Category Archives: News

Field Reports, Guest Posts, Morse Code, News, Portable, QRP, SOTA

CQ From Latvia with Love

4 Comments

CQ From Latvia with Love

by Leo (DL2COM)

A completely under-prepped SOTA & WWFF activation which turned out to be perfect

In preparation for a tough conversation a good friend once told me: “You know what, just walk into the fire. If you have bad news to deliver, don’t sugar coat it and do it right away. You’ll be fine.” 

“Just walk into the fire.” I believe this can be applied to many other situations in life. While I would consider myself to be well-prepared on most trips, hikes and activations and getting a lot of joy out of optimizing my kits I try to stay open-minded. Imagine the things you would miss out on if you wouldn’t be spontaneous or only do things while fully prepared and 100% safe – even if it means taking risks.

On the road back to Riga
The QCX-Mini silently drying after a successful activation

Last Wednesday, I kind of walked into the fire. Not fire as in fire-fire but fire as in Latvian winter storm. In general this wouldn’t be such a big deal had I brought the right clothes, gear and shoes to my short business trip to Riga.

Due to very strict luggage restrictions I could only bring one small backpack for three days. Inside I had enough room for a laptop, washbag, spare clothes and the compact QCX-Mini Kit I built for exactly these occasions. I was wearing sneakers and jeans. At this point I had not planned a specific activation but I wanted at least to be able to operate YL/ & /p maybe 30 minutes from a nearby park – not a problem if you can jump right back into the warm hotel afterwards.

My rental car rocking summer tires in Winter (yes, I was driving veeeeeeery slowly)

During our stay, my schedule for Wednesday morning freed up so I decided to try activating one out of only three SOTA summits in Latvia: YL/YL-003. It turns out this summit is also located within WWFF territory YLFF-0007 about a 1,5h drive from Riga. Big Thanks to Val (YL2SW), Latvia’s WWFF manager, for assisting me with local rules and processing my log. A quick look at the weather forecast showed freezing temperatures, 90% chance of snow, heavy winds and overcast. Many of you will understand why a SOTA&WWFF combo in a rare country could be a small reason not to use the hotel’s sauna on a day like that. Sometimes things just need to get done.

Summit watchtower
The majestic watchtower on YL/YL-003

I got up early the next morning and was very happy to be able to grab a Bolt rental car from the street and get going quickly. The drive went by without issues up to a point just about 3km away from the mountain (well, 1-pointer hill I should say). The roads were completely covered in snow so I could barely see where I was driving. Latvia is a rather flat country but here it started to get a bit hilly and the tires were certainly not cut out for that. Continue reading CQ From Latvia with Love →

Antennas, Field Reports, News, Portable, POTA, QRP, Videos

Breaking in the new Elecraft AX2 during a short POTA activation

6 Comments

As I mentioned in my recent AX1 vs AX2 video and blog post, I purchased an Elecraft AX2 antenna and bi-pod in late January (note: two days before Elecraft announced their February ’23 sale price! Doh!).

I received the AX2 package a few days later and I was certainly eager to take it to the field.

My first opportunity came on Tuesday, February 14, 2023, when a short activation window opened up in the afternoon.

Zebulon B. Vance Birthplace (K-6856)

One of the first things I noticed after taking the AX2 out of the package is just how solid and compact it is. The AX1 is short, but the AX2 is a few inches shorter because the base is more compact.

Unlike the AX1, the AX2 is a mono band antenna, thus the coil only needs to accommodate one band. When you receive a new AX2, it’s configured for 20 meters out of the box, but the user can modify the coil to work anything from 20 to 6 meters.

“Resonant-ish”

Even though I mentioned this in my AX1 v AX2 article and video, I’d like to reiterate that the AX2 is nearly-resonant on 20 meters. It is not reliably resonant.

I’ve still been receiving a lot of messages from readers stating that their AX2 and AX1 are resonant on 20 meters, so they don’t pack any sort of matching device in their field kit. They simply hook the AX2 up to their little QRP radio and hop on the air.

While it’s true that these antennas may provide an acceptable SWR most of the time, you really can’t rely on a solid, reliable match as you could with an end-fed half-wave.

I’ll repeat what I mention in a previous post:

Small verticals like the AX1 and AX2, that use coils to electrically “lengthen” the antenna, have a higher Q than, say, a large aperture quarter or half wave antenna. In practical terms, this means that the window of resonance is narrow and more fickle than, for example, an end-fed half-wave.

A lot of factors can affect the SWR on higher-Q antennas like the AX1/AX2 including:

      • the type of terrain,
      • height off the ground,
      • length of counterpoise,
      • configuration of counterpoise,
      • and, most notably, the operator’s own body capacitance.

