Tag Archives: mAT-705

Announcements, Antennas, New Products, News, Portable, QRP Radios, Reviews, Videos

Testing the updated and upgraded Mat-Tuner mAT-705Plus portable IC-705 antenna tuner

December 18, 2020 Thomas Witherspoon 14 Comments

On Wednesday (December 16, 2020) I took delivery of the new Mat-Tuner mAT-705Plus ATU.

Mat-Tuner sent this updated and upgraded version of the mAT-705 ATU to me at no cost and asked that I give it a thorough evaluation in the field.

History of the mAT-705

If you’ve been following the story of this tuner, it was the first introduced in September 2020 and designed to pair directly with the Icom IC-705 transceiver. Note that Icom plans to introduce their own IC-705 antenna tuner (the AH-705) but it is not yet on the market at time of posting, so the mAT-705 has certainly had a market opening.

The original mAT-705 had a mechanical power switch on the front/faceplate.

I received the original mAT-705 ATU via Mat-Tuner US distributor, Vibroplex, around the same time I received my Icom IC-705 in early October. I took the original mAT-705 to the field and made a quick video demonstrating its ability to find matches from 160 to 6 meters. In short, it did a brilliant job.

A couple weeks later, however, I discovered that the original mAT-705 had some design shortcomings. I updated my review with this follow-up post. In brief, the mAT-705 could deplete a 9V alkaline battery within a couple of days if you failed to turn off the tuner’s mechanical on/off switch.

Replacing the internal 9V battery was a complicated procedure requiring the user to carefully detach the front panel without losing the LED lenses that were prone to simply pop out. The 9V battery was mounted internally on the board with adhesive–obviously, not an ideal situation for an ATU that would require frequent battery replacement. Due to this, I simply could not recommend the original mAT-705–it was too pricey at $220 for an antenna tuner with so many design shortcomings. For full details, read this post.

Introducing the mAT-705Plus

Mat-Tuner was obviously listening to customer feedback, because within two months they introduced the upgraded and updated mAT-705Plus antenna tuner.

Here are the mAT-705 upgrades:

No mechanical on/off switch–power is internally managed
9V battery replaced with 1000 mAh internal lithium cells
Batteries are internally charged via USB-C port
No longer necessary to open the enclosure/housing

Update: Using the mAT-705Plus with other transceivers

Since the new mAT-705Plus lacks a power switch to manually turn it on, I originally noted that I was unsure if it could be engaged via RF sensing when paired with other transceivers. I tried to no avail. Before posting this review, I sent an inquiry to Mat-Tuner about this. Here is their reply:

The power of the new version of the mAT-705Plus tuner is controlled by the KEY signal of the control cable. When KEY is high, the tuner is automatically turned on. The function of following the transmitter to automatically turn on and off is realized.

In addition, the mAT-705Plus tuner follows the ICOM tuner protocol. Like other ICOM tuners, you can manually start the tuning cycle by manually customizing the control cable, just like the AT-120 tuner.

After you solve the KEY signal to trigger the tuner to start and make a manual control cable, you can use it [the mAT-705Plus] for other non-ICOM brand transmitters. But we do not recommend you to use it this way.

Because it is specially designed for the IC-705 transmitter, [it must be modified for use with] other transmitters, which many customers cannot do.

[Since] it uses a magnetic latching relay, after completing the tuning cycle, you can completely turn off the IC-705 transmitter power and connect the tuner to other transmitters.
The tuner will remain in the tuning state.

To clarify, I believe what the Mat-Tuner engineer meant is that if you tune an antenna with the IC-705, you can power the rig down, connect the mAT-705 to another transmitter and the mAT-705 will preserve the last tuner setting (the last match).

Let’s see the mAT-705Plus in action!

Yesterday, I took the mAT-705Plus to the field and paired it with my Chameleon Emcomm III Portable random wire antenna.

I made the following real-time no-edit video yesterday afternoon. Other than charging the mAT-705Plus batteries the night before, this video captures its first time being connected and used.

The Emcomm III Portable random wire antenna’s frequency range is 160-6 meters–the mAT-705Plus quickly found matches on every band.

Summary

At first blush, the mAT-705Plus looks like the ATU Mat-Tuner should have released on the first go: it’s portable, lightweight, fully automatic, rechargeable, and quickly finds matches across the HF spectrum.

Size comparison: mST-705Plus (left) Elecraft T1 (right)

We’ll see how well the power management works in real life. I plan to take it to the field over the next few months and carry a small USB battery pack to recharge the mAT-705Plus when the batteries are finally depleted. Hopefully, I won’t need to recharge it for a long time! The proof will be in the pudding!

Of course, I’ll also pair the mAT-705Plus with an assortment of antennas: random wires, verticals, delta loops, doublets, dipoles, and end-feds.

Stay tuned! [See what I did there? Rimshot anyone? Anyone–?] 🙂

Mat-Tuner authorized distributors:

North America: Vibroplex
Germany and Spain: Wimo

New Products, News, Portable

New mAT-705Plus ATU now in stock and shipping

December 10, 2020 Thomas Witherspoon 6 Comments

I’ve just learned from Vibroplex that they are now shipping a new, upgraded version of the mAT-Tuner designed specifically to pair with the Icom IC-705 transceiver.

