Thursday, October 28, 2021 was a wet, rainy day but I wanted to do a POTA activation on the way back to the QTH after having visited my parents for a couple nights.
I didn’t have a lot of radio gear with me on that trip, but I had the right gear: my Elecraft KX2 transceiver and AX1 antenna. If I could activate a park under a covered picnic shelter, I knew I would stay dry while playing radio.
There are only two parks within a reasonable detour that have covered picnic shelters: Lake James State Park and Tuttle Educational State Forest.
Lake James was the shortest detour, but they tend to be busier than Tuttle and last time I was there? Yeah, the picnic shelter was occupied.
You might have noticed that normally I’m a good 2-4 weeks behind posting activation videos and field reports. This is due to the fact that I typically record an activation video one week, upload it sometime within the following two weeks, then write up the field report, add photos, and put it all together when the stars align.
Much of my workflow is dictated by the fact that it can (literally) take 2-3 days for a video to upload from my rural QTH. Therefore, I never upload from home, only when I have proper bandwidth.
Because I receive so many tips from readers here on QRPer, I wanted way to share them in a concise newsletter format. To that end, welcome to QRPer Notes, a collection of links to interesting stories and tips making waves in the world of radio!
A few weeks ago, Mike (N2HTT), reached out after seeing this field report and video featuring the LD-11 transceiver.
I mentioned to him that I gave the LD-11 to my daughter Geneva (K4TLI) as a prize for passing her General class exam in the spring.
Mike very kindly offered to send her a set of personalized 3D-printed side rails he designed for the LD-11 and SKY-SDR.
They were incredibly easy to install and the quality is excellent. They’re lightweight, yet incredibly sturdy. Her callsign is tastefully embedded on the left frame bracket.
I love plugging mom-and-pop ham radio stores, so please check out his site.
And, Mike, thanks again. Geneva absolutely loves them and knows this will keep the front panel and buttons protected in her pack and during our upcoming field activations this winter!
I don’t often read comments in ham radio forums and discussion groups.
Recently, however, I was trying to dig up information on a field antenna design and the search results lead me to two articles and discussions on two of the most popular ham radio sites on the internet.
I read through the comments and (you might have guessed) was really disappointed with the number trolls who seemed to thrive in that fertile environment. It blows my mind that discussions like these seem completely unmoderated. I assume it’s a conscious decision since we seem to live in a society that rewards drama and division–I assume this leads to more site traffic and thus more revenue.
It’s a shame. It would be incredibly discouraging to a new ham who is reading the same article and comments looking for ideas. Gives one the impression the hobby is full of (I’ll keep my language clean here) schmucks.
But I digress…
What was perhaps equally discouraging were all of the comments from those who were trying to explain to the authors how the antenna design in their article simply wouldn’t work. Even when the author posted positive results/data from having used the antenna.
While not all of the naysayers were being rude–and sometimes in their roundabout way I’m sure they felt they were being helpful–I can’t help but feel sorry for them.
Someone asked me recently which activity I prefer more: Summits on the Air (SOTA) or Parks On The Air (POTA)?
Truth is, I like both.
I like SOTA because I love hiking and playing radio on the summits of some pretty impressive mountains. I’m often treated to amazing views and the DX can be spectacular. I love the sense of accomplishment when the activation goes well and I’m back home later feeling a bit tired from a long hike. Good stuff!
I like POTA because it’s incredibly accessible (thus fits in my tight schedule easily). Many of the parks have great hiking trails, and there’s almost always a picnic table available making set up so much easier. Here in western North Carolina it’s almost a given that park picnic tables are surrounded by large trees and have a reasonable amount of space, thus POTA sites can be ideal for antenna experimentation.
I don’t typically experiment with antennas during SOTA because after hiking 2-3 hours to a summit, I feel pretty invested in the activation and the last thing I want to do is roll the dice with my antenna. With POTA, I can bring a few extra supplies or “plan B” antennas if something goes sideways. Plus, unlike parks, summits are often lacking in tall trees so I stick with shorter wire antennas and self-supporting verticals.
