Category Archives: News

Elecraft AX2 20M modifiable pocket antenna now shipping

AX2 illustration by Elecraft

Many thanks to Wayne (N6KR) at Elecraft who notes that the Elecraft AX2 20 meter pocket antenna is now shipping:

https://elecraft.com/collections/antennas/products/ax2-minature-20-meter-whip-antenna

Here’s the product description from Elecraft’s website:

The AX2 is small enough to take anywhere – just in time for lightweight field ops during the new solar cycle. Use it HT-style with a hand-held, like the KX2; on a picnic table with an AXB1 whip bipod; or with a tripod and AXT1 tripod adapter. The AX2’s rugged, nylon housing is water-resistant, with low wind resistance and our new anti-wobble design.

Illustration by Elecraft

Experimenters will love the AX2’s versatile design. A snap-off cover provides access to the high-Q inductor. Simply remove turns and re-solder one wire to cover your favorite band. Clip-off tabs are provided for band identification.

Elecraft also provides an AX1 and AX2 comparison chart on the AX2 product page:

COMPARISON CHART

The table below shows how the new AX2 20-meter mini-whip compares to our original AX1 multi-band whip. Both are designed for lightweight portable operation. The versatile AX1 covers multiple bands via a selector switch and can handle up to 30 W continuous TX power.

The ultra-compact AX2 has a new anti-tilt base design that minimizes BNC connector wobble – ideal for hand-held (HTstyle) use. While the AX2 covers 20 meters as shipped, it can be modified by the user to cover any single band from 17 through 6 meters. The base unit includes small tabs that can be clipped off to identify the target band.

NOTE: Both whips are intended to be used with an ATU to compensate for terrain, body capacitance, height, etc.

A reader recently asked if I’d be selling my AX1 after learning about the AX2, but that isn’t going to happen. The AX2 is a 20 meters and up antenna and I see it as being a brilliant SOTA companion since its lightweight, stable design should do well on windy summits.

For POTA and WWFF, however, I really rely on the 40 meter band for most of my contacts. The AX1 covers 40 meters brilliantly (and 20M and 17M) so I’ll still rely on it quite heavily.

Click here to check out the AX2 antenna on Elecraft’s website. The price is currently $79.99 US plus shipping.

Josh checks out a pre-production Xiegu X6100

Josh (KI6NAZ), over at the excellent Ham Radio Crash Course YouTube channel, has just published a video demonstrating a pre-production Xiegu X6100.

If you’ve been interested in the X6100, I highly recommend checking it out.

Josh compares the X6100 with the X5105 in terms of size and functionality, and even makes a QSO with it. For CW ops, he also demoes the relay clicking sound (spoiler alert: it uses relays instead of PIN Diode switching).

His particular unit is really a pre-production unit–it sounds like the first production run (that many early adopters should soon be receiving) will have upgraded software and even hardware.

Josh (rightfully so) holds out on making a recommendation until he’s able to test the first production run unit–the same version early adopters will receive–which is being sent to him soon.

Check out his video below:

Click here to view on YouTube.

I’ve gotten so many questions about the X6100 from readers and YouTube subscribers. Fear not! I will get a chance to check out the X6100 in the near future. In fact, Josh is sending me the Radioddity loaner unit he’ll be testing. I’m not sure how long I’ll get to hold onto it, but I’ll give it a thorough workout.

In addition, I know Scott (KN3A) has purchased one of the first production run units and will give us his impressions–since he owns the IC-705 and has owned the X5105 in the past, he should have some valuable insight. Stay tuned!

If you’re considering purchasing the X6100, you might check out Radioddity’s upcoming Black Friday sale.  They have a sign-up form on the X6100 product page. I have no inside information, but I must assume the X6100 will either be discounted or come with extra goodies (or both?).

Do you already have an X6100 on order? Curious if it looks like the X6100 is on track to meet your expectations after watching Josh’s demo.

QRPer Notes: Paul’s Page of Radio Groups, Seven Transistor SSB Transceiver, Xiegu X6100 Update, and Hamvention 2022

Because I receive so many tips from readers here on QRPer, I wanted way to share them in a concise newsletter format.  To that end welcome to QRPer Notes, a collection of links to interesting stories and tips making waves in the world of radio!


