Pairing the Xiegu X6100 with the Elecraft AX1 antenna…will it work?

If you’ve been reading QRPer for long, you’ll note that I’ve become quite a fan of the uber-compact Elecraft AX1 antenna.

Not only has the AX1 never let me down, but it can even outperform my other antennas in terms of snagging contacts during an activation. Yes, it can even work some DX as well.

Normally, I pair the AX1 antenna with my Elecraft KX2 (above) or KX3 (below).

I’ve even paired the AX1 directly to my Icom IC-705 using a homebrew simple capacity hat (thanks again for that idea LY2H!)

The AX1 needs a little help from an antenna tuner (ATU) to get a match across the 40, 20, and 17 meter bands. Of course, I could always mount the AX1 on a tripod and attach an in-line ATU, but I love the simplicity and speed of setup when paired directly to a transceiver that sports an internal ATU.  To be clear, the Icom IC-705 has no internal ATU, but I was able to get away with using a capacity hat to match impedance on 20 meters.

The new Xiegu X6100 (above) has an internal ATU–a good one at that! As soon as I took delivery of this loaner unit from Radioddity, I plotted hooking it up to my AX1 to see how it might shake out in the field!

The X6100 lacks only one thing that the KX2, KX3, and IC-705 have: a good, accessible grounding point on the chassis.  The AX1 needs a counterpoise to operate efficiently.

That’s really not a problem, though–easy fix. I recently stopped by an auto parts store and picked up an assortment of clamps. I found the two that best fit the shield of the AX1’s BNC connector. I then made a short cable with those clamps which allows me to clamp to the BNC shield to my AX1 counterpoise wires. A simple and very cheap solution!

With all of the parts in place, on Tuesday, January 4, 2022, I made my way to the Blue Ridge parkway to attempt an activation with this X6100 AX1 combo!

Blue Ridge Parkway (K-3378)

Since much of the Blue Ridge Parkway is shut down this time of year, I’ve been going to the Folk Art Center for quick POTA activations.

It’s starting to feel a bit like my outdoor home office!

Gear:

Set Up

Once I arrived on site, I realized there was more snow on the ground (or, more importantly, on the picnic tables) than I would have guessed.

I didn’t bring my portable shovel to scrape off the frozen clumps of snow, so I just worked around it on the table and bench.

First, I deployed both my 40 meter and 20 meter AX1 counterpoises. Next, I set the X6100 in a snow free spot on the table, and then started my activation video (see below).

Attaching the AX1 to the X6100 was very easy. The only issue–one that will be easy to fix for future activations–is the BNC on the X6100 sits higher than those on the KX2 and KX3. This meant that the AX1 Bipod legs were positioned much closer together to touch the table surface and provide stability. This made the center of gravity more narrow over the support base the Bipod legs provided.

In future activations with the X6100/AX1, I can attach extensions to make the legs a bit longer and the base wider.

Since it wasn’t a windy day, I was able to make it work as-is. Although I worried the AX1 my topple, it never did.

On The Air

I pressed the ATU button and the X6100 quickly and quietly found a match on 7063 kHz.

Almost immediately after I started calling CQ, the sun started warming up the snow in the tree branches above and little drips of water started falling.

Just perfect!  Ha ha!

Actually, I have both a mylar “space blanket” and emergency sleeping bag in my SOTA pack, so I simply pulled out the sleeping bag and used it to protect most of the front of the radio.

Not pretty, but effective. This is a screen grab from my activation video.

Throughout the activation, water dripped on me, but I managed to protect the X6100 which was the important bit (especially since it wasn’t actually my radio!).

I didn’t call CQ for long before I started logging stations.

On 40 meters, I logged 8 contacts in 9 minutes.

I then moved up to the 20 meter band where I worked an additional 11 contacts in 10 minutes.

Normally, I would have stoped there, but I wanted to see if the X6100 could load the AX1 antenna on 17 meters as well. I switched the AX1 to 17 meters, pressed the ATU button and got a quick match.

I wasn’t sure if it was even realistic to expect a 17M contact, so I was very pleased when I heard Dennis (KI5LKS) calling from Texas and put him in the logs!

QSO Map

Here’s what the X6100 and AX1 combo can do with 5 watts on a Tuesday morning:

Activation video

Here’s my real-time, real-life, no-edit activation video. As always, there are no pop-up ads to interrupt your slumber as my video plays in the background: 🙂

Click here to view on YouTube.

