Tag Archives: Pete (WB9FLW)

Kits, News, QRP, QRP Radios

QRP Labs Announces The QSX Transceiver

3 Comments
The QSX Transceiver

Many thanks to Pete Eaton (WB9FLW) who writes:

QRP Labs has just announced the QSX an All-Band All-Mode Transceiver Kit that should be available later this year. The Target price for the 10 Band Model is $150, also available will be a 40 Meter version for $75.00.

Details from QRP Labs:

QSX (QRP Labs SSB Xcvr) is a 40m SSB transceiver with 10-band (160m-10m) and enclosure options. The kit inherits all the functionality of the famous QCX single-band CW transceiver kit but adds SSB, AM, FM, PSK31 and RTTY. This will be the lowest cost all-HF radio available but also high performance and packed with features. These are the planned features of QSX:

  • Software Defined Radio (SDR) technology with standalone Digital Signal Processing (DSP), no PC required
  • Very high performance 24-bit Analog to Digital Converter (ADC) and 24-bit Digital to Analog Converter (DAC)
  • 40m (single band) or 160-10m (10-band, including 60m) versions available
  • Modes: SSB, CW, AM, FM, PSK31, RTTY, WSPR beacon
  • Power output: 10W from 13.8V supply (power output is adjustable by the firmware)
  • Single power supply needed, 12V to 14V
  • USB host interface and connector, for USB keyboard to allow PC-less operation on PSK31 and RTTY
  • USB device interface and connector, for PC CAT Control
  • QSX can appear to a PC as a high performance 24-bit USB sound card and radio – for digital modes from a PC e.g. FT8, either demodulated or as I-Q for PC SDR programs
  • Built-in CW IAMBIC keyer (or straight keying also possible) with raised-cosine key-envelope shaping
  • DSP features (selectable sharp filters, AGC, Speech Compression, Noise Reduction etc.)
  • Dual microphone inputs (mobile phone headset with VOX, or RJ45 connector for Kenwood/Yaesu mics)
  • Dual VFO (A/B/Split), frequency and message memories
  • Through-hole assembly only
  • Built-in test equipment features for alignment, debugging and general purpose use
  • Detailed assembly manual
  • Macro facility for user defined sequences of operations, or redefinition of controls
  • Front panel: 16 x 2 LCD (yellow/green backlight), 2 rotary encoders, 4 buttons, mic/earphones socket
  • Soft-power on/off switch, the radio saves its state automatically on switch off, so that it starts up in the same state next time
  • Free firmware updates for life, very simple firmware update procedure via a USB memory stic

QSX is still in development! The above list is subject to change. The following is a FAQ with information about QSX.

More Info on QRP Labs Web Page:

https://www.qrp-labs.com/qsx.html

Check out the following video from YOTA 2018:

Click here to view on YouTube.

Fantastic! Many thanks for sharing this, Pete! This looks like a brilliant little kit for any skill level of patient kit builder.

Announcements, Kits, News, Product Announcements, QRP, QRP Radios

The uBITX Transceiver: Pricing and more details

5 Comments

Many thanks to Pete Eaton (WB9FLW) who shares pricing and additional information about the uBITX general coverage QRP transceiver:

Here are the details, if purchased before Christmas $109 delivered!

http://www.hfsignals.com/

From uBITX creator, Ashhar Farhan:

1. The ubitx is now available for sale, for $109 dollars (includes the shipping), but only until Christmas. *After Christmas, the price will increase to $129 dollars. for this initial batch, a few ham volunteers and I pitched in to sort the crystals, test the coils, tune-up and box these initial kits, we won’t be able to do that any more. we will have to hire more people (which is not a bad thing) and get them to do it.

2. The ubitx is on sale at hfsignals.com, not hfsigs.com. it is easier to remember. we will soon point hfsigs.com to the new website as well. The new site is in wordpress, that means that we can have volunteers writing and updating it rather than waiting for me to hand code the content in html and vi editor.

3. We need help with proof reading the web content.* If you find any typos, please mail me on [email protected] address (not the bitx20 list),

These apart, the early buyers must be aware that they are beta users of sorts, the firmware will sure get updated. i hope there won’t be any revisions of the PCB.

Pete adds:

Just as an aside the original price of the Heathkit HW-8 was $139.95 (in 1970 dollars) and it became a QRP Classic. The uBITX may become  one as well and like the HW-8 there will be (and already are) all sorts of mods/additions one will be able to do. The uBITX is 10 dollars cheaper (after 12/25) works 80-10 M, does SSB in addition to CW, and is a Superhet to boot!

Farhan your hit this one out of the Ballpark!

Very cool, Pete!  I am very tempted to purchase the uBITX transceiver before Christmas and have it delivered via DHL service.  The only thing holding me back is simply the amount of projects I have on my table at the moment! $109 is an incredibly low price for a full-fledged QRP transceiver!

I’m absolutely amazed that it is also has a general coverage receiver.  Perhaps the uBITX could serve the SWL as well as the ham radio operator?  I suppose we shall soon find out!

Click here to read our other posts regarding the uBITX transceiver.

Click here to order the uBITX transceiver kit.

Please comment if you plan to or have purchased the uBITX. We’d love your feedback!

