I’ve had a production unit of the Xiegu X6200 since June of this year and have made several field reports using it for both SSB and CW.

You may have noticed, though, that I haven’t used it much in the field since June.

The reason? I’m primarily a CW operator, and the original firmware had some frustrating CW keyer timing issues.

These keying issues are most noticeable when operating in iambic mode, especially when trying to form letters like C, R, or K by squeezing the paddles. Often, when I try to send a “C,” as in “CQ,” the keyer produces a “B” instead. If you’ve watched any of my previous X6200 videos, you might have seen this happen a few times.

After some time using the radio, I can adapt and reduce the miskeying, but it still happens occasionally. I suspect part of the issue is related to the keyer timing in relation to the transmit/receive switching.

While these keyer issues aren’t severe enough to prevent me from completing an activation, they are certainly annoying.

As I’m reviewing the X6200 (thanks to Radioddity for the extended loan!), I reported the issue to Xiegu back in May and hoped the first firmware update would address it.

The first firmware update, Version 1.0.1, was released in early August. There was an earlier release, but it was retracted due to other issues.

I checked the release notes and didn’t see anything specific about CW keyer timing in the long list of fixes. I had hoped another update would follow soon, but none has been issued yet. Meanwhile, several readers and subscribers have asked me if the keyer issue was resolved.

I decided to update the firmware and take the X6200 out for another field test.

If you follow QRPer.com daily, you may have already seen the spoiler alert: unfortunately, the keyer timing issue was not fixed in this release.

Still, I had a great time squeezing in a quick activation with the X6200, and I thought I’d share the video and a mini field report with you now!

Pisgah National Forest (US-4510)

My wife and I were out while one of our daughters was in Shakespeare rehearsals in Mills River, NC on Friday September 6, 2024. We had a number of errands to run, but my wife kindly worked with me to carve out 30 minutes for a quick activation.

The most convenient POTA location was the Sycamore Flats Picnic Area in Pisgah National Forest.

By mid-afternoon, the park was busy, but most of the picnic areas were open, giving me plenty of options for setting up.

With limited time, I turned on the camera to start my real-time, real-life activation video and got straight to work.

Since the X6200 has a built-in ATU, I decided to use my PackTenna End-Fed Random Wire, as it’s quick to deploy with its 31’ long radiator—any nearby tree would do.

Next, I paired the X6200 with my BaMaKeY TP-III, plugged in the antenna, and found a spot on the band to start operating!

Time to POTA!

Gear

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

• Transceiver:
  • Xiegu X6200 via Radioddity (Save 5% off purchase amount when you shop with our affiliate link) and via Amazon.com
• Key:
  • BaMaKeY TP-III Ultra-Compact Twin Paddle and Senrog Bench Block TP-III base
  • Key cable: Cable Matters 2-Pack Gold-Plated Retractable Aux Cable – 2.5 Feet
  • Tufteln TP-III Magnetic Cover
• Antenna system:
  • Packtenna 9:1 UNUN Random Wire Antenna
  • ABR Industries 25’ RG-316 cable assembly with three in-line ferrites (Use Coupon Code ABR10QRPER for 10% Discount!)
    
• Other accessories:
  • GoRuck GR1 USA
  • Weaver arborist throw line/weight and storage bag
  • GraphGear 0.9mm 1000 Automatic Drafting Pencil
  • Rite In The Rain Top Spiral Notebook
• Camera:
  • DJI OSMO 4 action camera with Joby Telepod Sport Tripod

On The Air

After tuning up on the 20-meter band, I spotted myself and started calling CQ POTA. Fortunately, hunters quickly responded.

In just twelve minutes, I logged thirteen contacts. Thanks to all the hunters!

My activation was brief, and I was so focused on making contacts and packing up that I forgot to take any photos of the radio in action. I’ve included some screen captures from the video instead.

I did manage to take photos of the logs:

QSO Map

Here’s what this five-watt activation looked like when plotted out on a QSO Map:

Activation Video

Here’s my real-time, real-life video of the entire activation.  As with all of my videos, I don’t edit out any parts of the on-air activation time. In addition, I have monetization turned off on YouTube, although that doesn’t stop them from inserting ads before and after my videos.

Note that Patreon supporters can watch and even download this video 100% ad-free through Vimeo on my Patreon page:

Click here to view on YouTube.

CW Keyer Timing

As I discovered during this activation, the CW keyer timing issue has not yet been addressed in the firmware update.

After returning home, I made some notes and reached out to Xiegu to confirm that the CW keyer timing is still on their radar. They assured me that it will be addressed in the next firmware update. I’ll definitely test it and let you know once it’s resolved, so stay tuned!

If you’ve already purchased an X6200, I’d love to hear your thoughts about this all-in-one radio in the comments!

Thank you

Thank you for joining me during this short activation!

I hope you enjoyed the field report and my activation video as much as I enjoyed creating them!

Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon, and the Coffee Fund. While not a requirement, as my content will always be free, I really appreciate the support.

As I mentioned before, the Patreon platform connected to Vimeo makes it possible for me to share videos that are not only 100% ad-free but also downloadable for offline viewing. The Vimeo account also serves as a third backup for my video files.

Thanks for spending part of your day with me! Have a brilliant weekend!

Cheers & 72,
Thomas (K4SWL)