A colossal sunspot on the surface of the sun is large enough to swallow six Earths whole, and could trigger solar flares this week, NASA scientists say.
The giant sunspot was captured on camera by NASA’s Solar Dynamics Observatory as it swelled to enormous proportions over the 48 hours spanning Tuesday and Wednesday (Feb. 19 and 20).[…]
“It has grown to over six Earth diameters across, but its full extent is hard to judge since the spot lies on a sphere, not a flat disk,” wrote NASA spokeswomanKaren Fox, of the agency’s Goddard Space Flight Center in Greenbelt, Md., in an image description.
[S]ome of the intense magnetic fields in the sunspot region are pointing in opposite directions, making it ripe for solar activity.
“This is a fairly unstable configuration that scientists know can lead to eruptions of radiation on the sun called solar flares,” Fox explained.
Propagation in the higher portions of the HF band could be very interesting over the course of the next few days. If a solar flare erupts, however, it could make shortwave listening quite difficult.
And now, what we’ve all been waiting for: the Ten-Tec Argonaut VI has finally hit the market. Manufacturer Ten-Tec has already begun shipping the new units–I hear they’ve already sold out the first production run. For the past two months, I have had the pleasure of beta-testing this newest QRP transceiver, and I’m ready to share my findings. [Do please note that, other than beta-testing, I have no relationship with Ten-Tec.]
The Ten-Tec Model 539, A.K.A. Argonaut VI
I authored a post about the Model 539 when Ten-Tec first disclosed it at their 2011 Hamfest. The reactions and questions from readers came flooding in–so many, in fact, that I invited readers to send in those questions to share with the engineers at Ten-Tec. I presented these to the company, and posted Ten-Tec’s helpful responses.
Prototype of the Ten-Tec Model 539 QRP transceiver from the 2011 Ten-Tec Hamfest. Note that the speaker no longer has an externally mounted grill.
In truth, I don’t think that Ten-Tec was quite prepared for all of the interest in their modest QRP transceiver. But it was no surprise to me: I’ve always been a fan of Ten-Tec, and although I’ve not been as excited by the QRP offerings since the early Argonauts, I knew I wasn’t alone in my appreciation of this US-based radio company’s quality products.
The following review is not a test-bench review–it is, rather, a consideration of the usability, ergonomics, design, basic performance and, well, fun factor of the new Argonaut VI. It’s only fair to note that I don’t review transceivers often; rather, I focus primarily on receiver reviews at my alternate radio blog. But I could not resist the opportunity to investigate the newest in this venerable line of transceivers.
Size-wise, the Argonaut VI is smaller than the Elecraft K2 in every dimension.
You will note that I compare the Argonaut VI to the Elecraft K2 a number of times. Why? In my opinion, the K2 is the Argonaut VI’s closest competitor. It, too, is a front-panel QRP transceiver not for general coverage. While there are a number of differences, of course, I nonetheless feel the K2 is a closer match than the new Elecraft KX3, the Yaesu FT-817, or the Icom IC-703. Plus, I have a K2 that I already know and love here in my shack, so by default it has been my point of comparison throughout the beta-testing period.
Argonaut VI: first impressions
The Argonaut VI is an attractive, simple, sturdy little radio. It reminds me a great deal of the Ten-Tec Scout outfitted with its simple front panel. The front features two knobs: one controls the AF gain, while its outer ring controls RF gain; the other controls the bandwidth, while its outer ring controls the pass band. There is also an appropriately-sized display panel, quality tuning knob (see below), four multi-function buttons, and a three-position toggle switch.
The TMB switch is a simple and effective way of giving the Argo VI’s four function buttons multiple assignments.
A toggle switch? I can’t think of a recent front-panel radio in production that has had a proper mechanical toggle switch. On the Argo VI, this makes for a simple method to give the four function buttons a total of three one-push functions, each, for a total of twelve functions. Ten-Tec refers to this switch as the “TMB” (i.e., “Top-Middle-Bottom”) switch.
Size-wise, the Argonaut VI is smaller in every dimension than the K2 (see photos). Its physical dimensions are 2.25″H x 6.5″W x 7.6″D, less the knobs and connectors. It weighs a mere 3.6 lbs, and feels very light in my hands. The Argo VI has a sturdy Ten-Tec bail that snaps into the perfect position for tabletop operations. The display is crisp and clear, and actually contains a lot of information:
The Argonaut VI display is compact, yet crisp, clear and displays all important information.
Frequency
2nd VFO frequency
Mode
AGC speed
S Meter/SWR
Output power
Pre-amp
The display can be switched (via an internal setting) to blue (default), green, or red. One nice touch: the dot in the Ten-Tec logo is actually a red LED that lights up on transmit and ALC peaks.
Tuning knob
This is the best tuning knob I’ve ever used on a QRP rig
Perhaps I place more emphasis on a tuning knob that other hams. I liken it to shutting the door on a quality car: you want the door to shut solidly and feel substantial. But it may be more like a car’s steering wheel–after all, the tuning knob is how one interacts with the radio.
To me, the tuning knob is often a measure of a radio’s overall quality, in my humble opinion. As for the Argonaut VI? Here’s the answer: I was so impressed with the tuning knob on the Argonaut VI that I actually confirmed with Ten-Tec that the beta-unit’s tuning knob would also be used on production models. In short, the Argo VI’s tuning knob is heavy, perfectly-sized, has a light tactile grip, and is silky-smooth to operate.
