deep Woods Off – You can find these bottles in any local retailer as well. I find that their 25% DEET concentration works in most situations.
  • Coleman 100% Max – These bottles are small and easily fit in my backpack. It’s a very high concentration of DEET (98.11%) so I use it when in areas with a high concentrations of mozzies or ticks.
  • Repel 100 – These are like the Coleman bottles above (98.11% DEET) and you’ve likely seen me use them in videos in the past. I do like these pump spray bottles for backpacking.

Clothing Choice

Bug season usually overlaps with hot, sunny weather, so I wear lightweight, breathable long-sleeve shirts and trousers—typically light in color so ticks are easier to spot. I also wear a wide-brimmed Tilley sunhat, which pulls double duty as sun and bug protection.

I also pack a mosquito head net that fits over my wide-brimmed hat. Frankly, I rarely operate where I need to use this, but I appreciate knowing it’s tucked away in my backpack just in case. This net also works well if I’m hiking through an area heavy with gnats–keeps them out of my eyes!

Treating Your Clothing with Permethrin

Of all the bug-fighting strategies, treating clothing with permethrin has been the most effective for me.

I started using permethrin when traveling to rural parts of Belize where malaria-carrying mosquitoes are a real threat. I treated my hat, shirt, trousers, and shoes, and while my colleagues were constantly swatting bugs, I barely noticed them. Not one single bite.

My go-to product: 

Sawyer Products SP649 Premium Permethrin Clothing Insect Repellent Trigger Spray (12 oz).

Important notes:

  • One treatment lasts for six weeks or six washings. When applying on your clothes, the product needs to penetrate the fibers, so apply it quite liberally almost making each article wet to the touch.
  • Do not apply directly to your skin. Ever.
  • Let treated clothing dry completely (12+ hours) before wearing

This approach is so effective, I now treat my summer hiking clothes at the start of each bug season and often re-apply half way through. I don’t live or activate in an area known for heavy tick and mosquito populations, so I can usually get away with only two treatments per year. The most important one is when ticks are most active in the spring.

There are other brands of Permethrin sprays out there as well. I typically buy my bottles via Amazon or at REI (where it’s often in stock). If you live outside the US, any camping gear or hunting store will have Permethrin.

If I’m Stationary

You might’ve noticed in some of my evening or camping activation videos that I’m running a little device nearby. It’s a Thermacell Mosquito Backpacker Repeller—and I love it.

It screws onto a standard fuel canister and creates a small mosquito-free zone. I’ve used it with great success in some of Canada’s buggiest backwoods and on the coast of North and South Carolina in the evenings when mosquitoes come out in full force. One fuel canister lasts a very long time, and I often use it with the family when camping or picnicking. Highly recommended.

Note that you’ll want to keep a stash of Thermacell refills.

Since Thermacell refills aren’t cheap, I tend to stick with other repellents if I’m only performing a short activation or, especially, in an area where the mosquito population isn’t heavy. I do use the Thermacell when I plan to do a POTA rove (thus I can use the same Thermacell pad at multiple sites) or if I plan to stay at a site for one hour or longer.

Note: If You Get a Tick

Ticks happen, even with precautions. I keep a tick puller (or Tick Key) in my wallet during tick season. They’re inexpensive, lightweight, and super effective.

If you’re bitten by a deer tick in an area where Lyme disease is prevalent, consult your doctor as soon as you can.

Often, a short course of cheap antibiotics—often just two doses—can prevent infection if started early.

Final Thoughts

I feel that staying safe from ticks and mosquitoes is part of being a responsible and prepared field operator. Protecting yourself helps ensure your activations are fun, not frustrating.

Do you operate in bug-prone regions? I’d love to hear what’s worked for you—whether it’s a product, method, or even an old-school trick passed down from a camping buddy. Let’s keep the bites to a minimum and the contacts coming in!

—Thomas (K4SWL)

Articles, News, People, POTA, Travel

Three Generations of CW Ops: Battleship North Carolina Activation and a Family Legacy

12 Comments

by Micah (N4MJL)

It’s not every day that I get the chance to do a POTA activation from the radio room of a battleship. But thanks to the Azalea Coast Amateur Radio Club, I was able to do a POTA activation of US-6831 from the radio room of (BB-55) USS North Carolina in Wilmington, NC.

If you would like the chance to be a guest radio operator for the BB-55, check out http://ac4rc.org to set up your activation.

