New River State Park: Pairing the Discovery TX-500, Elecraft T1, and PackTenna 9:1 UNUN

Last month, my family went on a camping trip to New River State Park and had an amazing time.

I first discovered New River much earlier in the year when I did a multi-park and summit run.  I really liked the park and, especially, the campground, so I decided to return with the family for some proper outdoor fun and relaxation.

Of course, the benefit of camping at a state park is being able to play radio pretty much anytime while on the park grounds. For a few days, it’s like you’re living in a park activation and can actually set up an antenna and use it over the course of multiple days.

It’s such a big departure from my typically short (45-90 minute) park activations.

When we first arrived at the New River State Park campground, I deployed my PackTenna 9:1 UNUN random wire antenna.

I brought two transceivers with me: the Xeigu X5105 and the Discovery TX-500–I pretty much split my operating the time equally between the two radios.

New River State Park (K-2748)

Although I spent much more time on the air than I normally do, I didn’t make videos of each session. One reason is I wanted to operate with earphones–especially since some of my sessions were later in the evening or early in the morning. I didn’t want to disturb my neighbors at the campground.

That and, especially with the X5105, I wanted to see what it would be like to operate with earphones for extended sessions. Prior to making videos of my activations, I almost exclusively used earphones in the field. I appreciate the sound isolation earphones offer–I also find they help tremendously with weak signal work. When I make videos, however, I don’t want to go through the hassle of recording the line-out audio separately in order to use headphones, so I use an external speaker.

I decided to record my Wednesday, June 23, 2021 evening session with the Discovery TX-500.

Gear:

This session started only a few minutes prior to the end of the UTC day which meant I had to watch the clock very carefully and clear my logs at the beginning of the UTC day (20:00 EDT).

In POTA and other field activities, if your activation straddles the UTC day change, you must keep in mind that any contacts made after 0:00 UTC can only be counted on the next day’s logs. This was not a problem for me because I had logged dozens of stations earlier in the day, but if you ever start an activation close to the UTC day change, you need to make sure you log your 10 contacts for a valid activation prior to 0:00 UTC.

Auto-spotting help

Another thing complicating my sessions at New River State Park was that I chose not to schedule my activation via the POTA website prior to our trip.

If you schedule your activation via the POTA website, anytime the Reverse Beacon Network picks up your CQ calls (in CW), the POTA spots website will scrape that information and auto-spot you.  It’s an amazing convenience for those of us who operate CW.

I chose not to schedule my activation days at New River because I had also planned to operate at another nearby park during my stay and I didn’t want the system to spot me incorrectly. That, and I thought I would have mobile phone coverage to self-spot.

It turned out that–contrary to my mobile phone company’s coverage maps–I had no internet service at the park. None.

In order to get spotted, I relied on my Garmin InReach GPS/satellite device to send short text messages to my buddies Mike (K8RAT) and Eric (WD8RIF). My pre-formatted message would prompt them to check the RBN for my frequency, then spot me to the POTA site manually.

I’m incredibly grateful to have had them helping me in the background. Everyone should have a Mike and Eric as friends!

Video

I made a real-time, real-life, no-edit video of the entire activation. Note that it took a while to get spotted, so the first ten minutes are simply me talking (it’s alright to skip that bit…it won’t hurt my feelings!).

Also, here’s a QSO map of that day’s contacts. Note that this includes stations I logged later in the UTC day (i.e. the following morning/day.

Due to some unexpected conflicts, our camping trip was shorter than we would have liked. We plan to visit New River later this year and spend much more time there. It’s a beautiful park!

Thanks for reading this short field report and here’s hoping you get a chance to play radio in the field soon!

73,

Thomas (K4SWL/M0CYI)

4 thoughts on “New River State Park: Pairing the Discovery TX-500, Elecraft T1, and PackTenna 9:1 UNUN”

  1. Yes, it should providing the activation has been scheduled on the POTA site.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.