Scott’s “Fun Harbour-Side POTA”

Many thanks to Scott (VA3EKR) who shares the following field report:


Apr. 15, 2024, Great Lakes Waterfront Trail Recreation Site (CA-6003)

by Scott (VA3EKR)

Decided to try the other side of the harbour for the activation, in Tannery Park.

For the setup, I picked a picnic table on the north side of Walker Street, as there were larger trees there.

This is the view of the harbour from the picnic table.

The bands were misbehaving, and interestingly, I have never experienced listening to the band go very quiet suddenly, due to the solar flare and the R1 radio blackout that resulted.

I used the trusty QRP-Guys random-wire antenna with 9:1 matching transformer.

Here is a map of the QSOs. The longest distance was to the Czech Republic, 6,970km away. I also pleased at getting some California QSOs, especially using only 10 watts. Three park-to-park QSOs. Orange markers indicate 20m, Turquoise represents 15m, and Red is 17m.

Screenshot

After the activation, I scouted the other side of the park. This is a fairly newly-renovated park, and so I was interested in seeing what they had done with it.

I met a new friend, Pierre, who is retired from IBM, and is very into astronomy. He showed me a very nice image of the sun with sun-spots. He even has a virtual-reality display that allows you to see the images! This was nice, as my recent viewing of the solar eclipse was a complete wash-out.

The Bronte Astronomy Group has public viewings, so I will have to monitor the Facebook page and go out some time to see some nice astronomy images!

The last thing I noticed is that the sculpture they put up, is rusty and tall.

I am hoping that next time I can bring an alligator-clip, a small counterpoise wire, and I can attempt to tune up this and use it as an absurd but fun antenna!

3 thoughts on “Scott’s “Fun Harbour-Side POTA””

  1. I don’t know for sure, but based on the appearance of the sculpture my guess is that it is made of COR-TEN steel. If that’s the case you probably wouldn’t be able to get a good electrical contact through the weathered surface.
    But it sure would be interesting to try! I wonder if there would be a way to couple into it with a big capacitor plate?

    1. I used a C-clamp and my rig expert have me a uniformly-bad 10+ SWR, so your prediction was sound, though I can’t speak knowledgeably about the material.
      Worth a shot though

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.