by Teri (KO4WFP)

After an interesting and successful activation at Fort McAllister, I turned my sights southward and further back in time to Fort Morris Historic Site (US-3717).

Fort Morris Historic Site contains earthen fortifications that date back to the Revolutionary War. The site is simpler than that of Fort McAllister. Fort Morris was built to protect the town of Sunbury. Sunbury was a thriving, cosmopolitan community on the Medway River. In fact, three signers of the Declaration of Independence came from Sunbury. The river has a naturally deep channel that allowed the town to compete with the city of Savannah for commerce.

Fort Morris was attacked by the British in late 1778 and told to surrender. Colonel John McIntosh told the British, “Come and take it.” The British left but returned later with reinforcements and did take the fort, renaming it Fort George.

The capture of Fort Morris was the beginning of the decline of Sunbury. The British burned the town after its capture. Sunbury lost economic significance, suffered from hurricanes in 1804 and 1824 as well as yellow fever and malaria epidemics, and was abandoned by 1860. There are no remaining ruins of the historic town except for a cemetery in which many of the tombstones were destroyed by the 1870s.

I arrived at Fort Morris early, September 2nd, on an overcast day. The trees next to and over the entrance road formed a welcoming green canopy. I left Daisy at home as I planned to walk through the small museum on site and dogs are not allowed inside. What I didn’t know is that the museum is only open Friday through Sunday.

I had the site to myself nearly my entire visit. I walked to the fort first to see if I would be allowed on top of the embankments. Nope! So I walked out of and to the right of the fort along a path that runs around the entire structure. The path is dotted with live oaks whose Spanish moss flitted in the nonstop breeze.

These trees were perfect for the Tufteln EFRW I so often use. I wanted to run my antenna northeast which would put it on the path I walked to get to this spot. In short order, the antenna was installed and I added some more flagging tape for visibility.

I first thought to set up at the sole picnic table behind the fort. (How convenient for an activation!) But, on second thought, that would put my back to the path and, though I’d have a lovely view of the Medway River, I would not be able to watch for pedestrians who might walk into my antenna. Instead, I set up my Helinox chair on the opposite side of the path. This way I could still view the river but also look up and down the path.

The bands were kind to me today. I began with 40 meters and had two callers, both from Georgia, on that band. I moved to 20 meters where the bulk of my QSOs happened – 29 in total! I also logged one QSO on 15 meters and six QSOs on 17 meters, though none of those were DX as I had hoped for.  All in all, I was pleased with this activation.

This activation was also my second using an app on my iPhone for logging – Ham2K PoLo. What I like about Ham2K PoLo is that it is easy to use and the name and location of the op remains on the screen while you are logging the QSO. The app provides a way for me to compare the QTH in the record to the one I copy. It also allows me to thank ops by name at the end of the QSO which I have always liked to do but stopped doing when I used paper unless I could recall the name associated with the callsign.

There are a few downsides from my perspective on using the app. First of all, I cannot type the callsign as fast I could write it. But that is because I haven’t become accustomed to using the app yet. Also, if I hear a partial call during a pile-up, I can’t note it unless I write it on a piece of paper.  Lastly, when I hunt other activators, I like to write down their information since the POTA app moves everyone’s information on the screen as it updates spots. To get around this difficulty, I started taking a screenshot of an activator’s information and saved it to my photos so I could enter the information in PoLo at my leisure while I hunted the activator.

An interesting sidenote – After I wrote this article, I put together a video of the activation itself which I usually don’t do. I found two busted call signs which is not typical for me. I think there are four reasons for what happened.

First, I am still becoming accustomed to using the new app and that is a distraction while trying to copy information in the QSO. Second, I relied on the app to confirm the QTH. In both instances where I copied the call sign incorrectly, the incorrect call sign also had the same QTH so it didn’t help me in those situations. Third, I need to brush up on my Instant Character Recognition. Last but not least, instead of confirming the callsign at the end of the QSO, I used the op’s name after “TU” since I had it available from the app. I think thanking someone by name is a nice touch; however, many ops who hunt POTA are probably not conversant with conversational CW and may therefore not recognize their name in CW.

To avoid a repeat of what happened, I’ll make several changes. First, I will return to pencil and paper. Sure, having the data logged in the app saves me time; however, my activations have maybe 40 or so QSOs at the most which doesn’t take much time to enter back home. Second, at the end of my QSOs, I will return to using the callsign behind “TU” and only include the op’s name if I remember it. Third, I need more work with Instant Character Recognition – both working with the Word List Trainer tool but, more importantly, spending more time in on-the-air QSOs, especially those using conversational CW. I’ve had less in the way of code buddy QSOs over the summer due to propagation and busy schedules. That changes this month as I resume regular QSOs with two code buddies – Caryn KD2GUT and Gary K4IIG.

So there you have it – my activation at Fort Morris Historic Site – #39 on the list as I work toward 60 new valid park activations this year. Will I continue my streak of historic properties or return to wildlife management areas next? Stay tuned…

Activation Video

If you are interested, here is the link for the activation video on POTA Babe YouTube channel: https://youtu.be/naqWlAatnIs

https://youtu.be/naqWlAatnIs

Equipment Used

[Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.]

• • Elecraft KX2
  • Pressure paddle (David VK3IL design)
  • Tufteln 9:1 EFRW Antenna
  • Tufteln RG-316 Coax
  • Tufteln Knee Board
  • Weaver Throw Weight
  • Marlow Excel Throw Line
  • Helinox Chair Zero High-back