Christian Chases Greyline DX on Support Your Parks Weekend!

Many thanks to Christian (IX1CKN) who shares the following field report:


A Breathtaking “Support Your Parks” Weekend in IT-0120

by Christian (IX1CKN)

…Day 1

The goal I had in mind was to take advantage of early morning greyline from a POTA reference, combining the appeal of an activating station with the propagation opportunities at that time of day. In this part of the season it means being active around 3/3:30 UTC, and although I didn’t manage it on day one, Saturday 20th July 2024, I went out much earlier than usual and had a few surprises, confirming the idea’s potential.

I chose IT-0120, the Tsatelet Nature Reserve, my “home reference”, because a short trip is needed to be active quickly. I was happy to go, both curious about how it would turn out and because it was the “Support Your Parks” weekend. If there’s pride in being part of this program, these are the two days to show it. The setup was as usual: Xiegu G90 with a ground-mounted 1/4 wave vertical antenna. Given the lighter battery (I had to walk to the top of the reserve), I lowered the power to 10 watts for a longer duration.

With these thoughts in mind, at 6:44 UTC, I powered up on 20 meters. After a “park to park” with a colleague in Lithuania, which I took as a good omen, I moved to a clear frequency and started calling. The first 2-3 minutes were silent, but then I got a response that changed the day: “…KL7TC.” Alaska, for the third time! Bill in Fairbanks was coming in at 5/7-8 with that unmistakable transpolar signal fluctuation. He gave me a 5/1, and when I told him I was running 10 watts, he congratulated me. I grabbed my phone and filmed part of the QSO, so expect a video. From here on, every QSO was a bonus.

Five minutes later, as the skip started to Europe, KZ4CP, Brandon from Kentucky, answered. He came in strong (another 5/8 from me), and on the second over, he said my signal jumped to 5/8. It was 6:56z, I logged it, filled with gratitude, and moved on, thinking that this project should be realized as soon as possible. From Europe’s perspective, things were slower, but responses continued, albeit at a low rate. I also managed another “park to park,” the second (and last of this activation), with LA7TN. I couldn’t hear the others on the cluster.

Don G0RQL joined in, making it the 10th QSO. The activation was valid. However, I regretted not exploring other bands. After checking and hearing a few decent signals, I switched to 15 meters, calling for five minutes with no luck. Then, I moved to 17 meters: no response to my CQ, but I heard VK3IO, Ron, near Melbourne. It was 7:33z, and although he wasn’t very strong, he was still a solid 5/7. I waited for him to finish his QSO and called. After some persistence, he got my call. The report was 4/3, but even if it were lower, the joy of covering over 16,000 km with 10 watts is incomparable (there will be a video portion for this too).

At this point, it was close to 10 local time (8 UTC). The sun was starting to heat things up (including the G90 chassis, which has a known issue with heat dissipation), but I had one more experiment. The Chinese multiband vertical is designed for 20 to 10 meters, but with a coil I bought earlier, it can do 40 meters too. I added the component, found a clear frequency (7130), and started calling.

I had noticed a couple of times that this solution is a compromise, not very effective. However, it brought in another 5 QSOs: with Piedmont, Tuscany, Lazio, and France. So, it did something and was better than nothing. I wrapped up after 68 minutes of activation with 17 contacts logged. The slow rate indicates conditions aren’t ideal yet, but with Alaska, Kentucky, and Australia (for the first time from a park) in the log, and a breathtaking view of Aosta, there’s no room for complaints. See you next time, and thanks to everyone!

Video – Alaska and Australia:

…Day 2

A thunderstorm hit Aosta at 5 AM. No thunder, just a continuous rumble like an engine, with flashes of lightning every few seconds. Enough to wake me up, though sleep is always welcome (especially on a Sunday). Once it stopped, I didn’t curse the rain but seized the opportunity to get closer to my original project. So here I am, in the car, arriving at IT-0120, the Tsatelet Nature Reserve, at 6:44 local time, 4:44 UTC, on Sunday 21st July 2024, for a POTA activation not exactly at greyline, but still early morning.

Clearly, I couldn’t use Saturday’s setup. The storm had created puddles and stagnant water, making it impossible to set up outside. So, I decided to operate from the car, with the Xiegu G90 remaining the core of the portable shack, but swapping the ground-mounted 1/4 wave vertical antenna for the Outback Falcon HF-1899 on the car roof. Definitely less efficient, but if we wanted to do this today, this is how it had to be done.