You may find that the AX2, for example, is natively resonant on 20 meters at one location, but isn’t at another location. This is quite normal. It’s also the reason why Elecraft states that both antennas are designed to be used with an ATU.

So there you go! If I hook up my AX1 or AX2 to a radio, I’ll always have some means of matching the impedance–either an external ATU, or a capacity hat. You can also tinker with the length of the telescoping whip and counterpoise to tweak the match.

The important part–especially if pairing these antennas with a radio that lacks both an internal ATU and SWR meter (say, the MTR-3B, G106, or TR-35)–is that you’ve some means to check the SWR before conducting a long activation session. Continue reading Breaking in the new Elecraft AX2 during a short POTA activation →

Antennas, Comparisons, Guest Posts, News, Portable, POTA, QRP, SOTA

How I found the best antenna for my SOTA/POTA activations

10 Comments

How I found the best antenna for my SOTA/POTA activations

by Thomas (DM1TBE)

Intro

Until January this year I had a German “Klasse E” / CEPT-novice amateur radio license (equivalent to the US General Class), which limits the use of HF to the 10-,15-, 80- and 160-meter bands. When I started with SOTA I used homemade single band end-fed antennas most of the time. However, that is only feasible for the 10- and 15-meter bands.

Unfortunately, both bands are very moody and sometimes they have not worked at all. Unlike the UK for example, FM is uncommon for SOTA in my home association DM (i.e. Germany Low Mountains). You can be lucky and get your 4 QSOs, but I did not want to rely on pure luck.

Therefore, I bought an end-fed half-wave antenna for 10-, 15-, 20-, 40- and 80-meter bands, after some experiments with 10-80-meter end-fed half-wave antennas, from a small German company called ANjo.

Although I could not use the 20- and 40- meter bands at that time, the EFW80-10P (en: auto-translated) antenna gave me the possibility to use the 80-meter band. The antenna could also be tuned for 15. It has a mechanical length of 23.6 m / 77 ft and a coil for the 80-meter band. It is pretty lightweight with 0.4 kg / 14 oz and allows up to 30 watts PEP – more than enough for me. 80-meters is not the best band for daytime SOTA activations, but in 21 months doing SOTA activations, it worked 37 times and tipped the scales for an activation from time to time.

It was sometimes a bit tricky to raise the long wire into the air, but it always worked … better or worse …somehow … like here in the woods along a trail.

In January this year, I upgraded my license and a new world of HF-bands opened for me. Although I have learned a lot about propagation for the exam, I am in favour of a German saying: “The difference between theory and praxis is larger in the praxis than in the theory”. Continue reading How I found the best antenna for my SOTA/POTA activations →

Announcements, News

On the Ham Radio Workbench Podcast crew

6 Comments

I have a nasty habit of not mentioning some of the most significant things that happen along my radio journey.

After posting the announcement about the March 25-26 QSO Today Expo earlier this week, I received a number of messages from readers asking if I had joined the Ham Radio Workbench Podcast crew in a permanent way. I can’t believe I haven’t mentioned this before.

The answer is YES!

Those of you who know me well know that I don’t have a lot of free time. At this point in my life, I’m a very busy father, husband, son, and hopeless field radio addict. But when George (KJ6VU) asked if I wanted to joint the HRWB crew, it was a no-brainer.

I have a fairly extensive list of podcasts I follow, but there are only four that I listen to each time they produce a new episode: QSO Today, The Airline Pilot Guy Show, Big Picture Science, and the Ham Radio Workbench Podcast. I cherry-pick all of the others based on the topic.

I’ve been a long-time subscriber to the HRWB podcast, so when I was first invited to be a guest in 2021, I felt like I already knew George (KJ6VU), Mark (N6MTS), Mike (VA3MW), Rod (VA3ON), and Vince (VE6LK).

After all, I’d spent…what…hundreds of hours listening to them as I drive, travel, mow, split firewood, and put around the shack–? Don’t get me started on the number of things I’ve purchased as a result of being a subscriber to the podcast.

During the recording of that first episode where I was a guest, I realized just how much I enjoyed hanging with those guys. They have such a wealth of knowledge between them, yet none of them take themselves too seriously and they’re always up for a good laugh.

They invited me back several times as a guest and in December ’22, I was asked if I would become a permanent guest.

Although it shows a certain lack of judgment on their part, I quickly accepted before they could change their minds.

So there you go.

On that note, I will be attending the 2023 Hamvention and will be hanging out at the Halibut Electronics and Ham Radio Workbench booth when I’m not cruising the event, taking photos, and likely recording some video. Please stop by and visit!

Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios

Field Report: More Xiegu G106 POTA time and I rope in Brooks to log!