Paul’s Page of Ham Radio Groups

Many thanks to Paul (W4/VP9KF) who shares this list of popular ham radio groups. He updates these regularly and the page even dynamically monitors the number of members in each group:

http://www.g4bki.com/groups.htm

Paul’s website is chock full of info, so grab a cuppa’ and start exploring!

Novel SSB transceiver design with only seven transistors (Southgate ARC)

Ryan Flowers W7RLF writes on Hackaday about a simple 7 transistor QRP SSB transceiver

When Pete Juliano N6QW sat down to design a sideband transceiver for the 20 Meter (14 MHz) ham radio band, he eschewed the popular circuits that make up so many designs. He forged ahead, building a novel design that he calls Pete’s Simple Seven SSB Transceiver, or PSSST for short.

What makes the PSSST so simple is not only its construction, but the low component count. The same circuit using four 2N2222A’s is used on both transmit and receive.

Read the full Hackaday post at
https://hackaday.com/2021/11/20/pssst-heres-a-novel-ssb-radio-design-with-only-seven-transistors/

Xiegu X6100 Update via Radioddity

Several QRPer readers have reached out noting that Radioddity is now taking orders for the second production run of the Xiegu X6100–they’ve already sold the first batch. Radioddity hopes to ship the first batch soon and the second batch before the end of 2021.

They’re currently running a Black Friday promotion which includes the X6100.

I haven’t heard from other Xiegu distributors yet, but it sounds like early adopters will be getting their units before the end of the year.

I will receive a loaner unit to evaluate and take to the field hopefully within the next few weeks and several readers have orders in the first production run. Scott (KN3A) will be sharing his early experience with the X6100 as well.

Dayton Hamvention is a ‘Go’ (Southgate ARC)

Dayton Hamvention 2022 is not just going to be a premier hamfest but a reunion, as organizers prepare for the first gathering at the Xenia Fairground and Expo Center in Ohio after two years of cancellations.

Hamvention’s general chairman Rick Allnut WS8G said in a phone interview that committees have been meeting and volunteers are committed to making up for the time lost to pandemic cancellations.

Hamvention will be happening on Friday May 20th through Sunday May 22nd with an international reception scheduled on Thursday May 19th. Rick said the registration site is already taking bookings from vendors and inside exhibitors and individual visitors can already buy their tickets. All details are available on the hamvention.org website.

RIck said: “Tickets are all printed and ready to go.”

https://hamvention.org/

40M Activation: Pairing the Icom IC-705 and CHA LEFS at Tuttle Educational State Forest

I’ve gotten a few messages from readers lately asking, “Why no love for the Icom IC-705?

Looking back, I realize that I haven’t had the ‘705 in the field for quite some time (at least, in a video and field report).

Truth is, the ‘705 has been doing duty as a shortwave listening receiver in shack and just hasn’t hopped into my field pack recently. Since it’s important for the health of all field radios to soak in the outdoors on a regular basis, I packed it in my bag and took it to one of my favorite parks.

Tuttle Educational State Forest (K-4861)

The weather was beautiful on Thursday, October 21, 2021.

When I arrived at Tuttle, the first thing I did was hike their 2 mile loop to get the blood pumping.


This also gave me time to decide on the antenna to deploy: my Chameleon CHA LEFS.

The CHA LEFS sloper

The CHA LEFS has served me quite well in the past, especially on days with mediocre propagation.

During my hike I decided to do the entire activation on 40 meters only, just to get a better idea how the CHA LEFS’ propagation footprint might look with a larger sample size.

Gear:

On the Air

This was also the first time I’d used my N0SA paddles with the IC-705. Isn’t it cute?

Setup was quite easy.

I deployed the CHA LEFS with the feed point at about 35-40′ into a large tree.

The radiator sloped down to a point in the middle of a field and the end was elevated perhaps 4′ off the ground. I secured the end of the antenna to a length of paracord, the end of which was attached to a heavy stick on the ground, stretching the radiator.