There is no play whatsoever in the action. I like the adaptive tuning, too–when you tune slowly, you’re changing the frequency by hundredths of a kHz; spin the knob quickly and you’ve just shot across the band. After tuning the Argo VI for a bit, other small radios’ tuning knobs begin to feel cheap. Continue reading A review of Ten-Tec’s Argonaut VI QRP transceiver, Model 539→
If the US Postal Service (USPS) gets its way, it will no longer sell International Reply Coupons (IRCs) after January 27, 2013. According to the October 23 edition of the Federal Register, there is not sufficient demand for the USPS to continue offering IRCs to customers; however, per the Universal Postal Union (UPU) regulations, the USPS must continue to exchange (redeem) IRCs that have been purchased in foreign countries and presented at USPS facilities. The current Nairobi model is valid through December 31, 2013. Comments on this proposed change will be accepted through November 23, 2012.[…]
[…]All over the world, ham radio operators and Morse Code enthusiasts beam dot, dash messages straight at the moon, then wait 2.7 seconds for the signal to bounce back. They call these “E.M.E.” transmissions, which stands for “Earth-Moon-Earth” or — more popularly — “moonbouncing.” I suppose it’s fun to smack little beeps against a sleepy rock 239,000 miles away and have those beeps come flying back at you. Plus, it’s easy.
[…]Not so long ago, a Scottish artist, Katie Paterson, turned Beethoven’s Moonlight Sonata into Morse code, (yup, you can do that, too) and bounced it off the moon. Some musical phrases got trapped in moon craters and didn’t come back, which she found so intriguing, she put the ricocheted, fragmented Moonlight Sonata on a player piano and you can now see her MoonBounced, Morse-Coded piece being not performed by anyone, the keys going up and down on their own, on YouTube.
I’m a huge fan of Krulwich’s witty science articles and am thoroughly impressed that he brings CW into the popular press. Nevermind his tongue-in-cheek!
PS: As I wrote Robert, I think Artemis would love to hear the “sacred language.”
Two Ten-Tec Model 539, Argonaut VI’s, will be on the air at the Ten-Tec Hamfest this weekend.
This weekend, I’m heading to the Ten-Tec Hamfest at the Ten-Tec factory in Sevierville, Tennessee. This is, hands down, my favorite hamfest of the year. Not only is it completely free, but the ham radio flea market section has a higher percentage of real radio gear than any other hamfest with which I’m familiar. The event is being held today and tomorrow (the flea market is Saturday only). You can read details about the hamfest on Ten-Tec’s website.
Agonaut VI update…
I just got the following word directly from Ten-Tec Engineer, John Henry, regarding the Model 539 (Argonaut VI) transceiver; in a nutshell, they will not be taking orders at the hamfest as they had hoped, price is not fixed but ballparked, and rigs will be available at the hamfest for testing:
TenTec is not going to take early orders for the 539 at the TenTec Hamfest on 9-28/29-2012. Essentially the rig is performing to our specification level, but we have a few things to finish before we can ship them to customers, [such as] the user’s manual, FCC testing, etc.
We do have a pilot run of 25 units that will be visible to those taking the tour, and a couple will be set up for hams to use at the Hamfest this weekend. In about 1-2 weeks from now, some of the pilot run units will be distributed to hams for another round of beta testing.
Regarding the price of the 539, until we finish this last round of beta testing we aren’t sure if we have each and every cost factor taken into consideration. Never know what a broader field of testers will find that may increase costs. So, there is no final customer price yet. But as we have stated at all of the hamfests so far, we can still say it will be well below $1000, and we will still meet our goal of having the price of the 539 [plus] the price of the 418 to be less than the cost of the 599, at near the specification level.
The Ten-Tec Argonaut VI on the work bench at Ten-Tec
I plan to post photos from the Ten-Tec hamfest and report any other updates. Stay tuned!
This video features operations of the QRP DE-Xpedition aboard the USS Slater. Among other innovations, they show a protoype Begali Adventurer in action. The Adventurer is a miniature set of paddles which attaches to portable QRP rigs like the new Elecraft KX3.
I just received word from John Henry at Ten-Tec that their time frame for production runs of the Model 539 (Argonaut VI) is on-track with estimates provided at the 2012 Dayton Hamvention.
John said:
We are running a small production run right now, working out the kinks of getting it into production. Most places call these “Pilot runs”. Pilot Runs basically get the factory up to speed with the units before we go to full scale production quantities.
He doesn’t see any reason, at this point, why they wouldn’t hit the late fall 2012 ship dates. He also said that they’re working hard to possibly take orders for the Argonaut VI at the 2012 Ten-Tec Hamfest being held at their factory in Sevierville, Tennessee, September 28-29th.
According to John, several Ten-Tec customers have said that they are going to buy a Model 539 and the Model 418 (companion 100 watt linear amplifier) when the 539 starts shipping.
I will attend the 2012 Ten-Tec Hamfest and plan to post updates on QRPer.com from there.
Very sad news in the amateur radio community today. I just learned that Joel Kleinman (N1BKE) is SK after a house fire this past weekend. I met Joel once and he was a super nice fellow. We should all be thinking about his wife, who is in the hospital. Follow the ARRL for more.
The ARRL is sad to report that QST Managing Editor Joel Kleinman, N1BKE, died in a house fire this past weekend. His wife Jayne is still in the hospital; her condition is unknown at this time. No arrangements have been made at this time. We will post more information as it becomes available.
QRP radios, product announcements, reviews, news and more. Low power amateur radio fun!
Please support QRPer by adding us to your whitelist in your ad blocker. Ads are what helps us stay online. All of our ads are ham radio related--no junk, we promise! Thank you!
(Source: 
Very sad news in the amateur radio community today. I just learned that Joel Kleinman (N1BKE) is SK after a house fire this past weekend. I met Joel once and he was a super nice fellow. We should all be thinking about his wife, who is in the hospital.