Activating (sort of) Lake Thunderbird (K-2792) with a homebrew transmitter

Sam Duwe WN5C

When I dove into radio a couple years ago a few sub-hobbies caught my attention: QRP, portable ops, CW, and homebrew. Of course, these all fit nicely together, but in my mind there was a huge leap between soldering an unun and a building a radio. But why not try? What’s the worst that could happen by melting solder and then sitting at a picnic table? This is how I built a simple transmitter and kind of activated a park.

The Michigan Mighty Mite

Nearly everyone has heard about the Michigan Mighty Mite (MMM), a QRPp transmitter popularized by the Solder Smoke blog. There are countless YouTube videos and posts across the internet. It’s very simple: a single transistor, a variable cap, a coil, a crystal and some resistors and a cap. Supposedly one can get up to half a watt of output (I couldn’t). But with a small purchase from Mouser one can oscillate. That seemed pretty cool.

I hadn’t touched an iron until I started playing radio. But I’ve been drawn to homebrew projects. I built a regenerative receiver last year which was very rewarding. I’ve also put together kits (a QCX mini and a TR-35). But my dream has always been to construct a transmitter/receiver combo, or a transceiver. I thought a good place to start was the MMM.

I built the transmitter based on the common schematic for the 40-meter band. The MMM is crystal controlled but I opted to solder in a socket and buy a handful of crystals, so I have the luxury of operating on 7056, 7040, and 7030 kHz. I made a few other improvements, too. The first was to build a low pass filter to attenuate harmonics. Second, although I haven’t finished it yet, the switch on the right will be to choose between multiple crystals. And third, I added a BNC jack to connect a receiver, with a transmit switch. When not in use the transmitter will dump into a dummy load. This receiver switching idea was lifted from the design of the MMM that QRP Guys produces.

When I tested the transmitter at home the best I could get with my charged Bioenno 3 Ah battery was about 300 mW output. The filter is reducing things somewhat, but maybe I need to look into a different transistor or rewind the coil. But I was able to get a 339 signal report from Illinois (no sked) in the midst of distance lightning crashes, so I had a little confidence going forwards. School is out for me this summer, so I decided to head to the park. Continue reading Guest Post: Lake Thunderbird (K-2792) with a homebrew transmitter! →