On the morning of October 20, 2021, I decided that I wanted to try a new antenna or an antenna I hadn’t used in quite some time. My intention was to dig out my Wolf River Coils TIA vertical, but when I reached into my antenna bag, I pulled out a nondescript Shure microphone pouch. I scratched my head for a moment…
For the life of me, I couldn’t remember what this was, so I opened it up and discovered a doublet inside! Not just any doublet, either–based on the use of a 35mm film canister in the antenna’s construction, I knew it had to be a creation of my buddy Eric (WD8RIF).
On Thursday, October 7, 2021, I was driving back to the QTH and had a hankering to do an activation. There was only one problem…
Rain.
Lots of rain…
As I was driving on Interstate 40 west-bound, I passed through bands of rain producing torrential downpours; the kind that brings interstate traffic to a crawl. Weather-wise, this is not typically when I would contemplate a park activation. I did a quick mental inventory of what I had in the car. Turns out I had the Icom IC-705 and the Elecraft KX2.
I also had the Elecraft AX1 portable antenna. Having used the KX2/AX1 pairing under picnic shelters with success, it was a no-brainer what I’d use at Lake James.
Most North Carolina state parks have covered picnic shelters that are first-come, first-serve or can be reserved (at no small expense) for group gatherings. There’s a really nice large picnic shelter at the Catawba River access of Lake James State Park–in fact, I took shelter there earlier this year during an activation.
Those of you who subscribe to the Elecraft newsletter, no doubt, took note of this particular news item:
Price Increases Coming in November
By now you may have seen and heard the numerous communications regarding the impact the global pandemic is having on supply chains, and what has in turn resulted in price increases of raw material, parts, and transportation costs. Unfortunately, we have also been affected by these increases. Given this situation, we will be increasing prices of products across all product lines on November 15, 2021. Any orders before November 15, 2021 will be honored at the lower prices.
We value your business and thank you for your patience as we navigate these challenging times.
Elecraft isn’t the only manufacturer who will soon increase prices. I’ve spoken with other manufacturers who’ve told me that, along with raw materials/parts, even their shipping and packing supplies have increased as much as 15-20%. For many manufacturers, this takes a deep cut into narrow profit margins, so price increases are inevitable.
If you’ve been planning to purchase an Elecraft product even knowing there may be a lead time involved, you might consider pulling the trigger before November 15, 2021.
First of all, thank you to everyone who tried to hunt me this morning while I activated Mount Mitchell Summit and Park!
When I posted an announcement about the activation this morning, I didn’t expect much of a response due to the short notice. I don’t typically announce my activations, but the Mitchell SOTA activation was a special one for me because it’s my favorite NC park and also fairly local (well, as the crow flies from the QTH).
This was a “welcome back to winter conditions” SOTA activation and I knew it would be in advance.
The drive to the summit, starting around 1,000M ASL (3,000′) was in heavy, heavy fog. The ceiling was low and I thought perhaps the summit would peak through, but I was wrong. It was also foggy on the summit and about 33F (0.5C) per my car.
It was a gorgeous site though as the summit was covered in rime ice.
There were maybe two other visitor cars in the park–after all, most go to Mitchell for the views and there were none this morning.
I found a nice spot in the woods well within the activation zone, but not at the observation deck on the summit.
Pile-ups
I’m not sure if I called CQ more than twice with the QCX Mini before I was slammed with a steady pile up with many stations from Europe.
The QCX performed well and obviously the PackTenna 20M EFHW did as well, but the little amplified speaker connected to the QCX-Mini struggled with the variation in signals and tones. It sort of fell apart on me and after logging, perhaps, 30 stations, I switched out with the KX2.
If you chased me and I wasn’t able to copy you, my apologies. It was tough to hear signals via that little speaker–everything simply blended together.
