And now, what we’ve all been waiting for: the Ten-Tec Argonaut VI has finally hit the market. Manufacturer Ten-Tec has already begun shipping the new units–I hear they’ve already sold out the first production run. For the past two months, I have had the pleasure of beta-testing this newest QRP transceiver, and I’m ready to share my findings. [Do please note that, other than beta-testing, I have no relationship with Ten-Tec.]

The Ten-Tec Model 539, A.K.A. Argonaut VI

I authored a post about the Model 539 when Ten-Tec first disclosed it at their 2011 Hamfest. The reactions and questions from readers came flooding in–so many, in fact, that I invited readers to send in those questions to share with the engineers at Ten-Tec. I presented these to the company, and posted Ten-Tec’s helpful responses.

Prototype of the Ten-Tec Model 539 QRP transceiver from the 2011 Ten-Tec Hamfest. Note that the speaker no longer has an externally mounted grill.

In truth, I don’t think that Ten-Tec was quite prepared for all of the interest in their modest QRP transceiver. But it was no surprise to me: I’ve always been a fan of Ten-Tec, and although I’ve not been as excited by the QRP offerings since the early Argonauts, I knew I wasn’t alone in my appreciation of this US-based radio company’s quality products.

The following review is not a test-bench review–it is, rather, a consideration of the usability, ergonomics, design, basic performance and, well, fun factor of the new Argonaut VI. It’s only fair to note that I don’t review transceivers often; rather, I focus primarily on receiver reviews at my alternate radio blog. But I could not resist the opportunity to investigate the newest in this venerable line of transceivers.

Size-wise, the Argonaut VI is smaller than the Elecraft K2 in every dimension.

You will note that I compare the Argonaut VI to the Elecraft K2 a number of times. Why? In my opinion, the K2 is the Argonaut VI’s closest competitor. It, too, is a front-panel QRP transceiver not for general coverage. While there are a number of differences, of course, I nonetheless feel the K2 is a closer match than the new Elecraft KX3, the Yaesu FT-817, or the Icom IC-703. Plus, I have a K2 that I already know and love here in my shack, so by default it has been my point of comparison throughout the beta-testing period.

Argonaut VI: first impressions

The Argonaut VI is an attractive, simple, sturdy little radio. It reminds me a great deal of the Ten-Tec Scout outfitted with its simple front panel. The front features two knobs: one controls the AF gain, while its outer ring controls RF gain; the other controls the bandwidth, while its outer ring controls the pass band. There is also an appropriately-sized display panel, quality tuning knob (see below), four multi-function buttons, and a three-position toggle switch.

The TMB switch is a simple and effective way of giving the Argo VI's four function buttons multiple assignments. — The TMB switch is a simple and effective way of giving the Argo VI’s four function buttons multiple assignments.

A toggle switch? I can’t think of a recent front-panel radio in production that has had a proper mechanical toggle switch. On the Argo VI, this makes for a simple method to give the four function buttons a total of three one-push functions, each, for a total of twelve functions. Ten-Tec refers to this switch as the “TMB” (i.e., “Top-Middle-Bottom”) switch.

Size-wise, the Argonaut VI is smaller in every dimension than the K2 (see photos). Its physical dimensions are 2.25″H x 6.5″W x 7.6″D, less the knobs and connectors. It weighs a mere 3.6 lbs, and feels very light in my hands. The Argo VI has a sturdy Ten-Tec bail that snaps into the perfect position for tabletop operations. The display is crisp and clear, and actually contains a lot of information:

The Argonaut VI display is compact, yet crisp, clear and displays all important information.

Frequency
2nd VFO frequency
Mode
AGC speed
S Meter/SWR
Output power
Pre-amp

The display can be switched (via an internal setting) to blue (default), green, or red. One nice touch: the dot in the Ten-Tec logo is actually a red LED that lights up on transmit and ALC peaks.

Tuning knob

Perhaps I place more emphasis on a tuning knob that other hams. I liken it to shutting the door on a quality car: you want the door to shut solidly and feel substantial. But it may be more like a car’s steering wheel–after all, the tuning knob is how one interacts with the radio.

To me, the tuning knob is often a measure of a radio’s overall quality, in my humble opinion. As for the Argonaut VI? Here’s the answer: I was so impressed with the tuning knob on the Argonaut VI that I actually confirmed with Ten-Tec that the beta-unit’s tuning knob would also be used on production models. In short, the Argo VI’s tuning knob is heavy, perfectly-sized, has a light tactile grip, and is silky-smooth to operate.

There is no play whatsoever in the action. I like the adaptive tuning, too–when you tune slowly, you’re changing the frequency by hundredths of a kHz; spin the knob quickly and you’ve just shot across the band. After tuning the Argo VI for a bit, other small radios’ tuning knobs begin to feel cheap. Continue reading A review of Ten-Tec’s Argonaut VI QRP transceiver, Model 539 →