The below-deck self-guided tour takes you through Radio Central. The radio room that the radio club utilizes can be seen from Radio Central; however, it is separated from public access by a clear plexiglass bulkhead door. Because the public can watch from the other side of the glass, be aware that it can be very noisy.

To make things more distracting, there is a loudspeaker in the radio room central playing pre-recorded Morse code for ambiance.

Radio Central is located a couple of floors down in the belly of the iron-armored beast, so be sure to schedule your activation on the POTA page. There is no cell phone reception below decks.

The radio club has an IC-756 Pro III available for use. I am not sure about the status of the other WWII vintage radios. I definitely recommend you bring your own key! They had a Bencher paddle thrown in the filing cabinet; it was not usable due to the contacts being bent way out of position. Fortunately, I brought my BaMakey TP-III key with me. If you are using a 3.5mm stereo plug, make sure to bring a 1/4” plug adapter for use with the IC-756 key/headset jacks.

The radio club has the IC-756 and external tuner hooked up to one of the battleship’s original long wire antennas. During the activation, I only operated on 20M. I did attempt to tune 17m and 15m, but I was unsuccessful in getting a match. However, that may have been operator error on my end since I was unfamiliar with the radio and that particular external tuner.

After a minute or so of calling CQ, the Reverse Beacon Network did its magic, and I was blown away by an insane pileup. I realized that I am used to operating QRP with somewhat compromised antennas. In sheer panic, I started looking to see how to turn the power down from 100 watts to, say, 2 watts!!!!

In that moment, I saw a vision of a seasoned Navy Radio OP sitting beside me. He reached over and smacked me on the back of my head and said, “Listen, kid, you’re not some hippie tree hugger operating QRP on some windswept mountaintop. You are operating from the battleship USS North Carolina. She has participated in every major naval offensive in the Pacific area of operation during WWII. Now stand tall, run full power, and work ’em all!”

With that old-school counseling session complete, I began to work the pileup. After being on the air for one hour and fifty-three minutes, I worked 67 stations, with two duplicates and one busted call sign (that I know about). Eventually, no one responded back to my CQ, and I sent “Last call fer POTA de N4MJL” twice. After no one responded to my second message, I quickly sent QRT and started breathing again!!!!!!

In addition to working SA4BLM from Sweden, one of the coolest contacts I got that day was from my dad, AC0UT, located in Missouri.

It’s not every ham that can say that their dad called them using CW while on a battleship.

CW actually runs in my family. I am a third-generation CW op. Continue reading Three Generations of CW Ops: Battleship North Carolina Activation and a Family Legacy →

Articles, Field Reports, Guest Posts, Mobile, News, Portable, POTA, QRP, SOTA, Travel

From the Badlands to Mesa Verde: QRP Across America’s National Parks

18 Comments

Activating on the Road:  National Parks

by Brian (K3ES)

This article continues my series from our 2024 road trip across the United States (Six Weeks and 7300 Miles:  Activating on the Road).  I hope to wrap up the series with one last article soon.  In this report, I will cover the six National Parks (NPs) that we visited during our trip.  I activated five of them for the Parks on the Air (POTA) program using CW mode at 5 watts.  A previous report on Stealth Activating with the KX1 Antenna System provided activation details for three of the parks (Badlands NP, Yellowstone NP, and Grand Canyon NP), so I will not reproduce activation details here, but I will include more of Becky’s pictures.

Each of these NPs is spectacular in its own right, and also distinctly different from each of the others.  We were able to see some of the sights, but by no means had enough time to do them justice.  In fact, as we completed our drive through Yellowstone NP, Becky and I committed ourselves to going back again and spending much more time to see its wonders.

As I reflect on our visits to NPs on our trip, it occurs to me how beneficial it was to buy an Annual America the Beautiful National Parks and Federal Recreational Lands Pass before we left on our trip.

The pass costs $80 for a year, and generally covers the admission of one vehicle and its occupants.  We were able to save on admission costs several times over, making this one of the best NP values going.  Having now completed 62 trips around the sun, when we next visit NPs, I am eligible for an even better value, the $80 Senior Lifetime America the Beautiful Pass.

