Friday, February 28, 2025, felt like another “rinse and repeat” day—a pattern I’ve grown used to over the past few weeks.

That morning, I woke up early, published a post on QRPer.com, and by 7:30 AM I was outside with my chainsaw, preparing piles of tree debris for the skid steer operator we hired to move it to the roadside.

As you might imagine, he can collect debris much faster than I can cut and prepare it, so my goal has been to stay ahead of him. I worked steadily all morning and, combined with what I had cut the previous day, managed to prepare enough to keep him busy for the rest of the day. That was fortunate because I needed to help my daughters with activities in town all afternoon.

Finding POTA time

I’ll be honest—after grabbing a quick lunch and a shower, I was pretty worn out. Part of me wanted to use any spare time to sneak in a nap. But I also knew I could use a little POTA therapy, and the weather was unseasonably gorgeous—almost spring-like.

Looking at my schedule, I realized I had about an hour to spare, enough time to detour and activate Pisgah National Forest (US-4510) at the Sycamore Flats Picnic Area. It was the most convenient spot along my route that afternoon.

As for radio gear, I already had my Elecraft K1 packed from an earlier activation that week (which I also recorded and will post soon—obviously, out of chronological order!).

For variety, I didn’t want to use the same antenna as the previous activation. Instead, I grabbed one of my favorite compact antennas to see how well it would pair with the K1: the Elecraft AX1.

If you’ve followed QRPer for long, you’ll know I often use the AX1 during both POTA and SOTA activations. Despite its extreme size compromise, it has always performed well for me.

Loaded verticals like the AX1 typically have a high Q (narrow bandwidth) and benefit from an ATU or capacity hat to help with impedance matching. Luckily, my new-to-me Elecraft K1 has the optional built-in ATU, meaning I could attach the AX1 directly to the back of the radio.

I’ll save the full story of how I acquired this particular K1 for my next field report, but let’s just say I’d been hunting one for a long time—and this one showed up locally. It’s a four-band version (40, 30, 20, and 15 meters) with both the ATU and internal AA battery pack options.

Sycamore Flats Picnic Area

I arrived on site around 13:35 local time and had about 45 minutes to play radio.

I started the activation video and walked through the picnic area until I found a good table. Truthfully, though, the beauty of using the AX1 is that almost any flat surface will do—it’s that low-profile and low-impact.

Once I found a table, setup was super quick: I placed the K1 on the table, connected a battery, attached my Palm Mini paddle (its maiden POTA voyage!), and plugged the AX1 directly into the back of the radio. I wasn’t in a hurry–and it truly shows in the video–but I’m confident I could have deployed the entire station in about 60-90 seconds if required. That’s the magic of the AX1—minimal setup time.

With everything connected, it was time to hit the airwaves!

Gear

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

Radio

• Elecraft K1 (four band version with optional ATU and internal AA battery pack)

Key

• Palm Mini Paddle with new connection cord

Antenna

• Elecraft AX1with 3D-printed Bipod (clip and knob by K6ARK and  bipod legs by KE8PTX)

Pack and Case

• NEMO Resolve 25L Backpack
• Ape Case Padded Camera Insert

Logging Supplies

• KOH-I-NOOR 5219 2mm Lead Holder Pencil
• Rite In The Rain Top Spiral Notebook

Battery

• Bioenno 3 Ah LiFePo Battery (Model BLF-1203AB)

Camera/Audio Gear

• DJI OSMO 4 action camera with Joby Telepod Sport Tripod
• DJI Wireless Microphones

On The Air

Once on the air, I was thrilled to have no problem collecting hunters for the logs.

I started on 15 meters and worked eight hunters in about nine minutes.

When activity on 15 meters slowed, I switched to 20 meters and worked an additional seven contacts in five minutes.

Unfortunately, I was out of time, but I was pleased to log a total of 15 contacts within an 18-minute window—including the band change!

A big thank-you to all of the hunters who chased me.

QSO Map

Here’s what this five-watt activation looked like when plotted out on a QSO Map. Click on the map image to enlarge.

Activation Video

Here’s my real-time, real-life video of the entire activation.  As with all of my videos, I don’t edit out any parts of the on-air activation time. In addition, I have YouTube monetization turned off, although that doesn’t stop them from inserting ads before and after my videos.

Note that Patreon supporters can watch and even download this video 100% ad-free through Vimeo on my Patreon page:

Click here to view on YouTube.

Loving the K1/AX1 pairing

This activation was exactly the bit of POTA therapy I needed that day.

The K1/AX1 pairing worked beautifully, and it was—as always—a blast to log contacts with such a simple, compact station.

The K1 is a deceptively small rig. Despite its compact size, it delivers excellent audio and superb receiver performance.

Again, I’ll share more about how I acquired this K1 in my next (slightly out-of-order) field report.

Thank you

Thank you for coming along with me on this fun little activation!

I hope you enjoyed the field report and my activation video as much as I enjoyed creating them!

Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon, and the Coffee Fund. While not a requirement, as my content will always be free, I really appreciate the support.

As I mentioned before, the Patreon platform connected to Vimeo makes it possible for me to share videos that are not only 100% ad-free but also downloadable for offline viewing. The Vimeo account also serves as a third backup for my video files.

Thanks for spending part of your day with me! Have a brilliant weekend!

Cheers & 72,
Thomas (K4SWL)

PS: Consider joining our QRPer.net discussion board! It’s an active community of radio operators who enjoy helping and supporting each other. It’s also the best place to ask any questions you might have about radios, field activities, antennas, or pretty much anything amateur radio. Click here to join.