This model is called the mAT-705Plus.

You might recall from previous posts that I found the original mAT-705 to be an excellent ATU for finding matches, but later discovered it had a number of design shortcomings that prevented me from recommending it. The main issues with the original mAT-705 had to do with how quickly it consumed 9V batteries if the power switch was left in the “on” position, and then how complicated it was replacing batteries.

The mAT-705Plus seems to address these concerns by now employing 1000 mAh internal lithium cells that can be charged via a USB power source. It appears they’ve done away with the mechanical power switch altogether and the unit now manages power automatically which, to me, is a much better design approach.

Mat-Tuner reached out last week and are sending me an mAT-705Plus to evaluate. I look forward to putting it through the paces and see if this upgraded ATU is worth considering.

Click here to check out the mAT-705 Plus at Vibroplex.

Antennas, News, POTA, QRP

Icom IC-705: Reviewing the Mat-Tuner mAT-705 in the field

October 6, 2020 Thomas Witherspoon 8 Comments

UPDATE: My review of the mAT-705 ATU below is accurate as of its original posting. Since this review, however, I’ve discovered some design issues that prevent me from continuing to recommend it. Click here for details.

UPDATE 2: Mat-Tuner released the latest updated and upgraded version of the mAT-705 in December 2020. It’s called the mAT-705Plus. Click here to read my initial review of the mAT-705Plus. Note that the following article pertains to the original mAT-705 which is no no longer being produced, but still available for sale (at time of posting) both new and used.

Last week, Vibroplex sent me their new Mat-Tuner mAT-705 external ATU on loan to evaluate with my recently acquired Icom IC-705.

Here’s some info about the mAT-705 from Vibroplex’s product page:

The new mAT-705 antenna tuner is designed specifically for use with the new Icom IC-705 QRP transceiver. Connect the mAT-705 directly to the TUNER jack on the IC-705 with the included cable and control the antenna tuner directly from the front panel of the radio or use RF-sensing to actuate the tuner when changing bands. 1.8-54 MHz, 5-1500 ohms matching range, 16000 user memories recalling previous used settings internal to the tuner when returning to an earlier used frequency.

The tuner is powered by an internal standard 9 volt alkaline battery. Power saving technology inside the tuner allows the use of the unit for months without replacement. No battery power is consumed by the unit when powered off.

Yesterday, I stopped by South Mountains State Game Land (K-6952) to give the mAT-705 some field time. Up to this point, I had not used the tuner other than tuning to the 80 and 40 meter bands from home (mainly to make sure it worked before hitting the field).

To really give the mAT-705 a workout, I deployed my CHA Emcomm III Portable random wire antenna. The Emcomm III is the only field antenna in my arsenal that covers 160 meters – 6 meters–an exceptionally wide frequency range.

What I like about this particular POTA site is the open parking area which allows me to configure the Emcomm III a number of ways.

The Emcomm III, being a wire antenna, is incredibly stealthy. Since you can’t see it in the photo above, I’ve marked up the configuration below (click to enlarge):

I’m guessing the apex of the antenna was easily 45′ high.

Activating

I started my activation on the 80 meter band.

After working a few stations on 80 meters, I decided to test the mAT-Tuner over a fairly wide frequency range before calling CQ on the 40 meter band.

Here’s a short video:

POTA Hunters: look for me on the 160 meter band this fall and winter! I’m so impressed how well it matched the Emcomm III on 160.

Indeed, I am very pleased with how quickly and efficiently the mAT-705 found matches on every band I tested.

In terms of form factor, the mAT-705 is quite compact, but a little longer in length than I had anticipated. Honestly, though, there’s nothing here to complain about.

The enclosure/chassis is incredibly strong. I’m willing to bet you could accidentally drive over it with your car and it would survive in tact.

The mAT is powered by an alkaline 9V battery. Vibroplex expects that this battery will last for months under normal use.

Note that there is a specific procedure for replacing the battery in order to protect the LED “illuminators” that are press-fit to the board.:

Remove the case by removing the 4 rear 2mm allen screws.
Turn the tuner upside down and shake it a little to get the PCB to slide out of the case enough to grab.
Carefully grasp the PCB sides and slide the board out slowly.

Update: I’ve followed the procedure above and still had an issue with the illuminators falling out. They really need to be secured better. I was able to re-insert them and close the ATU, but when you open the mAT-705 to change the battery, be in a space where you can capture both of them if they fall out.

Any mAT-705 negatives?

Not really, but I do feel the price is a little steep at $219.95–but then again the mAT-705 seems to do the job and do it well. I have to assume the TBA Icom AH-705 ATU will cost at least as much. I’m okay with paying at the top end of the market if I’m getting a quality product and this certainly seems like one.

I like the fact that the mAT-705 integrates perfectly with the IC-705 via the control cable and that I don’t have to worry about protecting it at all in my backpack. It’ll also take the IC-705 through the entire HF spectrum and even up to 6 meters.