Badlands NP

The first NP we visited on our trip was Badlands NP in South Dakota.  We spent a couple of nights and days based nearby in the town of Wall, so we were able to take two drives through the park.  There is a stark transition from rolling plateau north of the park to the spectacular peaks and canyons of the badlands.  Rapid erosion has been shaping the terrain for about 500,000 years with the Cheyenne and White Rivers cutting their way through the terrain.  The resulting landscape is both beautiful and severe.

While visiting the park, we were privileged to see a variety of wildlife.  We saw a number of bison, ranging from small herds grazing in fields along the road, to an individualist who took a liking to the taste of grass beside one of the overlook parking areas.  There were also bighorn sheep and pronghorn antelope wandering other parts of the park.  There was abundant bird life, from a disoriented prairie chicken that accepted water from concerned visitors, to birds of prey soaring high above.  Becky particularly enjoyed the frenetic activity of the residents of Roberts Prairie Dog Town.

This bison had no problem napping in the middle of the Prairie Dog Town
This prairie chicken appreciated shade and water in the parking lot

During our visit, we stopped at an overlook parking area for Becky to take pictures of the spectacular scenery, including the aforementioned bison.  While she was doing this, I took the opportunity to do a stealth activation of the park, which is documented in an earlier Field Report here on QRPer.com, linked as K3ES:  Stealth activating with the AX1 Antenna System.

I managed to catch the photographer in action during a lull in my activation
Of course, Becky caught me in action, too

Yellowstone NP

We knew when planning our trip, that we would not have time for a proper visit to Yellowstone NP.  In fact, we intended to hold off on visiting until we had time for a dedicated trip.  But throughout our drive, Becky kept searching the available maps for opportunities and possibilities.  As we traveled through Montana, she noticed that we could fit in an abbreviated trip through Yellowstone and Grand Teton NPs if we adjusted our route.  Consequently, we found ourselves spending the next night in Gardiner, MT, just outside the north entrance to the park. Continue reading From the Badlands to Mesa Verde: QRP Across America’s National Parks →

Articles, News, QRP, QRP Radios

Are we spoiled for choice? Why There’s No Better Time to Be a QRP Field Operator!

41 Comments

Last year, at the Tokyo Ham Fair, Yaesu unveiled the long-awaited FTX-1F portable HF transceiver. After years of speculation, we finally have a successor to Yaesu’s venerable FT-817/818 product line on the horizon—a radio series with an impressive run of over two decades.

The Yaesu FTX-1F (Source: Yeasu)

I’ve enjoyed reading the flurry of comments that continue today from readers following the FTX-1F announcement many months ago. The reactions are all over the map, but overall, it seems the FTX-1F checks a lot of boxes for amateur radio field operators.

This got me thinking…

From Sparse to Abundant

When I was first licensed in 1997, options for compact, portable QRP transceivers were few and far between. Sure, there were some kit radios and a handful of basic analog options, but almost no general-coverage QRP field radios. The only one that came close (besides the Argonaut II, which wasn’t exactly backpack-friendly) was the Index Labs QRP Plus.

Don’t get me wrong—there were some classic QRP radios out there, but they weren’t exactly compact. Tossing one into a daypack for an afternoon hike? Not likely.

Fast forward to today, and it’s a completely different story. The market is overflowing with QRP radios, offering something for every type of operator.

A radio for every preference and budget

  • Sub-$400 radios? You’ve got options like the QRP Labs QMX, CFT1, (tr)uSDX, Xiegu G-106, and Venus SW-3B/6B.
  • Affordable kits? Check out the QRP Labs QCX/QMX series, the CFT1, and (until recently) the Penntek transceivers.
  • Ultra-compact CW transceivers? Look no further than the Elecraft KH1, Mountain Topper MTR series, and QRP Labs radios.
  • Shack-in-a-box radios with built-in ATUs, mics, and batteries? Consider the Elecraft KX2, Xiegu X5105, X6100, and X6200.
  • High-performance QRP rigs? There’s the Elecraft KX3 and Icom IC-705.
  • Spectrum displays and built-in sound cards? The Icom IC-705, Xiegu X6100/X6200, and likely the upcoming Yaesu FTX-1F (fingers crossed) have you covered.

And that’s just scratching the surface. The past decade has brought an explosion of innovation in the field-portable space, making it hard to keep up.

I couldn’t have imagined a radio like the KX2 back in 1997! Nineteen years later, it was a reality.

Even better, prices have become more competitive. Adjusted for inflation, we’re getting more radio for our money than ever before. Sure, some options are pricey, but compared to 1997, we’re living in a golden age of QRP.