5 Comments

On Friday, February 10, 2023, I had a hankering to fit in a POTA activation that morning. South Mountains State Park was an easy detour on my drive back to the QTH, so I scheduled an activation.

I’d also been meaning to meet up with Brooks (KO4QCC). Brooks started his POTA journey not even one year ago–here’s a field report from his first SSB POTA activation.

Brooks has been steadily working on his CW skills and is dangerously close to doing his first CW activation. We’ve managed to set up one late evening casual CW rag chew and I think his CW chops are very good.  We plan to do more evening rag chews when our schedules align. He’s made amazing progress.

I contacted Brooks that Friday morning and he was game to meet up and do some POTA. He wasn’t quite ready to do a CW activation, so I suggested he log for me using the HAMRS app on my iPhone. I find that logging for CW ops during past Field Days really helped build my own confidence before I started using CW daily.

Brooks was 100% game to log for me.

And let me just say what a luxury it is to have someone log to HAMRS for me on my iPhone! It frees up my brain to simply log on paper (which I always do) and enjoy working stations without the extra busy work! Hat tip to good ole’ Brooks.

South Mountains State Park (K-2753)

I arrived at South Mountains State Park (the Clear Creek Access), put on my hiking boots, then Brooks pulled into the parking lot only a few minutes later.

We agreed in advance to fit in a quick hike up the Clear Creek Trail prior to the activation. I, for one, really needed to stretch my legs!

After the hike, I grabbed some gear from the car and we set up at the one picnic table at the Clear Creek Access.

Brooks and I both had commitments that day so could only play radio for 45-60 minutes max including set-up and take-down.

I deployed the same antenna I’d used the previous day: MW0SAW’s homebrew EFHW on a SOTAbeams winder.

Deployment didn’t take long–since the 40M EFHW is resonant on both 20 and 40 meters, there was no need for an external ATU. I powered the G106 with a 3Ah LiFePo4 battery via my Ham Radio Workbench DC Distribution Panel. Continue reading Field Report: More Xiegu G106 POTA time and I rope in Brooks to log! →

Accessories, New Products, News

N2HTT’s Xiegu X5105 3D-Printed Frame

1 Comment

Some of you might be familiar with Mike (N2HTT)’s Etsy Shop, HamGear3d.

Mike is a long-time QRPer reader/subscriber who designs 3D-printed radio frames for select QRP radios. In the past, Mike has designed frames for radios in his own collection including one for the LnR Precision LD-11, Xiegu X6100, Icom IC-705, and now the Xiegu X5105. Mike has also kindly sent me frames for many of these radios (knowing I also have them in my collection).

Mike has never asked to be plugged or promoted–in fact, the first frame he sent me was for my daughter’s radio–but I think his radio frames are functional and well-designed, so I’m happy to share info here on QRPer.com.

A couple months ago, Mike sent me a frame for the Xiegu X5105 and I realized yesterday that I never posted photos of it. 

Like his X6100 frame, the X5105 frame fits around the radio; assembly is very simple (and well-documented on his website) and it doesn’t require modifying the radio in any way. It simply friction fits around the radio and is secured, thus can also be removed quite easily. 

The frame, I’ve found, also protect the X5105 power button from accidentally being turned on in transit!

Below, I’ve posted a few photos of the Xiegu X5105 frame.

Thanks, again, Mike for sending me this radio frame. Very kind of you. Note that Mike can add your callsign to the front screen protector of the radio frame at no additional cost.

Click here for more details about Mike’s X5105 frame on his website and  Etsy store.

Photos

Click here to check out the X5105 frame in Mike’s Etsy store.

Announcements, Events, News

Register and join us at the QSO Today Virtual Ham Expo!

8 Comments

The 2023 QSO Today Virtual Ham Expo will be held on March 25 – 26 and I would encourage you to register now.

I have attended every QSO Today Visual Ham Expo since Eric (4Z1UG) created this brilliant virtual event. The online platform is quite easy to use and there are loads of fascinating topics from a wide variety of presenters.

Click here to check out the presentation list.

I applaud Eric for championing radio topics that are open and accessible to Technician (and equivalent) class operators.

Twice before, I haven’t been able to attend the Expo sessions live (due to my schedule) but I register anyway! Why? Eric archives and provides all of the presentations in video format on-demand for Expo attendees after the event has ended. I simply log in and work my way through presentations over the course of a month, one morning coffee after another! The gift that keeps on giving!

These presentations are a shorter format and (I find) focus less on general topics covered elsewhere; they’re truly unique to the Expo.

This is one of the main reasons I register for the QSO Today Virtual Expo: I want to support a platform that produces brilliant ideas, innovations, and encourages a wide radio of radio activities!