The CHA LEFS is resonant on 40 meters, so no external ATU was necessary.

I hopped on the air, started calling CQ POTA in CW and within 10 minutes was rewarded with 10 contacts. It doesn’t get much better than this for a good start!

I continued calling CQ and, in the end, worked a total of 22 contacts in 30 minutes–almost all in CW. Check out the video below to see how it all played out.

Many thanks to KC5F and N9UNX for the Park-To-Park contacts!

Video

Here’s my real-time, real-life video of the entire activation (less antenna set up and take-down):

Click here to view on YouTube.

QSO Map

The QSO Map shows an interesting pattern: a ring with a few close regional stations (almost NVIS), and an outer ring of 40 meter skywave:

Thank you!

I believe one of the attractions of activating parks and summits is the fact that we really have no idea in advance how it might all play out. It’s a bit like going fishing.

I’ve gotten a lot of questions from readers lately about what propagation tools I use. In truth, my main propagation forecasting tool is my buddy Mike (K8RAT). Before I head out–or if he knows I’m hitting the field–he’ll usually text me current conditions and they’re quite accurate.

At the end of the day, though, propagation forecasts never stop me from doing an activation when I want to play radio. I just go out there and see what happens. As I’m sure my childhood fishing buddy–my Great Uncle Luther–would have said, “Any day fishing is better than a good day at work!” (Of course, a real quote from Uncle Luther would have included more “colorful metaphors.”)

A special thanks to those of you who are supporting the site and channel through Patreon and the Coffee Fund. While certainly not a requirement as my content will always be free–I really appreciate the support.

73,

Thomas (K4SWL)

QRPer Notes: South Asian Amateur News Blog, Keying with the IC-705 Mic, and KX2/3 Capacitive Key Clearance

Because I receive so many tips from readers here on QRPer, I wanted way to share them in a concise newsletter format.  To that end, welcome to QRPer Notes, a collection of links to interesting stories and tips making waves in the world of radio!


VU3HZW’s News blog primarily for South Asian Amateurs

Many thanks to Saquib (VU3HZW) who writes:

Hello Thomas,

My name is Saquib VU3HZW from North Eastern India. Your blog is a trove of knowledge for any QRP operator. Your style of writing is awesome!

Now, here’s the story. I’ve started a Amateur Radio News & Blog – itshamradio.com. As a QRPer, you must be familiar with VU3SUA (Sunil Lakhani) from https://amateurradiokits.in.

We would be pleased if you [and your readers] could read some of the articles and give us some valuable feedback. This is just an honest attempt by us to create a vibrant amateur radio news blog primarily for South Asian Amateurs.

Click here to visit ItsHamRadio.com.

Good luck with the new site and thank you for sharing it with us, Saquib!

IC-705 Mic A/B button CW Keyer Challenge

Many thanks to Keith (GW4OKT) who points out that the Icom IC-705’s A/B buttons can be set up to send dits and dashes. It doesn’t allow for proper iambic keying and, as Keith admitted, isn’t terribly easy in practice. Nevertheless, he gave it a go and provided these short videos operating the IC-705 at 20WPM CW:

Click here to view on YouTube.

Click here to view on YouTube.

Keith followed up by saying, “Not for the faint hearted Tom, it’s difficult; I think I’ll just take a spare key!”

Indeed! Thank you, Keith!

KX2/KX3 Capacitive Key Clearance

Many thanks to Dennis (K2DCD) who notes that UC6UAA is selling out his inventory of the KX2/KX3 Capacitive paddles.

If I didn’t already own KXPD2 paddles, I would certainly buy a set. The price is excellent at $40 US with free shipping.

Click here to check it out and/or place an order.

Thanks for the tip, Dennis!

POTA Field Report: Coffee & QRP at Tuttle Educational State Forest

Thursday, October 28, 2021 was a wet, rainy day but I wanted to do a POTA activation on the way back to the QTH after having visited my parents for a couple nights.

I didn’t have a lot of radio gear with me on that trip, but I had the right gear: my Elecraft KX2 transceiver and AX1 antenna. If I could activate a park under a covered picnic shelter, I knew I would stay dry while playing radio.