Announcements, News, Product Announcements

CommRadio CTX-10 price posted

1 Comment

Many thanks to Pete Eaton who notes that the new CommRadio CTX-10 pricing has been posted on Universal Radio’s website. It appears Universal is already taking orders. The price is $999.99 US:

News, Portable, QRP Radios

The uBITX Transceiver: An Update

3 Comments

Many thanks to Pete Eaton (WB9FLW) who shares the following post:

Last March Ashhar Farhan VU2ESE the designer of the very popular BITX20 and BITX40 series of mono-band HF Transceivers announced a new low cost Rig called the uBITX (micro BITX) a full blown 80-10m 10 Watt SSB/CW Transceiver. Now comes word that after many months of very hard development work by Ashhar this much anticipated Rig will soon be available.

For those not familiar with the Project this is *not* a kit, rather like its sibling (the BITX40) it consists of two assembled and tested Circuit Boards. The RF board measures 5.5 x 6 inches and a second small plug in daughter card that takes care of the digital portion of the design including the 2X16 LCD, Arduino Nano, and Si5351 which are used in the VFO. Add a Cabinet, Knobs, and Connectors and you have a full blown HF Rig. An added plus is that except for the Gerber PCB files everything else (including the firmware) is Open Sourced!

The original description can be found here:

http://www.phonestack.com/farhan/ubitx/ubitx.html

Farhan has just released the Firmware, Schematics, and Wiring Diagram for the production version on GitHub

Arduino Sketch:

https://github.com/afarhan/ubitx

RF Board Schematic:

https://github.com/afarhan/ubitx/blob/e481ea2a2457fc4e7be7a6a4bc9a0fba12bf2cde/ubitxv3.pdf

Digital (Raduino) Board Schematic:

http://www.phonestack.com/farhan/ubitx/raduino.pdf

Wiring Diagram:

https://github.com/afarhan/ubitx/blob/e481ea2a2457fc4e7be7a6a4bc9a0fba12bf2cde/ubitx_wiring.png

Farhan has a social conscience as well giving several local Ladies much needed employment for final assembly and checkout of the Rigs.

There are still a few final tweaks being done to the design so pricing is still to be determined. But if it’s offered at a similar price point as his earlier Transceivers it should sell like Hotcakes!

For the latest info check out the BITX User Group at:

https://groups.io/g/BITX20

Wow!  Amazing project!  Thanks for the tip and updates, Pete!

Kits, Morse Code, News

Videos featuring the QCX Transceiver kit

1 Comment

Many thanks to Pete (WB9FLW) who shares the following videos and notes:

Hans Summer G0UPL has released an excellent YouTube Video describing the QCX Transceiver Kit, its Design, and Operating Features:

Click here to view on YouTube.

[And] Roberto IZ7VHF has a much more detailed video of The QCX Transceiver.

Click here to view on YouTube.

Looks like people are catching QCX Fever! What an amazing Radio!

I agree, Pete! It’s simply amazing how self-contained this transceiver is. I like the fact that the kit is through-hole and that the board appears to be high quality. I will soon have one on order. This will be a fun winter project!  Thanks for sharing, Pete!

Kits, Morse Code, News, Product Announcements, QRP

QRP Labs’s $49 QCX 5W single-band transceiver kit

Leave a comment

Many thanks to Pete (WB9FLW) who notes:

“QRP Labs has just come out with the full feature CW Transceiver Kit for $49.00!”

(Source: QRP Labs)

The “QCX” is a 5W, single-band, high performance CW transceiver kit with WSPR beacon, and built-in alignment/test equipment. It is available for 80, 60, 40, 30, 20 or 17m bands. See below for the long list of features! This is a kit of parts that you assemble yourself. There are NO surface mount components to solder (two SMD ICs are already factory pre-soldered). We do not currently have any enclosure available for this kit, it may be something we investigate in the future.

Features

  • Easy to build, single-board design, 10 x 8cm, all controls are board-mounted
  • Professional quality double-sided, through-hole plated, silk-screen printed PCB
  • Choice of single band, 80, 60, 40, 30, 20 or 17m
  • Approximately 3-5W CW output (depending on supply voltage)
  • 7-16V recommended supply voltage
  • Class E power amplifier, transistors run cool… even with no heatsinks
  • 7-element Low Pass Filter ensures regulatory compliance
  • CW envelope shaping to remove key clicks
  • High performance receiver with at least 50dB of unwanted sideband cancellation
  • 200Hz CW filter with no ringing
  • Si5351A Synthesized VFO with rotary encoder tuning
  • 16 x 2 blue backlight LCD screen
  • Iambic keyer or straight key option included in the firmware
  • Simple Digital Signal Processing assisted CW decoder, displayed real-time on-screen
  • On-screen S-meter
  • Full or semi QSK operation using fast solid-state transmit/receive switching
  • Frequency presets, VFO A/B Split operation, RIT, configurable CW Offset
  • Configurable sidetone frequency and volume
  • Connectors: Power, 3.5mm keyer jack, 3.5mm stereo earphone jack, BNC RF output
  • Onboard microswitch can be used as a simple straight Morse key
  • Built-in test signal generator and alignment tools to complete simple set-up adjustments
  • Built-in test equipment: voltmeter, RF power meter, frequency counter, signal generator
  • Beacon mode, supporting automatic CW or WSPR operation
  • GPS interface for reference frequency calibration and time-keeping (for WSPR beacon)

Pete adds:

Check the manual out, it’s 138 pages! Even a rank beginner can successfully build this rig.

https://qrp-labs.com/images/qcx/assembly_LT.pdf

Thank you for the tip, Pete! That’s an amazing amount of transceiver for the price. You’re right, I believe even a new kit builder could build this transceiver.