Field Report: More Xiegu G106 POTA time and I rope in Brooks to log!

On Friday, February 10, 2023, I had a hankering to fit in a POTA activation that morning. South Mountains State Park was an easy detour on my drive back to the QTH, so I scheduled an activation.

I’d also been meaning to meet up with Brooks (KO4QCC). Brooks started his POTA journey not even one year ago–here’s a field report from his first SSB POTA activation.

Brooks has been steadily working on his CW skills and is dangerously close to doing his first CW activation. We’ve managed to set up one late evening casual CW rag chew and I think his CW chops are very good.  We plan to do more evening rag chews when our schedules align. He’s made amazing progress.

I contacted Brooks that Friday morning and he was game to meet up and do some POTA. He wasn’t quite ready to do a CW activation, so I suggested he log for me using the HAMRS app on my iPhone. I find that logging for CW ops during past Field Days really helped build my own confidence before I started using CW daily.

Brooks was 100% game to log for me.

And let me just say what a luxury it is to have someone log to HAMRS for me on my iPhone! It frees up my brain to simply log on paper (which I always do) and enjoy working stations without the extra busy work! Hat tip to good ole’ Brooks.

South Mountains State Park (K-2753)

I arrived at South Mountains State Park (the Clear Creek Access), put on my hiking boots, then Brooks pulled into the parking lot only a few minutes later.

We agreed in advance to fit in a quick hike up the Clear Creek Trail prior to the activation. I, for one, really needed to stretch my legs!

After the hike, I grabbed some gear from the car and we set up at the one picnic table at the Clear Creek Access.

Brooks and I both had commitments that day so could only play radio for 45-60 minutes max including set-up and take-down.

I deployed the same antenna I’d used the previous day: MW0SAW’s homebrew EFHW on a SOTAbeams winder.

Deployment didn’t take long–since the 40M EFHW is resonant on both 20 and 40 meters, there was no need for an external ATU. I powered the G106 with a 3Ah LiFePo4 battery via my Ham Radio Workbench DC Distribution Panel.

Brooks was fired up and ready to decode and log some CW. I decreased the speed on the G106 keyer a couple words per minute in hopes it might slow down my hunters a bit, too.

Gear

Note: All Amazon, CW Morse, and eBay links are affiliate links that support the QRPer.com at no cost to you.

On The Air

I hopped on the air, started calling CQ POTA and the POTA site auto-spotted me via the RBN. I never get tired of this amazing convenience–RBN auto-spotting played no small role in my journey into the world of CW activations!

I worked my first ten stations in 11 minutes thus validating the activation.

I continued operating for an additional 19 minutes logging a total of 26 stations, all on 20 meters.

Both Brooks and I simply ran out of time, else I would have loved to continued logging more stations on 20 meters.

QSO Map

Here’s what this activation looked like when plotted out on a QSO Map. Not bad at all!

Activation Video

Here’s my real-time, real-life video of the entire activation.  As with all of my videos, I don’t edit out any parts of the on-air activation time. In addition, I have monetization turned off on YouTube, although that doesn’t stop them from inserting ads before and after my videos.

Note that Patreon supporters can watch and even download this video 100% ad-free through Vimeo on my Patreon page:

Click here to view on YouTube.

Thank you

Found these guys blooming at the QTH later that day. They popped up a bit early this year.

Thank you for joining Brooks and me on this activation!

And, Brooks, thanks for logging!

I do think Brooks is ready to activate in CW and he’s already suggested I make a video of his first CW activation. What a great guy! It’s been wonderful seeing all that he has accomplished in less than a year of being on the air.

I hope you enjoyed the field report and this activation video as much as I enjoyed creating them.

Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon and the Coffee Fund. While certainly not a requirement as my content will always be free, I really appreciate the support.

As I mentioned before, the Patreon platform connected to Vimeo make it possible for me to share videos that are not only 100% ad-free, but also downloadable for offline viewing. The Vimeo account also serves as a third backup for my video files.

Thanks for spending part of your day with me; have a wonderful weekend!

Cheers & 72,

Thomas (K4SWL)

5 thoughts on “Field Report: More Xiegu G106 POTA time and I rope in Brooks to log!”

  1. Curious if you like this more than the 6100? I think I am seeing more posts with the G106 from you and I am wondering if you like this more.

    I love your videos and posts!
    Thanks!
    Bret
    KC3DJV

    1. Hi, Bret,

      Thank you! Good question. I like the size and weight of the G106, but otherwise I prefer the X6100 because it has so much more flexibility in terms of adjustments and metering. The G106 is pretty darn basic, but gets the job done. I’m eager to build my BCI filter and see how this performs with one in place.

      Cheers,
      Thomas

  2. Great videos, Thomas. I’ve always preferred cw after getting my general license in the late 80s but due to life, raising kids, work, other hobbies and time limitations I’ve been in and out of ham radio.
    And then something odd happened a few months ago, my interest in the hobby swung back around and I am on the air daily now. I feel like a teenager again and am playing with new gear, building antennas, and just really enjoying it.
    I recently picked up a g106 and have gotten to seriously like it. It’s quirky but solid, simple, and I like the good sized screen with no extra clutter. I built a little rj9 plug adapter for a dedicated headphone jack and put a small inline usb charged headphone amplifier and now the audio on my earbuds is awesome. I think this rig has gotten some unfair bad reviews. Keep up the great videos. 72s
    Dan
    N3HNA

    1. Wow! Good on you, Dan!

      I’ll admit that the G106 is growing on me. I’m very interested to see how it performs once I build and use my in-line BCI filter.

      Hey…from one CW teenager to another…keep up the great work and radio play!

      Cheers,
      Thomas

  3. I wonder if anyone is willing to test the G106 for HF false RX mixing products? It would only take a few minutes to do the test and it would give an indication as to whether this is just my rig or a characteristic of the G106 in general. Please don’t make me buy another radio just to find out, I already have acquisitional madness already!

    The test; tune to R. Habana at 6000 kHz at night when it is loud. Then tune to 2000 kHz and see if the signal is still noted fairly loud.

    This is my biggest remaining problem with the G106. My unit has mixing products of this sort all over, 40 meter CW signals show up around 710 kHz, 20 Meter signals show up around 4700 kHz etc. A BCB filter doesn’t help with this, so it’s not intermod w/BCB stations.

    73, Kevin K3OX

Leave a Reply to Bret Fledderjohn Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.