There are only two parks within a reasonable detour that have covered picnic shelters: Lake James State Park and Tuttle Educational State Forest.

Lake James was the shortest detour, but they tend to be busier than Tuttle and last time I was there? Yeah, the picnic shelter was occupied.

On the other hand, I was nearly certain that I would have the picnic shelter all to myself at Tuttle. It would be a slightly longer detour, but worth it. Continue reading POTA Field Report: Coffee & QRP at Tuttle Educational State Forest

Pairing the KX2 & Speaker Wire Antenna at Johns River State Game Land

You might have noticed that normally I’m a good 2-4 weeks behind posting activation videos and field reports. This is due to the fact that I typically record an activation video one week, upload it sometime within the following two weeks, then write up the field report, add photos, and put it all together when the stars align.

Much of my workflow is dictated by the fact that it can (literally) take 2-3 days for a video to upload from my rural QTH. Therefore, I never upload from home, only when I have proper bandwidth.

However, I’m happy to announce that this field report and video are going to move to the front of the line! Continue reading Pairing the KX2 & Speaker Wire Antenna at Johns River State Game Land

QRPer Notes: NT0Z’s Stealth Antennas, Matt’s Super QSO App, The Communicator, and Andy tests the AX1

Because I receive so many tips from readers here on QRPer, I wanted way to share them in a concise newsletter format.  To that end, welcome to QRPer Notes, a collection of links to interesting stories and tips making waves in the world of radio!


Stealth Antennas

If you haven’t already, I highly recommend listening to the latest Ham Radio Workbench podcast which features guest host, Kirk Kleinschmidt (NT0Z).

Kirk has an amazing background in publishing and writing and so many tips and suggestions for those who are trying to play radio in a stealthy way.

Check out the podcast, but you might also consider taking a look at Kirk’s book, “Stealth Amateur Radio.”  It can be purchased from his website as a digital book for much less than a paper copy. Continue reading QRPer Notes: NT0Z’s Stealth Antennas, Matt’s Super QSO App, The Communicator, and Andy tests the AX1

LD-11 side rails via N2HTT

A few weeks ago, Mike (N2HTT), reached out after seeing this field report and video featuring the LD-11 transceiver.

I mentioned to him that I gave the LD-11 to my daughter Geneva (K4TLI) as a prize for passing her General class exam in the spring.

Mike very kindly offered to send her a set of personalized 3D-printed side rails he designed for the LD-11 and SKY-SDR.

They were incredibly easy to install and the quality is excellent. They’re lightweight, yet incredibly sturdy. Her callsign is tastefully embedded on the left frame bracket.

Mike has an online shop at HamGear3D.com where I see he also sells a 3D-printed frame for the Icom IC-705.

I love plugging mom-and-pop ham radio stores, so please check out his site.

And, Mike, thanks again. Geneva absolutely loves them and knows this will keep the front panel and buttons protected in her pack and during our upcoming field activations this winter!

Thank you again!

My Motto? Less theory, more practice!

I don’t often read comments in ham radio forums and discussion groups. 

Recently, however, I was trying to dig up information on a field antenna design and the search results lead me to two articles and discussions on two of the most popular ham radio sites on the internet. 

I read through the comments and (you might have guessed) was really disappointed with the number trolls who seemed to thrive in that fertile environment. It blows my mind that discussions like these seem completely unmoderated. I assume it’s a conscious decision since we seem to live in a society that rewards drama and division–I assume this leads to more site traffic and thus more revenue.

It’s a shame. It would be incredibly discouraging to a new ham who is reading the same article and comments looking for ideas. Gives one the impression the hobby is full of (I’ll keep my language clean here) schmucks.

But I digress…

What was perhaps equally discouraging were all of the comments from those who were trying to explain to the authors how the antenna design in their article simply wouldn’t work.  Even when the author posted positive results/data from having used the antenna. 

While not all of the naysayers were being rude–and sometimes in their roundabout way I’m sure they felt they were being helpful–I can’t help but feel sorry for them.

The naysayers, that is.

Why? These are people who are afraid to experiment. Continue reading My Motto? Less theory, more practice!