A personal perspective on radio prices

Case in point: my first HF transceiver was a used Icom IC-735, which I bought for around $700.

Original IC-735 sales flyer

At the time, that felt like a solid deal for a full-featured HF radio that originally retailed for $1,150. Adjusted for inflation, that $700 would be about $1,371.83 today.

For perspective, one of the priciest QRP radios on the market right now is the Icom IC-705, which retails for $1,349.95 at time of posting. That’s $21.88 less than I paid for my used IC-735 inflation-adjusted.

On the flip side, if you adjust the cost of a brand-new, assembled QRP Labs QMX (roughly $200) to 1997 dollars, it would have been about $102.

Better still, if you’re willing to build the QMX from a kit, you can snag it today for roughly $102 in 2025 money.

Had the QMX existed in 1997? The kit price would have been $52.19 inflation-adjusted!

Sure, inflation-adjusting isn’t a perfect science—it doesn’t account for many other economic factors like manufacturing advances, material costs, or exchange rates—but it’s still a fascinating metric to use for perspective.

Talk about a bargain!

It’s a brilliant time to be a QRPer!

Working DX with a handheld radio and a 4-foot whip antenna? We live in amazing times, indeed!

So, while it might sometimes feel like “the perfect radio” doesn’t exist or that prices are sky-high, I believe we’re actually living in the best time to be QRP operators. The options are plentiful, the innovations are remarkable, and the value for money has never been better.

What do you think?

Articles, News, POTA, PSK, QRP, SOTA

2025 Plans: Less About Goals, More About the Journey

4 Comments

Last week, we recorded an episode of the Ham Radio Workbench podcast. Our main topic was Winter Field Day, but we also discussed our plans for 2025—not just workbench projects but our overall goals and what’s on the calendar.

Lately, I’ve been so focused on the present and immediate future (sorting out post-storm property repairs, etc.) that I hadn’t really taken the time to think about our bigger plans.

I may tweak this list over time, but here’s what’s on my mind so far:

Projects:

  • A proper, thorough shack purge: I really need to cut a lot of the detritus out of my QTH radio space.
  • Attend at least four hamfests with N3CZ as vendors to help accomplish the first point!
  • Use PSK-31 and other digital modes more frequently.
  • Finally build that QCX+!
  • Develop our Swannanoa Valley GMRS network and grow the user base through public information sessions.
  • Spend more time QRPp and experiment with antenna choices: I do love playing radio with one watt or less!

Where I plan to go:

  • The Charlotte Hamfest 
  • RARSfest (timing for this one is always tricky for me, but I’ll do my best!)
  • Four Days in May
  • Hamvention 2025 (I’ll be at the Ham Radio Workbench table with the crew)
  • A multi-week family trip this summer (possibly a road trip or something further afield by air—it all depends on my daughters’ summer studies schedule).
  • WCARS Hamfest (if we’re in the country)
  • The W4 SOTA Fall Campout

I’d love to attend Ozarkcon, but that weekend is a tough one—perhaps if I skip RARSfest, I could make it. I’d also love to attend the Huntsville Hamfest, but I suspect it’ll conflict with university move-in dates for my daughters.

A true bucket list item is Messe Friedrichshafen, but unfortunately, the date this year conflicts with another commitment.

What I’m looking forward to:

  • Checking out the new Yaesu FTX-1F (I paid to reserve one with DX Engineering)
  • Ham Radio Workbenches On The Air (coming in March—details will be announced soon on the HRWB website).
  • Getting back into SOTA (Hurricane Helene really set me back here)
  • Taking my vintage Swiss Army Rucksack to the field!
  • More camping! Depending on the car we choose to replace the Subaru Forester, I may or may not get to use my awesome C6 rooftop tent

I may add more to this list, but you might notice there are no numerical goals—for example, specific targets for POTA or SOTA activations. This year, we’re still focusing on getting back on our feet. Maybe next year, I’ll set goals in that regard.

You might also notice that I don’t have any active goal of growing my YouTube channel’s subscriber base. Indeed, I never have. Honestly, my philosophy has always been that people who enjoy my channel will find it organically. What makes my channel so fun for me is not worrying about subscriber numbers, channel metrics, or stats.

Following the YouTube algorithm often leads to stress, clickbait, and compromising one’s vision. It also creates a certain sameness among channels, which I’m just not interested in. I love the community around my channel and am happy to let it grow naturally.

