Tag Archives: Sotamat

2,112 miles as AI7LK in the US Pacific Northwest

by Vince (VE6LK/AI7LK)

As always there are links within the article. Click one! Click them all! Learn all the things! 

In December of 2023, I found myself with a surplus of vacation from my employers, and my Brother who’s move-in date to his new home got suddenly moved forward to just before Christmas. I was able to get time off work and make an epic road trip with POTA stops along the way to both allow me to have some radio fun and to give my body a stretching break. My trip would take me from my home in Alberta, westward through British Columbia, southward into Idaho, Washington, Oregon and I even made it as far as Northern California to see the Pacific before turning around and heading back home.

Along the way, I activated at 14 stops which totaled 21 parks in all after factoring in the 2-fer, 4-fer and 5-fer stops! This was a total of 301 actual QSOs netting 508 after the x-fers were computed in. It was a mix of CW and voice with an average of 21 contacts per stop.

There were many highlights of the trip, and naturally spending time with my brother and his wife were at the top of the list–despite the work of moving into a house–followed by the simply spectacular scenery along the route and the route planning itself. While this trip was decided upon on a Thursday evening and I was on the road the following Monday, I still found about 10 hours to research points of interest along my routes and look for POTA entities that had either not been activated yet or were CW ATNO, having only had a Phone or Digital activation previously. For the most part, these were the stops I targeted as my waypoints.

The Columbia River is nearly a mile wide at Rooster Rock SP

Driving along the Columbia River Gorge on I-84 approaching Rooster Rock State Park felt like driving along the base of the Grand Canyon, given the 1000′ height of the cliffs beside me. Rooster Rock State Park (K-2850), is notable for two reasons. 1 – it’s a 5-fer activation point – my first 5-fer stop ever doing POTA, and 2 – it’s windy as heck as you can see in this short video I took for Charlie W7RTA who told me, via Discord, it would blow [what’s left of my hair] off my head.

Click here for 7 seconds of the Columbia River Gorge wind whipping the hair off my head!

Certainly Rooster Rock was a highlight given it’s the only 5-fer activation I’ve ever done. It was activated two hours after a 4-fer at Willow Creek State Fish and Wildlife Area (K-10646). I only learned about the multiples after chatting with folks on the POTA Discord server.

It was a short drive from Rooster Rock SP to the home of KJ6VU in Oregon City, Oregon. While I’ve worked with George on the Ham Radio Workbench Podcast for nearly three years, I’d never met him in person until this trip. It was such a treat to spend time with him.  George is the creator of the Packtenna that so many of us love to use. As luck would have it, the KJ6VU repeater was due for a replacement and scheduled for the next morning, and I was able to put my skills in racking (installing) repeaters to good use. After we finished the repeater I departed and did some performance testing while southbound on I-5 to test its range.

The repeater crew. L to R: Josh K6OSH, Nick KF7SOM, the Author, and George KJ6VU

Along the way I got to have a coffee break with Nick Smith NT3S who I had met via Discord. Nick can be found activating parks and going overlanding on weekends. Thanks Nick for the time to have a break with you!

Over the next several days I spent time in Grants Pass Oregon assisting my brother and his wife to get moved in. Grants Pass even has a Harbor Freight Tools and I was able to get some shopping done! So as it turns out I wouldn’t be slugging boxes every day and there was a bit of a break during my visit to go out and play radio. I know the POTA program is especially popular in the United States and I’d heard that every entity has been activated at least once, which is very different from here in Canada where many parks are untouched. In my research and thanks to the parks added in the autumn of 2023, there are some in the system that had never been activated. On one Saturday afternoon I was able to visit one of these parks -Cathedral Hills Trail System- and work 72 contacts in under an hour on SSB.

Cathedral Hills Trail System, Grants Pass Oregon
Tall trees at Cathedral Hills Trail System, Grants Pass Oregon

On the following Tuesday, I headed out from Grants Pass to head to California if only to tick off the box on POTA’s website saying I’d activated there. I had no idea that Highway 199 would be so scenic. I activated six entities on this day.

At the end of Highway 199 is Tolowa Dunes State Park (K-1202). The photo at the top of this article is on the dunes and at the coast of the Pacific Ocean near Crescent City CA. Yes, I walked along the surf despite the threatening weather. It also allowed me the luxury to park within the dunes themselves to do my activation with a spectacular view. Continue reading 2,112 miles as AI7LK in the US Pacific Northwest

Check Out Vince’s Quick Start Guide to SOTAmat!

If you’re not familiar, SOTAmat is an incredibly valuable app and tool for spotting yourself on the SOTA or POTA networks when you’re truly off-grid and outside the range of mobile phone service.

Check out this two minute intro to SOTAmat:

Setting up SOTAmat for the first time can be a bit confusing, but it’s not difficult. It is important, however, that everything is set up in advance of your SOTA or POTA adventures.

Our friend Vince (VE6LK) has just published a “Quick Start” guide to SOTAmat. It’s concise, and covers everything you’ll need to get set up and running with SOTAmat!

Click here to watch on YouTube.

Thanks for putting this tutorial together, Vince!

SOTAmat is an incredibly powerful resource for those of us who activate parks and summits in remote locations. I highly recommend downloading the app and making it a part of your SOTA/POTA tool kit!

For more information about SOTAmat and for links to the apps, check out the SOTAmat website!

Business Travel & POTA: It’s as simple as One … Two … Three!

by Vince (VE6LK)

As always there are lots of links within the article. Click one! Click them all! Learn all the things! 🙂

The backstory

For those of us that work from home there are good and not-so-good things about it. One of the not-so-good things is that I’m not getting out somewhere every day like I used to, thus I embrace corporate travel as it represents a mini-escape from the day-to-day activities that would normally happen.  It also gives me an opportunity to operate in the field and away from the comfort of sites nearby my home.

In late September I was in the Edmonton Alberta area for work and, as always, I brought along a set of gear to play radio. Where I’d normally drive up and park my F-350 within the boundaries of the park and operate from the cab of the truck, this time I was in a rental vehicle so I had to be well-equipped for the unknowns. I also didn’t pre-plan my stops like I normally would, I just wanted to roll up and do my best to make it work.

These would all be CW activations at QRP power and are part of my 200 CW activation contacts per month personal goal to improve my CW skills. (Spoiler alert: I hit the goal while writing this article!) See below for my kit list that made this possible.

Not really pre-planning an activation is a stark contrast to how I normally roll as I usually pore over maps and satellite views on multiple websites to visualize where the park entrance is and where I’ll set myself and what I may encounter for surroundings when I get there. I know exactly where I’m going and just about down to the parking space. I build a set of kit up to support that/those activation/s.

With the lovely autumn weather we were experiencing in Alberta, my plan was to activate after work opportunistically around Edmonton – something I’d not yet done despite many trips to the area – and set up and operate right around 0000z. This time is after my workday, so a nice mental break from the day’s activities before kicking back for the evening. I think to my self that I’ll roll into a site nearest to where I was working arriving just before midnight UTC (1800h local) and get set up and start calling once the clock ticked over into a new day. From there I would then head to the hotel (or home) and grab a bite to eat and close my day off on a high note.

Continue reading Business Travel & POTA: It’s as simple as One … Two … Three!