Well before I actually had a KH1 in hand, I noted the dimensions of the radio from the preliminary spec sheet and started exploring the world of compact, watertight cases.

Why a watertight case?

This Pelican 1060 case houses a complete Mountain Topper MTR-3B field kit including a throw line and throw weight.

I like to have a watertight case option for pretty much any QRP radio I take on SOTA (Summits On The Air) activations.

It’s reassuring to know that if I stumble and fall on my pack, the case will prevent me from crushing the radio. In addition, a good case keeps my radio dry if I get caught in heavy rains or (even more likely) slip on a rock and fall in a river/creek. In fact, many of these watertight cases will float with the KH1 inside so if it goes overboard while kayak mobile, it’ll be easy to retrieve. (For the record: I don’t want to test this theory.)

With one exception, all of the cases I explore here cost somewhere between $25-$40. I consider this cheap insurance for a $500-1100 radio.

My requirements

I searched a few manufacturer’s websites and tried to find interior dimensions that would accommodate the KH1 and all protrusions: 1.4”H x 2.4”W x 5.6”L (3.5×6.1x14cm).

I primarily searched two watertight case manufactures: Pelican and Nanuk. I trust products from both of these companies and both offer compact watertight cases. There are more manufacturers out there, but but both of these companies offer quality products. Pelican cases are even made here in the USA. Many Nanuk models are made in Canada, but not their Nano series included here.

In the end, I was searching for two case sizes:

A compact case to only hold the KH1 “Edgewood” package: the KH1 with paddle attached, Cover/Logging Tray, Whip Antenna, and 13′ Counterpoise. There also needed to be enough room for a pair of earphones.
A slightly larger case that would accommodate the KH1 “Edgewood” package along with earphones, a throw line, throw weight (or rock sack), and a simple random wire antenna.

The idea with the second, slightly larger, case is that it would give me the option to use a wire antenna during an activation and would be fully self-contained (meaning, everything needed for the activation included).

The contenders

I took a total of eight cases to a local park and spread them out on a picnic table for this test. This made the process of comparing the cases quite easy. I actually made a video of this whole process–you’ll find the video further below in this post.

Here are the cases I tested in the order you find them in the video (any Amazon links here are affiliate and support QRPer.com):

Hint: many of these cases are available in multiple colors–prices can vary greatly based on the color. A red case might cost as must as 30% less than a black case, for example. Always check the pricing of color options, but make sure you don’t accidentally select a different size case in the process (this is easy to do).

Again, you’ll see a lot of detail in the video below, but let’s look at each of these cases with my notes: Continue reading Seal the Deal: Exploring the Best Watertight Cases for the Elecraft KH1 →