Thank you for making this QRPer community such an amazing one!

How About You?

I’d love to hear what your plans and projects are for this year. Please comment below!

Articles, Guest Posts, News, POTA, Travel

Bryce and Joe’s Triple-State POTA Activation

3 Comments

A Triple-State POTA activation!

by Bryce Bookwalter (KD9YEY) and Joe Ladwig (W9NVY)

It’s finally winter here in Southern Indiana, which, for many, brings a time of cozy indoor activities and quiet radio time in the comfort of a warm shack. For Joe and me, however, this means it’s winter POTA time!

I have always preferred hiking in the winter—there are fewer bugs, less humidity, and typically much better views since the leaves aren’t in the way. It makes sense that my passion for outdoor radio also increases in the colder months. With work and school (Joe is a teacher) slowing down for the year, we decided it would be a good time to fit in another POTA trip.

Over the last two years, we have been checking states off our “activated” list, and lately, we have had to travel farther and farther away to find a state we haven’t activated. Joe had the lofty goal of traveling to the Minnesota (MN), North Dakota (ND), South Dakota (SD) tri-corner and catching Iowa (IA) on the way, but once we looked at the total travel time (27 hours!), we decided there might be other opportunities that are closer and less prone to winter mayhem.

We have set our sights on the corner of Maryland, West Virginia, and Pennsylvania. One of the perks of being in “the crossroads of America” is that there are many places within a day’s drive. This intersection of three states is no exception. With a mere 6.5-hour drive, we will be able to activate three states in one day. We plan to overnight in Wheeling, WV, and then start our triple-state POTA adventure the next day.

Our first destination is US-0704 Fort Necessity National Battlefield in PA. With 68 activations already on record here, it seems like it will be a great place to activate. I have always enjoyed history, so this site is one that I am particularly excited to see. Activating at National Parks can have its challenges, so we will be sure to plan our equipment accordingly.

Our journey continues into Maryland, where we will try to activate at US-6400 Youghiogheny Wild River State Natural Area. This area is part of the Mississippi watershed that stretches from the western slope of the Appalachian Mountains in the east to the Rockies in the west. Based on the topography I see on the map, this spot has the potential for some beautiful views. This site has 46 reported activations, with 45 of them being successful, so we anticipate victory!

Our final state to activate this day will have us traveling back into West Virginia. We will stay another night in Wheeling before heading home the next day, and US-5585 Coopers Rock State Forest is conveniently on the way. Coopers Rock is another site with some amazing topography, at least according to the map, and I am very excited to see it! According to the website, “Coopers Rock State Forest boasts some of the most iconic views in Almost Heaven.” I’ve been to West Virginia several times, and the views never disappoint.

With our destinations selected, the next step is to pick the proper gear. With a trip of this scale, and this far from our ham shacks, it’s important to plan carefully. I always like to have backups when I go to activate, but in this case, I think having a few extra will be a good idea. Since this is a trip for POTA, we really have the entire vehicle to pack gear into, so why not bring all the toys?! Another important consideration is the parks we have chosen. One of them is a historic battlefield and a National Park… I can’t imagine throwing heavy lines into trees and hoisting antennas into the air will be tolerated, so having an antenna system that doesn’t require that will be an important consideration.

With these factors in mind, we have selected the following gear:

Radios

    • Yaesu FT-891 w/ tuner: This workhorse always delivers exceptional performance and I’m not saying anything new to speak of its POTA capabilities. Due to its size (especially with tuner) and weight, this isn’t a first choice for me as a backpacking radio. But with a car to carry it, and not having to carry a full camping loadout along with it, this radio is a go-to for our POTA escapades.
    • Xiegu G90: If you’ve watched any of my YouTube videos you know that this is my typical POTA rig. It relatively lightweight, has an internal tuner, and isn’t a huge battery draw with it’s 20W max output. I typically run it at 10W to give myself the QRP challenge and it consistently performs very well.
    • QRP Labs QMX: This little beauty is my backpacking radio of choice. It is incredibly lightweight and versatile. Currently, as far as I am aware, it still only runs CW and Digital modes. Eventually it will have the capability to run SSB and I am very excited for when that day comes. Until then, I use it for FT8 in the field and it does a great job. I am still learning CW so I haven’t used it to make contacts that way yet, but I will soon!
    • Yaesu FT-60: This is my HT of choice, which I always like to have with me when I travel. Before I leave, I will have the local repeaters programmed into it and it will be fun to try and reach a 2m/70cm contact via simplex while at the parks as well.
    • Yaesu VX-6: This is Joe’s HT of choice and another great radio from Yaesu. With it we can also try and get a 1.25m simplex contact…if band operators are out there.

