Tag Archives: AM Broadcaster Interference

Xiegu X6100: Two effective ways of mitigating broadcast band interference and overloading

As I’ve previously mentioned, the Xiegu X6100–at least at time of posting (January 17, 2022)–has overloading issues. If you listened to the activation video I posted yesterday, you can hear a local AM broadcaster punching through the 40 meter band, especially noticeable before/after operating SSB.

Several subscribers asked if I tried using the attenuator and RF gain to mitigate the level of overloading.  Attenuators and RF gain can be an effective means of mitigating noise levels, but they essentially affect everything on the band–all signals somewhat equally.

A better approach is to use a BCI Filter.

BCI Filters

BCI filters reduce or notch out AM broadcast band signals so that they don’t overload your receiver.

BCI Filters are placed between the radio and the antenna. They can have a dramatically positive effect if you live near a broadcast station and/or if you have a radio that’s prone to overloading.

I see them as a more “surgical” approach to solving broadcast band interference.

BCI filters are simple, inexpensive, and effective. Here are two options shared by QRPer readers: Continue reading Xiegu X6100: Two effective ways of mitigating broadcast band interference and overloading