Also, I had a less capable battery than the day before, so I lowered the output power to 10 watts to ensure longer operation. As soon as I turned the radio on 20 meters, I was amazed by the number of American accents I heard. I listened to VE3GXT calling CQ POTA from Ontario with a solid signal, but despite my responses, he couldn’t hear me. So, I found a free frequency and started calling. The pace was slow, as seen the day before, but something happened.

First, Joe WB2WKJ replied, explaining that it was his first time “hunting” a park from Italy. However, he only gave me a 3/3 in New Jersey, making it clear that receiving is one thing, and transmitting (and being heard) is another. I kept my spirits up, and soon W3MJB, Mike from Pennsylvania, responded. This time, the report was 5/2, which sounded more in line with a QRP station. The “park to park” call that followed was thrilling.

It took a moment because the signal wasn’t strong, but it came from VK3YV Tony, activating in Victoria, Australia. I got no more than 3/1, but the noteworthy part was that 10 watts and a vertical on a car were reaching the other side of the world (a first for me with POTA). Feeling encouraged, I searched for another activating station from “Down Under,” VK2USH in New South Wales.

Again, I was heard with difficulty (which was to be expected), but we completed the contact, and I felt that even if I didn’t reach 10 QSOs, the activation was worth the day. Before the skip shortened, I heard a station from New Zealand and, out of curiosity, on 15 MHz, the WWVH time signal from Hawaii, which, in a surreal twist, arrived simultaneously with WWV (from Colorado).

You’d expect to hear only one of them (the one from the Pacific) at that time of morning, but there are propagation theories, and then you turn on the radio and hear what actually comes in. The calls continued, and I logged KZ4CP, Brandon from Kentucky, for the second day in a row, and KN4DY Randy from Georgia. From him, I even got a 5/3, the highest signal report of the day from across the Pond.

It was 6:50 UTC, and Europe started responding. The activation, previously an uphill battle, leveled out. Many Spanish friends and other familiar POTA faces enriched the log. When I reached a good 20 contacts, I tried moving to 40 meters. Again, the antenna wasn’t very effective on that band, but I managed about ten contacts, including Belgium, the UK, and Austria.

In the end, I made 31 contacts in 3 hours. The rate remained slow, but today, more than ever, I saw firsthand how greyline phases or signal enhancements on shortwave can hold surprises. Sure, with more power, much more could have been achieved (besides Canada, even KD9VVS Nick activating from Indiana couldn’t hear me). I thought about “only” 100 watts, but there will be time to keep testing. Low power is a philosophy, but it shouldn’t become a dogma, because the beauty of radio is giving meaning to what we do.

Today, no activation pictures to accompany the post (also because IT-0120 has been featured on QRPer a few times now), but a video. Apologies if it’s not strictly about hamradio, but the two signals from Hawaii (the one with the female voice) and Colorado (male voice), rarely received so clearly here, demonstrate better than many examples how shortwaves are made to travel far, how thrilling it is to chase them, and how intense this “Support Your Parks” weekend has been.

Video – Time Signals:

7 thoughts on “Christian Chases Greyline DX on Support Your Parks Weekend!”

  1. So cool Christian! You nailed it! spanning the width of the planet using the grayline, super cool!

    The only way to beat that, would be a CW U/VHF DX EME contact, relayed park to park to the summit of Heard Island, while peeling a banana! (HI HI) Great report Christian!

    72 de W7UDT ID (dit dit)

  2. Not about the post material, but the post itself. My computer flagged this one as potentially dangerous, identified by many as being a phishing scheme. I was unable to access the page until I swore under penalties of perjury and with a drop of my blood on the screen that I was willing to take the chance. I’m glad I did, quite the nice narration of a wonderful outing!

    Thanks 🙂

    1. Huh…no one else has reported this. Do you have any other information or a screenshot you could share with me showing it? QRPer.com is SSL secure, backed-up, and has full malware service. We also pay for CloudFlare protection. Not sure why it would be flagged, so I’d love any more info you might have! 🙂

      1. No, I was so eager to read that I just clicked “Looks OK to me” and proceeded. I tried going back a couple pages in my history, but it’s apparently “once clicked, always safe”. I can’t tell you if it’s Firefox, my ISP (Frontier Fiber 500), or my computer (Win11 HP). Wish I had thought to do a shot but it never crossed my mind. I say all’s well that ends well (famous quote?) but others may get soured on this site and refuse to view anything. Sorry, Thomas, I failed in my duty to document.

        1. No worries at all, Ken! If it does it again, and you think about it in time, do a screen capture so I can see what the issue might be. 🙂

      2. The same thing happened to me. Signed away my firstborn and got into the side. Also, I was not able to get back to the original to capture a screenshot. Computer here is Win10 HP Envy using Google Chrome and AT&T internet.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.