On Tuesday, February 13, 2024, one of my daughters had a dress rehearsal for A Midsummer Night’s Dream. The venue where the cast meets is a good 45 minutes from my QTH, and if I didn’t have POTA fever, I’d have to find something to do to burn four hours of time.

Since I do have POTA fever, I see these windows of waiting around as an opportunity!

An opportunity to spread the POTA fever, even.

On that particular Tuesday night, my dear friend Vlado (N3CZ) didn’t have any plans, so I invited him to join me on a short, late-shift activation. The idea was that he’d perform an activation, then we’d go grab dinner at a restaurant in Mills River.

Pisgah National Forest (K-4510) and Game Land (K-6937)

Quick note about park numbers: As of the time of publishing this article, we’re still using the “K” prefix for US parks. Tomorrow (March 20, 2024), all US park prefixes will change to “US.” Pisgah National Forest, for example, will be US-4510 starting tomorrow. Today, it’s still (barely!) K-4510, so that’s what we’ll use.

We drove to the Sycamore Flats Picnic Area where I performed a number of late-shift activations in February. What I love about the site is that it’s rarely busy (especially at dusk and into the evening), there are numerous spots to set up, and it’s pretty convenient to the Shakespeare venue.

Tufteln AX1 Antenna Stand

I’d mentioned to Vlado in advance that I was going to test “a new antenna support system.” I think he might have assumed I was packing a large tripod with a 1/4 vertical or something similar, so it was fun to pull out the AX1 and  Tufteln AX1 Antenna Stand!

Vlado, like me, loves compact radio gear, and I knew he’d never used the Elecraft AX1 before, so I was looking forward to showing him just how capable of an antenna it is for POTA, even on 40 meters.

That day, it had been pretty gusty, and in the evening hours, while a little calmer, it was still a tad windy. I thought it would be the perfect opportunity to pair the AX1 with Joshua’s AX1 stand because it’s much more stable than the AX1 bipod in windy conditions.

The stand consists of two parts: a base and an antenna sleeve. The sleeve screws into the base, and the AX1 simply slides into the sleeve. The height is perfect for the KX2’s BNC (indeed, it works with a number of radios). The stand will also accommodate the AXE 40M coil.

When attached to the KX2, it makes for a very stable base. You can even use it as a stand-alone antenna support for the AX1.

Joshua has had this stand in his Tufteln product line for over a year, but I don’t think I’ve actually used it during an activation that I’ve also filmed.

New Mics!

Speaking of filming, this activation with Vlado gave me an opportunity to test my new DJI wireless mics. The system comes with two mics so both Vlado and I used them.

I filmed the activation, but in truth, was doing this more or less to test the mic audio. I believe I mentioned early on that this video might not ever be published.

In the end, I decided to publish it–the audio was quite good, and the wireless mics cut down on the wind noise dramatically.

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

• Elecraft KX2 with Windcamp X2 Side Rails and Cover
• Tufteln KX2 Protective Cover
• Elecraft KXBT2 Li-Ion Battery Pack
• LowePro CS60 Hard Side Case
• Elecraft AX1
• Tufteln AX1 Antenna Stand
• Key cable: Cable Matters 2-Pack Gold-Plated Retractable Aux Cable – 2.5 Feet
  
• Begali Traveler
• GoRuck GR1 USA
• GraphGear 0.9mm 1000 Automatic Drafting Pencil
• ‎Rite In The Rain Top Spiral Notebook
• Camera: DJI OSMO 4 action camera with Sensyne Phone Tripod
• DJI Wireless Microphones
• Goal Zero Lighthouse 600 Camping Lantern
• Fenix HM65R-T Headlamp
• My fingerless gloves

N3CZ: On The Air

My goal was to get Vlado on the air and give him a taste of POTA using the AX1 and 40M coil. I hadn’t planned to activate–since we were grabbing dinner afterward–but I did end up activating after the UTC day changed.

Without realizing it, I actually put a lot of pressure on Vlado.

He started his activation at 18:42 local (23:42 UTC). That meant, in order to log a valid POTA activation on February 13, he needed to log at least ten contacts in 18 minutes (using the AX1!).

Keep in mind that Vlado is a contester and DXer (also, very much a QRPer!). He’s used to operating CW at insane speeds when needed. In fact, he’s always one of the top people (if not the top) in the CW speed test at the W4DXCC contesting and DX conference.

I suggested he operate around 20 words per minute.

He started calling CQ POTA, and the first few contacts came in pretty slowly. I was getting nervous that I might have unintentionally made Vlado’s first POTA activation one that wouldn’t be valid.

Then the pace started picking up. (Whew!)

He ended up logging a total of 10 contacts in 12 minutes! Woo hoo!

Here’s his QSO Map, showing what the AX1 pushing 5 watts for twelve minutes can do:

Next, we decided that I would, indeed, perform a quick activation.

I spotted myself on the POTA site and started to call CQ, then it hit me: it was 23:58 UTC. If I worked one contact in that two minutes, it would be considered an activation on February 13 of only one contact.

Instead, we waited for a little over a minute for the UTC day to change!

I ended up working a total of 24 contacts in 21 minutes. Woo hoo!

Here’s my QSO Map:

And here are our logs:

Activation Video

Here’s my real-time, real-life video of the entire activation.  As with all of my videos, I don’t edit out any parts of the on-air activation time. In addition, I have monetization turned off on YouTube, although that doesn’t stop them from inserting ads before and after my videos.

Note that Patreon supporters can watch and even download this video 100% ad-free through Vimeo on my Patreon page:

Click here to view on YouTube.

What fun!

I always enjoy hitting the field with Vlado.

Since this quick little activation, he’s been out there hitting POTA sites regularly.

He hasn’t seen the doctor yet, but I’m positive he caught POTA fever. It’s incredibly contagious.

Also, the Tufteln AX1 stand worked perfectly in the wind. I’m going to keep this tucked away in my pack alongside my second AX1 to pair with a wide variety of radios.

Thank you!

Thank you for joining me during this activation!
I hope you enjoyed the field report and my activation video as much as I enjoyed creating them!

Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon, and the Coffee Fund. While not a requirement, as my content will always be free, I really appreciate the support.

As I mentioned before, the Patreon platform connected to Vimeo makes it possible for me to share videos that are not only 100% ad-free but also downloadable for offline viewing. The Vimeo account also serves as a third backup for my video files.
Thanks for spending part of your day with me!
Cheers & 72,
Thomas (K4SWL)