Tag Archives: Brent (VA3YG)

Antenna Tuners, Antennas, Field Radio Kits, Grab And Go, Portable, Portable Power

Brent’s updated review of the CQHam TB Box

8 Comments

Many thanks to Brent (VA3YG) who writes:

Hi Thomas, hope you’re well.

Just a short message to bring you up to date on the performance of the new equipment.

In a nutshell, it’s brought me back to my old faithful friend, the FT-817. I bought my FT-817 20 years ago and it’s served me flawlessly all these years. It’s not the best at everything but it’s a perfect QRP shack-in-the-box.

The TB Box makes the little Yaesu a pleasure to use. The tuner tunes my 43’ vertical and K6ARK end fed random wire from 80-10 for the vertical and 40-10 for the ef random wire.

The battery tray slips out to reveal 6 Panasonic 18650 cells. The battery life is exceptional even with the 817 set on 5 watts. I’m just now in the process of topping the batteries up.

Attached are a couple pics of my operating situation today….it was such a nice day out on the driveway. I have a telescopic pole attached to the RV and strung the 41’ of wire up. Also, a closeup of the battery tray and one of the cells.

I can whole heartedly recommend this piece of gear to supplement an FT-817/FT-817ND/FT-818ND.

Loving it!

72/73,
Brent VA3YG

Very cool! Thank you for sharing the update, Brent! I’ll admit that I like the “old school” simplicity of this power and trans match system.

Click here to check out the CQHam TB Box on eBay. (partner link)

Antenna Tuners, Antennas, Field Radio Kits, News, QRP Radios

Brent’s initial impressions of the CQHAM TB-BOX

1 Comment

Many thanks to Brent (VA3YG) who writes:

Hello Thomas,

The Fedex courier just left my driveway. I ordered the CQHam TB box on Feb 29 and paid the $39 US for Expedited International shipping vs the Free Speedpack shipping from Hong Kong that promised it by June 1.  I really don’t like waiting for a parcel to arrive! Lol

I know there was some interest on your site about this product, so I thought I would write and give you some brief, first impressions.  Sadly,  I don’t have any more time to play with it until next week as I’m about to leave now to visit friends.

It arrived in 10 calendar days, well packed and everything inside survived the Fedex journey from Hong Kong to Southampton ON via Anchorage AK and Memphis TN.

No one would ever mistaken this equipment for gear made by Elecraft or Icom but it appears to work just fine. The variable capacitors are not smooth and the fit and finish is okay at best but I think, if you’re careful with it, and do your adjusting carefully, it should last you some time.

The “faux” leather case is actually quite nice and reminds me of the Yaesu FT-817 case.  As a bonus, a telescopic whip was included.

The batteries came charged and the rig showed 11.3vdc. I didn’t remove the battery tray as it didn’t want to slide out willingly and I didn’t want to force it. I’ll try that later when I have more time….

I connected my 43’ ZeroFive vertical with 30 radials to it and was able to tune from 80m right up to 10 meters with no problem.

I made a nice contact (my first phone contact in about 8 yrs) on 17 meters with a station in Biloxi.

It should be fun and it’ll give me an excuse to work the 817 again.

73 fer nw,
de Brent VA3YG

Thank you for sharing your initial impressions and the inside shots of the matching unit, Brent. We look forward to any updates you might provide as you spend more time with this field kit!

Kits, News, QRP, QRP Radios

Brent builds the Penntek TR-35 transceiver kit

10 Comments

Many thanks to Brent (VA3YG) who writes:

Good morning Thomas, from wintry southwestern Ontario.

I thought I would send you a quick message to share my experiences, so far, with the little TR-35.

Yesterday, around 3pm, I took the above unassembled kit off the shelf and began to melt solder. The smoke test was successfully performed the next morning at 1:30am, after non-stop building (with the exception of a few hours for eating and catching up on a little tv). I measure twice and solder once hihi.

I ordered the kit a few weeks back from John Dillon, WA3RNC, and it arrived quickly by courier and all in one piece. John has super customer service and knows how to pack for delivery. Continue reading Brent builds the Penntek TR-35 transceiver kit →