Antennas

 

    • PackTenna!: The first thing going into my kit is the PackTenna! This antenna has proven itself to be incredibly capable and super easy to use. I have the 40m extension that goes with it as well and between its performance and the weight…it has quickly become my favorite antenna.
    • SOTABeams Bandhopper 3: This antenna is a 20m, 30m, and 40m dipole and works wonderfully, especially when paired with the Tactical Mast from SOTABeams. The only drawback to using this antenna is that to change bands, you must lower the antenna to the ground and connect or disconnect the alligator clips along the wire. Other than that, this antenna does great work.
    • K9EI Antennas: Joe and I both use K9EI antennas and they work great. Not only is K9EI a local in our area but he also makes great products. The 20m EFHW is always in my kit as a reliable backup and has saved my activation on numerous occasions. Joe has a 40mEFHW that is incredibly useful and has a unique design. With its rugged construction and versatility, it is Joe’s antenna of choice for POTA.
    • Wolf River Coil SOTA Special: Yes, yes, yes…another antenna. This vertical antenna has been fun to experiment with. It’s the only vertical I own, or have used for that matter, and it’s done the job each time. I used it for my first ever SOTA, which you can see on my YouTube channel. These types of antennas are great to have along with you when you are unsure of the area you are trying to activate in. If there aren’t trees, or if you aren’t allowed to utilize trees, or put stakes in the ground for guy lines, these verticals are a low-impact solution that will usually get the job done. I picked this one up at Hamvention 2024 and it’s been a great addition to the fleet.

Masts

Masts are a great solution for wires-in-the-air without having lines in trees. I have two masts and will be bringing both.

      • The SOTABeams Tactical 7000H has been a great addition to my kit and has served me well for a couple years now. It is a bit on the heavy side, but it stands tall and strong in many configurations and has accomplished every task I’ve asked of it.
      • The POTA20 is my newest addition which I picked up at the Huntsville Hamfest. This lightweight mast is my backpacking mast of choice. It is super bendy and can have trouble holding up a ton of weight, but it remains incredibly useful and one I carry on all my POTA trips.

Other Gear

Since we have the luxury of a vehicle, and not everything having to go into a backpack, we can bring along all the comfort items.

      • Table
      • Chairs
      • Laptop (though I still like to log with pen and paper)
      • Camera gear (for filming YouTube videos)
      • Bag of connectors, adapters, fuses, wire, alligator clips, tools, etc. (Very Important)

Needless to say, we are both looking forward to this trip very much. The parks mentioned above are the parks we will for sure be going to, but there are also other parks in the area and if time allows, we will try and add more to our list.

You can also see a video of our adventure at @backpackingbooky on YouTube. You can also search for Bryce Bookwalter / KD9YEY on YouTube to find the channel.

Thanks for reading and thank you to Thomas for sharing his platform and I’ll see you down trail!

Antennas, Articles, Field Reports, News, Portable, POTA, QRP, Travel

K3ES: Stealth Activating with the AX1 Antenna System

18 Comments

Activating on the Road:  Stealth Activating with the AX1 Antenna System

by Brian (K3ES)

The AX1 Antenna is on the air from the Profile View parking area at Mount Rushmore National Monument.

As I prepared my radio gear to do Parks on the Air (POTA) activations across the states of the American West (Six Weeks and 7300 Miles:  Activating on the Road), I knew that I would need to operate in a wide variety of different park environments.  This need was primarily connected with differences in topography, vegetation, population, and regulatory environments.

A selection of wire antennas, a throw line kit, and some collapsible mast options would serve many of my needs well.  However, I also expected that our travel schedule might require me to activate quickly or unobtrusively, from less-optimal locations.  Since I do not have an HF rig or antenna system installed in my truck, any vehicle-based operations would need to use equipment from my portable POTA kit.

For these occasions, I intended to use either a wire antenna supported by a telescoping mast attached to back of the truck, or my diminutive Elecraft AX1 base-loaded vertical antenna system.  During the trip, I found that I could use the AX1 to complete rapid, and extremely stealthy, activations.