An effective combo!

Overall, I was very pleased with the X6100 and AX1 pairing.

The only improvement I need to make is to add some extensions on the AX1 Bipod legs to increase the base of support. That should be quite easy, in fact.

I’m very pleased the X6100 could so easily match the AX1. I’m *almost* tempted to buy a second AX1 to keep in my future X6100 field kit (did I mention I purchased an X6100? I think so.).

But two AX1 antennas for one radio op?  That’s crazy talk.

Or is it?

(See how I easily I talk myself into these things? Someone send for help!)

Thank you!

Thanks so much for joining me on this short activation.

I’d like to send a special thanks to those of you who have been supporting the site and channel through Patreon and the Coffee Fund. While certainly not a requirement as my content will always be free, I really appreciate the support. I’m honored and most grateful!

I hope you have an opportunity to play radio in the near future.

Thanks again!

72,

Thomas (K4SWL)

16 thoughts on “Pairing the Xiegu X6100 with the Elecraft AX1 antenna…will it work?”

  1. Very nice. I’m looking forward to using my AX1 with my KX2, whenever it comes, hopefully in early February.
    Thanks for the suggestion for the ground wire.
    73
    Wb8yxf

  2. The AX1 remains one of my favourite “pop up” antennas and performs as well as my SuperAntenna MP1 (although I’ve not tried them back to back). I pondered over the investment as they are not cheap over here in the UK, but it has been money well spent! Almost makes it worth considering an AX2…..

    Richard M0RGM

  3. Thomas, how about buying an AX2 for your second uber-portable antenna?! And then you can do an activation and post comparing the two!

    I purchased the AX2 (plus the 40m extension that is common to both) because it’s a bit small and was a bit cheaper. I’ve had no issues in my very limited experience with the AX2 so far – was able to hear South Africa from my NC back yard on 20m (but couldn’t break the pileup w/5w SBB!), and 4 POTA contacts in WI, TX & AR on 20m running 10w SSB with an Icom 705 using an inline LDG 100+ tuner.
    73,
    Bill – W4LTC

  4. Great Video!! I had not realized how similar the 6100 is to the 705 with the power on switch, knobs, etc all being in the same place. Audio sounded great on the video and as clear as my 705. I’m not sure what speed you are sending CW but I almost 100% copy the stations and it is giving me good CW copy practice. Saw you log my QSO as KG4Z instead of WG4Z as I was in a Park (K-2753) also. Might want to correct your Paper Log. I’m still debating on getting an AX1 to go with my 705 and KX3. The MPAS Lite with UCM or Spike is still my pretty much my quick set up antenna with the 50’ coax as the counterpoise. 5 minutes at the most for the antenna setup.

    72 Max – WG4Z

    1. Golly, Max! Sometimes my hand doesn’t copy what I know and hear!

      I’ll check on this when back home and correct the logs.

  5. AX1 w/6100 Tip:

    Lay the X6100 flat. Easy to see the screen and plenty of stability for the antenna!

  6. Thomas, thank you for another informative review. My go to antenna will be my Wolf River Coil silver bullet T1000 TIA, but I would like to get something a bit more portable that sets up quickly for that quick run to the park and perform a few qsos with my X6100. Can you recommend a list including the AX1 and accessories I would need?

  7. I just picked up a x6100, and just made the K6ARK antenna in the random wire configuration, haven’t had a chance to take it out yet but will soon. I’m looking at getting an ax1 to put in the kit for quick use when the random wire isn’t convenient to use, your video and post here certainly made me more curious and motivated. Thanks for sharing your experience and I always your unedited approach to videos. Cheers and 73, K1AMT

  8. I found some bipod legs for the x6100 on Thingiverse that supposedly replaces the stock legs and gives a more stable antenna. Waiting for the screw and clip from Elecraft to try them out.

    The AX-2 on a tripod has been pleasantly surprising. It will be nice to try it where a small footprint is necessary, such as urban POTA locations (Historical site, etc).

    1. Excellent. I was just looking at the AX2 on the Elecraft site yesterday. I think it might be time to bite the bullet!

      And, yes, it’s great having the AX2 as an option at sites that aren’t ideal for a full antenna deployment.

Leave a Reply to Jim Langley Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.