Many of you likely know that I’m on the crew of the Ham Radio Workbench podcast and that, in December 2023, we hosted the first Ham Radio Workbenches On The Air (HRWBOTA) event.

Unfortunately, I had one scheduling conflict I couldn’t change, which meant starting the event with my KH1 in a downtown Asheville parking lot before heading to Lake James State Park for a couple of hours of solid pileups with my Icom IC-705. I posted a field report and video of the event—it was a blast! Click here to check it out.

On March 16, 2025, we held our second HRWBOTA event, and this time, I was better prepared with a clear schedule and a plan to operate for the full four hours!

Zebulon Vance Birthplace (US-6856)

Of course, even the best-laid plans can run into hiccups, and mine did. I was delayed due to some chainsaw work I wanted to complete before leaving home. As a result, I arrived at US-6856 just as the event was starting (14:00 local).

No worries, though! I turned on the camera and wasted no time deploying my antenna and setting up my radio gear.

The Spooltenna!

For this activation, I used a prototype of the Spooltenna, designed by Rob (KO4HUI).

Rob, a fellow North Carolinian, had been in touch with me about his antenna idea for months. Back in February, when my daughter interviewed for a scholarship at NC State University (which she was later awarded!), I met up with Rob on campus, and he handed me an early prototype of the Spooltenna. He had just completed the build that very morning.

It’s a unique design based on his own needs for a field antenna. From his website:

SPOOLTENNA is a compact, lightweight antenna designed for portable amateur radio operations like Parks on the Air® (POTA) and Summits on the Air™ (SOTA). Its innovative spool form factor is intended to ensure efficient deployment, teardown, and storage, providing a frustration-free operating experience that doesn’t compromise performance.

The design is also Open Source under a Creative Commons Attribution-ShareAlike 4.0 International License.

The Spooltenna he gave me is a 40-meter end-fed half-wave (EFHW). Before this activation, I had only set it up at home to check resonance on 40, 20, 15, and 10 meters. I deployed it as a sloper, with the transformer at the highest point.

The Spooltenna is quick to deploy–by placing a pencil, tent stake, or screwdriver in the center hole–and the spool design ensures a tangle-free wind-up. The components feel very high-quality. Rob is also producing high-quality cable assemblies, which were included in the package he gave me.

Rob has rapidly turned this idea into a side business involving his whole family. In just two months, his wife Christi has launched a website, ordered inventory, and—just a week ago—even set up an affiliate program and coupon code offering free shipping to QRPer.com readers.

Rob will be at the Raleigh Amateur Radio Society hamfest this weekend. He plans to attend FDIM and Hamvention in Dayton next month with inventory.

UPDATE: Rob tells me that he will have some inventory at RARSfest this weekend and will even temporarily open up his website for Spooltenna orders tomorrow (Saturday, April 4, 2025) during the RARSfest. 

Again, I’m most impressed with all that he and his wife have accomplished in a few months.

Deploying the Spooltenna was easy, though I had to adjust my setup. I originally planned to support the transformer with a tree next to the picnic shelter, but that tree had been blown down during Hurricane Helene.

No worries! I set it up as a sloper with the transformer close to the ground—similar to many of my EFHW deployments.

My HRWBOTA Activation Plan

I planned to use two radios during this activation—first my Elecraft KX3, then my Penntek TR-45L on the lower bands.

To maximize the chance for HRWB listeners to work me:

• I did not spot myself on POTA.app, even though I was giving all contacts POTA credit. I knew that if I spotted myself, the normal weekend POTA pileups might make it harder for HRWBOTA participants to contact me.
• I started on 10 meters and slowly worked my way down.
• If time allowed, I planned to work SSB on at least one band (spoiler alert: CW kept me too busy!).

First up was the Elecraft KX3! I set up the radio and wasted no time getting on the air.

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, Spooltenna, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

Radio

• Elecraft KX3 with SideKX Side Rails and Cover

Antenna System

• Spooltenna 40 Meter End-Fed Half-Wave
• Spooltenna 25′ RG-316 Coax With 5 Ferrites

Battery

• Bioenno 15 Ah LiFePo Battery (Model BLF-1215A) please note that while I used a 15 Ah battery, a 3 or 4.5 Ah battery would have sufficed.

Key and Accessories

• CW Morse Outdoor Double Paddle With Steel Base
• Key cable: Cable Matters 2-Pack Gold-Plated Retractable Aux Cable – 2.5 Feet

Logging

• N3FJP AC Log
• Microsoft Surface Go

Packs/Cases

• GoRuck GR1 USA

Camera and Audio Gear

• DJI OSMO 4 action camera with Sensyne Phone Tripod
• DJI Wireless Microphones

On the Air

Since this was a long activation and I needed to submit electronic logs to HRWBOTA admin (Mark, N6MTS), I skipped paper logging. Instead, I logged directly to AC Log on my Microsoft Surface Go, just as I would during Field Day.

In short, 10 and 12 meters were pretty quiet, but I did work some DX into the UK and Europe (which was my goal). As I moved to 15 activity started picking up.

Activation Video

Here’s my real-time, real-life video of the entire activation.  As with all of my videos, I don’t edit out any parts of the on-air activation time. In addition, I have YouTube monetization turned off, although that doesn’t stop them from inserting ads before and after my videos.

Note that Patreon supporters can watch and even download this video 100% ad-free through Vimeo on my Patreon page:

Click here to view on YouTube.

Part 2 Next Week!

Since I’m pressed for time this morning and want to publish this field report and video today, I’ll save the extensive logs and QSO Map for my next report!

Right now, I’ve got one foot out the door to help our local radio museum set up for our annual Asheville Maker Faire at AB Tech Community College tomorrow!

Thank you

Thank you for joining me for Part 1 of this activation!

I hope you enjoyed the field report and my activation video as much as I enjoyed creating them!

Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon, and the Coffee Fund. While not a requirement, as my content will always be free, I really appreciate the support.

As I mentioned before, the Patreon platform connected to Vimeo makes it possible for me to share videos that are not only 100% ad-free but also downloadable for offline viewing. The Vimeo account also serves as a third backup for my video files.

Thanks for spending part of your day with me! I hope you have an amazing weekend!

Cheers & 72,
Thomas (K4SWL)

PS: Consider joining our QRPer.net discussion board! It’s an active community of radio operators who enjoy helping and supporting each other. It’s also the best place to ask any questions you might have about radios, field activities, antennas, or pretty much anything amateur radio. Click here to join.