Many thanks to Micah (N4MJL) who shares the following guest post:

Elecraft KH1 Anytime and Anywhere Adventures

by Micah (N4MJL)

Anywhere and anytime—that’s how I like to describe my Elecraft KH1. This radio goes everywhere I go. As an airline pilot, I bounce from coast to coast and everywhere in between almost daily. Since I’m constantly on the move, my radio gear has to be small and compact.

I’m a third-generation ham radio CW operator. Anyone who’s heard me on the air knows I’m still quite new to CW. I only started running CW activations with POTA/SOTA in the spring of 2024. Here’s the gear that’s been working well for me, along with a few photos from the locations I’ve had the pleasure of activating.

I’ve found that the Pelican M50 micro case is the perfect “shack in a box” for my KH1. This setup goes everywhere with me. Here’s what fits perfectly in the M50:

Packtenna 9:1 random wire
20 ft BNC coax
Panasonic ErgoFit earbuds
SP4 paddles from CW Morse
KH1 (fully loaded with internal battery and tuner)
30 ft throw line
Write-in-the-Rain notebook
High Visibility Orange Cap-O-Matic Fisher Space Pen (with lanyard)
Desiccant silica gel pack

In pedestrian mobile configuration, the KH1 is a solid system. I’ve done several activations this way. That said, after 45 minutes of holding the KH1 in this setup, I’m ready to wrap up! Having a portable shack that lets me deploy a random wire that tunes 40-15m and a more ergonomically designed key drastically improves my capabilities.

In many urban environments where I activate POTA, pedestrian mobile is essential. Unfortunately, the security in urban parks can be unpredictable, and the KH1 allows me to operate on the go and quickly move if needed.

Some of you may be wondering what I did to the inside of my M50 case. Well, in my defense, it’s my wife’s fault. She left me unsupervised with a glue gun and a bit of alcohol. When my KH1 arrived this spring, solar conditions were poor, so I had a few days to think and decided to turn the case into a makeshift Faraday box. I used Polyken aluminum tape, cardboard, and a glue gun to line it. Now, I know what you’re thinking: there’s no electrical bonding between the lid and lower box due to the rubber seal, so will this really work as a Faraday cage? Maybe, maybe not—but it sure looks cool! What do you think?

In addition to the M50 case, I carry a support pouch (Magpul DAKA, size small). This heavy-duty, water-resistant pouch contains:

31 ft counterpoise wire
AXE1 40m antenna extender
Bioenno battery 12V 3Ah (backup battery—“1 is none, and 2 is 1” if you know, you know!)
KH1 power cable
KH1 right-angle antenna mount

These items aren’t essential but are nice to have for longer activations.

When I’m done flying and ready to play radio, I pack all this gear into my Flash 22 day pack. This compact, minimalist pack takes up almost no room in my flight bag and even has a built-in whistle on the chest strap, which is perfect for California!

When conditions allow, I enjoy using the full five watts of power. My go-to antenna is the SOTAbeams Band Hopper III, which is a versatile half-wave linked dipole:

Rated 125 watts
Center-fed with 33 ft RG174 coax
Guying system included
Resonant on 20m, 30m, and 40m (no tuner needed, though the KH1 tuner will also tune up 17m and 15m)
Built-in balun
Weighs only 14 oz

The wire/guying winders are excellent, and I’ve used this system in all kinds of environments, from sandy beaches to mountain tops above the treeline. I replaced the aluminum tent pegs with plastic ones to keep TSA happier.

The SOTAbeams Tactical Mini Mast fits diagonally in my 22″ roller board. I wrap heavy rubber-coated wire around it to secure it to posts or shrubs when needed.

Along with this radio gear, I also manage to pack a change of clothes—usually enough for a five-day trip. I typically fly three trips a month, each lasting four to five days. My roller board carries me and my radio gear from plane to plane all week long.

On a short backpacking trip along the Appalachian Trail (June 3, 2024), I activated SOTA summit W4V/BR-007 Three Ridges and the Three Ridges Wilderness area (POTA US-9959). The mountain in the distance is The Priest (W4V/BR-002), which I activated earlier this year with my LNR Precision MTR4B.

The summit of Three Ridges is a densely wooded area, so I stopped below the summit to enjoy the view, grab a quick snack, and play some radio. I snagged two POTA-only QSOs with W8WZ in Louisiana and KU8T in Indiana using the KH1’s whip antenna. Once I reached the summit, I used the Packtenna 9:1 random wire for my activation. Continue reading Flying High and Keying Low: A Pilot’s QRP Adventures Across the USA →

Why a watertight case?

This Pelican 1060 case houses a complete Mountain Topper MTR-3B field kit including a throw line and throw weight.

I like to have a watertight case option for pretty much any QRP radio I take on SOTA (Summits On The Air) activations.

It’s reassuring to know that if I stumble and fall on my pack, the case will prevent me from crushing the radio. In addition, a good case keeps my radio dry if I get caught in heavy rains or (even more likely) slip on a rock and fall in a river/creek. In fact, many of these watertight cases will float with the KH1 inside so if it goes overboard while kayak mobile, it’ll be easy to retrieve. (For the record: I don’t want to test this theory.)

With one exception, all of the cases I explore here cost somewhere between $25-$40. I consider this cheap insurance for a $500-1100 radio.

My requirements

I searched a few manufacturer’s websites and tried to find interior dimensions that would accommodate the KH1 and all protrusions: 1.4”H x 2.4”W x 5.6”L (3.5×6.1x14cm).

I primarily searched two watertight case manufactures: Pelican and Nanuk. I trust products from both of these companies and both offer compact watertight cases. There are more manufacturers out there, but but both of these companies offer quality products. Pelican cases are even made here in the USA. Many Nanuk models are made in Canada, but not their Nano series included here.

In the end, I was searching for two case sizes:

A compact case to only hold the KH1 “Edgewood” package: the KH1 with paddle attached, Cover/Logging Tray, Whip Antenna, and 13′ Counterpoise. There also needed to be enough room for a pair of earphones.

A slightly larger case that would accommodate the KH1 “Edgewood” package along with earphones, a throw line, throw weight (or rock sack), and a simple random wire antenna.

The idea with the second, slightly larger, case is that it would give me the option to use a wire antenna during an activation and would be fully self-contained (meaning, everything needed for the activation included).

The contenders

I took a total of eight cases to a local park and spread them out on a picnic table for this test. This made the process of comparing the cases quite easy. I actually made a video of this whole process–you’ll find the video further below in this post.

Here are the cases I tested in the order you find them in the video (any Amazon links here are affiliate and support QRPer.com):

Hint: many of these cases are available in multiple colors–prices can vary greatly based on the color. A red case might cost as must as 30% less than a black case, for example. Always check the pricing of color options, but make sure you don’t accidentally select a different size case in the process (this is easy to do).