My AX1 kit is kept in a Maxpedition Fatty pouch.
AX1 components are organized inside the pouch, and counterpoise wires are located in a hidden zippered pocket.

I had ordered the AX1 antenna system from Elecraft early in 2024, and took delivery in March.  I used it in a variety of configurations, gaining experience and confidence in its ability to make contacts (K3ES Travels: Ten Days of QRP with Compromised Antennas).

In early May, I also ordered an AM1-2 clamp-on antenna mount from ProAudio Engineering, and it had proved its versatility in deploying the AX1.  All of this equipment and more found its way into a Maxpedition Fatty pouch, to become part of the stealth antenna kit packed for our trip across the country.

I Wonder if this Will Work…

A view from the truck…  The AX1 antenna mounted on the fender, is seen with a great landscape from Badlands National Park.

Badlands National Park (US-0005) was one of the most spectacular parks that we visited on our cross-country adventure.  I plan a future report with full coverage of the park and the activation, but the conditions in the park led me to make my first attempt at a truck-based activation.  Shade was almost non-existent, the sky was cloudless, the air temperature was over 90°F, and the ground was too hot for POTA Dog Molly’s paws.

We pulled into a parking space at a roadside overlook, so that Becky could take some pictures, and I decided to try for a quick activation from the truck.  After I set out a bowl of water in the back of the truck for Molly to drink, I pulled out my radio gear, and looked over my antenna options.  I could have put up a mast and used a wire antenna, but I did not want to block access for other visitors, so my thoughts turned to the AX1 system.

The small size of the parking lot made it important to keep my operating footprint within the confines of my own parking space, both to avoid inconveniencing others, and to minimize the risk of damage to my antenna components.  I decided to try attaching the AM1-2 clamp to the cylindrical base of my 2m/70cm mobile antenna, which is mounted on the front fender of the truck.  The AM1-2 clamped on securely, and provided firm support for the the AX1 coil and whip.  I also attached a counterpoise wire to the ground screw of the AM1-2, then tossed the wire under the truck to keep it on the ground, hidden, and out of the way.

That left two questions:  could I get the antenna to tune, and would it radiate well enough to get contacts?  I connected my feedline to the AX1, ran it in through the open driver’s window to the KX2, and quickly got answers to both questions:  yes and yes. Continue reading K3ES: Stealth Activating with the AX1 Antenna System →

Articles, Field Reports, Mobile, Morse Code, POTA, Travel

Sometimes you need a little cryptaesthesia

5 Comments

As always, there are lots of links within the article. Click one! Click them all! Learn all the things!

by Vince (VE6LK)

It’s time for another return trip to the correctional institution that I spoke about in my last post. And that means only one important detail: more time to POTA en route. This trip will carry me, via a ‘short’ 325km detour from the direct route, into Castle Provincial Park and Castle Wilderness Provincial Park, with a stop or two along the way.

The Research and planning

Castle Provincial Park CA-2971 is within the larger Waterton Biosphere Reserve CA-0109, so any activation I can do is automatically a 2fer. Looking more closely at the map, I see Castle Falls CA-2969 is within Castle PP, and that makes it a 3fer. I printed off the park info sheets from POTA.app, studied some satellite imagery, printed some, and bundled it all together. I have been in this area once before, camping in August (and the bugs were awful, yuck!), so at least I knew three things…where I was going, an expectation of cell service (not great off the main roads) and bugs would be minimal to non-existent, given it’s mid-November.

In thinking about a route that needs to get me closer to my hotel and one that increases the number of unique parks I’ve activated, I decided upon Beauvais Lake Provincial Park CA-0632, another 2fer with CA-0109. A satellite view shows easy-peasy road access, and even if the main gates are closed, I’m still on the property, so it will be a valid attempt/activation.

But I also really want to get to the Castle Wildland Provincial Park CA-2972, as it’s never been activated before. And while there is road access through the entire Castle area, I opt to take paved roads as winter driving and gravel (and no cell service) can be unpredictable at best. I’ve also never been to Castle Wildland, but in my mind, I’m imagining views reminiscent of Waterton Lakes or Glacier National Park, given the very close proximity. As it turned out, I wasn’t too far wrong.

I also tacked on one park at the last minute and was happy I did so, even if I could not activate it.

Continue reading Sometimes you need a little cryptaesthesia →