Because I receive so many tips from readers here on QRPer, I wanted way to share them in a concise newsletter format. To that end, welcome to QRPer Notes, a collection of links to interesting stories and tips making waves in the world of radio!

NG2E activates 7 summits on one December day

Many thanks to Jack (NG2E) who shares this Storymap post outlining his effort to activate seven summits in one day.

Jack notes:

[…]My plan was to activate four primary peaks along the Skyline Drive. I then planned to skip over two peaks–Stony Man and Hawksbill Mtn–as I’ve previously activated these peaks. Once activating Hazeltop Mtn farther to the south, I planned to backtrack and pick up the bonus points only for Hawksbill and Stony Mtn if I had enough time and energy.[…]

Click here to view his activation map and narrative on Storymaps.

5 Watts SSB on the Beach in Kauai, Hawaii (K4OGO)

Many thanks to Tommy (N4KBM) who shares this video of K4OGO making his first QRP SSB contact on a beach in Hawaii:

Icom IC-705 Firmware upgrade

Many thanks to Markku Koskinen who writes:

New software available from Icom.

ST-4003W | Firmware / Software | Support | Icom Inc. (icomjapan.com)

The ST-4003W is Windows software, which allows you to set the radio’s time from your PC’s time by connecting the radio to the PC.

Compatible radios (as of November 2021)
IC-705
IC-7100
IC-7300
IC-7600
IC-7610
IC-7850/IC-7851
IC-9700

Use a USB cable to connect the radio to your PC.

The USB port type differs depending on the radio, so please check the radio’s port type before preparing the cable.

Before downloading this software, please thoroughly read the “ST-4003W INSTRUCTIONS” for installation details and what is required for the installation.