I’ll be writing a full report in due time once I have the video uploaded in a couple weeks, but suffice it to say, 5 watts and a wire worked this morning. Here’s the QSO Map:
Click to enlarge.
The QSO map doesn’t include a number of stations on the west coast either.
A struggle for K4SWL
My hands were a wee bit stiff as they dealt with the cold/damp conditions, so my fist was (as I had predicted) rather sloppy. 🙂
I was also struggling to type in callsigns correctly into the HAMRS app on my phone and that certainly messed with my rhythm handling QSOs.
This was my first cold activation since March. I’ll get back into winter mode soon and toughen up again!
The little speaker, combined with so many contacts zero-beating me, turned into a 5-7 second long steady tone in the pile-up. I seriously contemplated running split to spread everyone apart, but I’ve never seen that done with POTA or SOTA so didn’t attempt it.
Seasoned SOTA CW activators would’ve certainly found the pile-up much more manageable.
When I went QRT, I happened to turn on my HT and had the SOTA simplex frequency locked in. Two second after turning on the HT I heard KN4LRO on Round Mountain (W4T/SU-029) and worked him S2S. My first VHF S2S!
The SOTA/POTA/WWFF activation was AMAZING fun, though. One of my favorite SOTA activations to date. Again, I made a video of the activation and will write up a proper field report within the next couple of weeks.
As I left the park, I found it odd that I was the only visitor there. As I approached the front gates (again, in heavy fog) I saw why: they had closed the park and were only allowing people to leave, not enter.
I felt pretty darn lucky to snag Mount Mitchell this morning.
I’ve said this before, but Mount Mitchell is truly my special, happy place.
Speaker suggestions?
In the meantime, I’d love your suggestions and links to proper, capable amplified portable speakers. I need something much better to pair with the QCX Mini, MTR3B, and KX1.
A YouTube subscriber recently asked when I planned to break in my QCX-Mini 20 meter transceiver and also if I could please announce some of my activations here on QRPer.
I’m doing both this morning!
I plan to do a SOTA activation of Mount Mitchell (W4C/CM-001) and a simultaneous POTA/WWFF activation of Mount Mitchell State Park (K-2747/KFF-2747) this morning.
I’ll be using my single-band QCX Mini transceiver and, hopefully, pairing it with my PackTenna 20M EFHW, else my trusty MPAS Lite.
I’m not exactly sure what time I’ll be on the air, but I assume between 14:30 – 16:30 UTC (10:30 – 12:30 EDT). Hopefully, the POTA and SOTA networks will auto-spot me, but if not, just check the RBN: http://www.reversebeacon.net/dxsd1/dxsd1.php?f=0&c=k4swl&t=dx
It’ll be hovering around 32F-36F (0-2C) on the summit and likely a bit windy. Although I usually do well in cold temps, this will be the coldest activation I’ve done in months, so expect some sloppy CW. 🙂
I’ll try to make a video of this activation, but I’m not entirely sure how well it’ll work out. Much will hinge on if I can find my small amplified speaker for the QCX-Mini (which lacks an internal speaker). I’m going to find a spot within the SOTA activation zone to set up, but not on or near the summit observation area as it gets so busy there.
We’ll see how this goes. I am really looking forward to using the QCX-Mini in the field. I’ve used it a bit at the QTH and am incredibly impressed with its performance.
I’ll only be on 20 meters this time (obviously) but hopefully I can at least make enough contacts to validate both the summit and park.
QRP radios, product announcements, reviews, news and more. Low power amateur radio fun!
Please support QRPer by adding us to your whitelist in your ad blocker. Ads are what helps us stay online. All of our ads are ham radio related--no junk, we promise! Thank you!
Thursday, October 28, 2021 was a wet, rainy day but I wanted to do a POTA activation on the way back to the QTH after having visited my parents for a couple nights.
