As many of you know, I’m proud to be a regular on the Ham Radio Workbench podcast.
Last week, we published an episode focused on emergency communications, specifically my first-hand experiences in the aftermath of Hurricane Helene.
When we recorded, our road was still without power, and we had no mobile data service. I was able to join the recording thanks to a high(ish)-speed internet connection via HughesNet and our whole-house solar power backup.
HRWB podcast episodes are long-format, allowing us to dive deeply into topics like this one. If you’re interested in listening, I encourage you to check it out on the HRWB website and even subscribe via iTunes, Android, and other platforms.
The next episode will also cover emergency communications, focusing on the question, “How would you plan for the next emergency?” It’s a roundtable discussion including Josh (K7OSH). It’ll appear here when published (likely, later this week).
I’d also add that joining my friends on the HRWB podcast recording was truly good for the soul. At that point, we were still in the early stages of cleanup after the disaster, and spending time with them in real-time was incredibly therapeutic.
This morning, Ron (W6AZ), sent me a link to a Ham Radio Crash Course live stream where Josh (KI6NAZ) interviewed my good friend George (KJ6VU) about his proposal for a new Adventure Radio Protocol.
We covered the Adventure Radio Protocol in Ham Radio Workbench episode 191 and I think it’s a brilliant step forward to make emergency communications via VHF/UHF portable radios easier, clearer and attract more attention. It also leverages CTCSS tones which are a standard feature even on the least expensive HTs on the market (and has been for decades).
George explains, in detail, what the protocol is and how it works on his dedicated website AdventureRadio.info. Here’s an excerpt from the front page:
Adventure Radio Protocol
By George Zafiropoulos KJ6VU The Adventure Radio Protocol provides a common radio frequency and signaling standard to make it easier for radio operators in the field to find and communicate with each other. The signaling protocol that uses CTCSS sub audible tones allows operators to signal the type of traffic on the adventure radio frequency and enable 24/7 monitoring without the need to listen to all traffic on the channel.
ADVENTURE RADIO FREQUENCY – 146.580 MHz
We propose to use 146.580 MHz FM for the nationwide US adventure radio frequency. This frequency is chosen because it is already in use in various regions of the US for hiking, backpacking, SOTA, overlanding and other outdoors activities. We also want to avoid using 146.520 to remove outdoor activity traffic from the national calling frequency.
CTCSS TONES
CTCSS sub-audible tones are used to signal the type of traffic on the adventure radio frequency. The following CTCSS tones are assigned for various types of traffic. The Adventure Radio Protocol reserves all CTCSS tones between 67.0 Hz and 151.4 Hz to be assigned over time for various purposes. Radio operators can use any CTCSS frequency above 151.4 Hz for any purpose and are not governed by the AR protocol.
67.0 Hz Emergency calling.
77.0 Hz Ping – Keying up will cause any automated monitoring station to respond to let you know there is a system on the air.
88.5 Hz SOTA/POTA and other operating events.
100.0 HZ General backcountry conversations.
123.0 Hz Trigger automated messaging from local repeaters.
I highly encourage you to check out the Adventure Radio Protocol and make your local club aware that it’s coming down the pipeline as this functionality will need to be added to repeater controllers to broaden the reach.
This protocol has the potential to make emergency communications via handheld VHF/UHF radios so much more effective and automated than it is today!
QRP radios, product announcements, reviews, news and more. Low power amateur radio fun!
Please support QRPer by adding us to your whitelist in your ad blocker. Ads are what helps us stay online. All of our ads are ham radio related--no junk, we promise! Thank you!