Click here to check out the Expo and register.

I have no idea how Eric puts all of this together, but I’m glad he does and we all benefit from it.

Ham Radio Workbench Podcast at the QSO Today Virtual Expo!

Join us for a live recording of the Ham Radio Workbench podcast as we help kick off the Expo on March 25, 2023 starting at 1:00 UTC (March 24, 2023, 6:00 PM).

Click here for the schedule.

Eric also shared the following preview of the Roundtable Lounge that allow Expo participants to hang out in real time and move from table to table fluidly.

Here is what the Ham Radio Workbench table will look like (20 seats):

I’m really looking forward to this event! I hope you’ll join us.

Click here to register for the Expo!

Antennas, News, Portable, POTA

AX1, AX2, DS-1, HFJ-350M, MFJ-1899T: Compromised portable antenna strategies vary by location

31 Comments

Many thanks to Terry (N7TB) who sent the following question by email and has kindly agreed to allow me to share it here along with my response on QRPer:

Hi Thomas,

I cannot tell you how much I appreciate your POTA videos and all the suggestions you have made that I have adopted. I look forward to every activation you put on video. […]

[…]I have a question for you about using your AX1, and would really like your advice. I marvel at how quickly you can activate a park even with an AX1 antenna on 5 watts. I also have an AX1 antenna, counterpoise and KX2[…].

Anyway, I was out today activating K-0213, Maude Williamson State Park, about 20 minutes from my QTH in West Salem, OR. I operated 12W into a 33ft. EFHW antenna suspended vertically from a 31 ft. Jackite mast. All my activations are CW; I usually activate 20 meters.[…]

I was able to finally work 22 stations in an hour and a half, mostly in CA, UT, MT, and one in AZ. I did get a contact in KY, AZ NM, and MB, but it was a tough go for them to hear me. Most of my activations take me a bit over an hour to get 20 contacts.

As I thought about how much easier it seems that you are able to activate, I started to think about geography and population density differences between the East and West coasts. I used Google Earth and measured almost all points east of the Mississippi from Asheville and most were within 1200 miles. I would guess 2/3 of the US population live in this area. I drew the same range from my QTH and I get about half way into MT, barely into WY, most but not all UT, just touch the NW corner of AZ, and all of CA. In all but CA, I would guess the population total in this vast area is less than Illinois. That is my dilemma. I would love to be able to go out, setup my AX1 with my KX2 on even 10 watts, and make quick activations, but I would be surprised if I would get many contacts because the distances are so vast in the West and population density so low. I will actually try using the AX1 when the WX gets better and I can sit at a picnic table. So far, I have had little success with it, even deployed with the correct counterpoise. Do you have any thoughts on how to be successful with the AX1 from the West coast for POTA, or should I just concentrate on other antennas?

[…]Thanks again, Thomas, for the emails you have sent me with suggestions about equipment, and for all your great videos.

Very 73,

Terry

N7TB

Hi, Terry,

First of all, thank you so much for the kind words. I really appreciate that!

Regarding your message:

Keep in mind that the day you were operating was a very strange day in terms of propagation. There were times when we were having radio blackouts (especially in the western half of the US) and there were times propagation was amazing, yet very unstable. We were hit by so many heavy CMEs this weekend–one seemingly on top of another.

I think you do have a valid point, though, about the geography–one I try to mention when talking about compromised antennas like the AX1.

QSO Map from my latest AX1 activation.

I realize that I enjoy a lot of success with the AX1 because of where I live. I guarantee that the bulk of the US ham radio population is within easy reach of my AX1 antenna, no matter what band.

For you? There are no hams to your west (within easy reach), extremely few to your north (save WA and BC), and the best ham density is to your south in California.

In your shoes, here’s how/when I’d try using the AX1 (keeping in mind I’ve never operated POTA in the western states):

First, I would focus on using 40 meters when the band is healthy and/or for early morning, late afternoon/evening sessions. That should snag contacts across WA, OR, and CA with the AX1. Might be a stretch for southern CA, but I think you could make that work. The only caveat is that flaring has been wiping out daytime 40 meters a lot lately. You might check band conditions in advance.

I would also consider spending time on 17 meters, and possibly 15 meters with your AX1. This might throw your signal across to the midwest, Ohio Valley, and beyond. 17 and 15 meters isn’t typically as productive as 20 meters (at least, for me) but I routinely log west coast stations on 17 meters with the AX1. 15 meters is also getting a lot of attention in the POTA spots!

A wire antenna is almost always a better option than the AX1 if you have the time and space to put it up, but the AX1 is just so darn convenient.

Cheers,
Thomas
K4SWL

More suggestions?

The reason I asked Terry for permission to post his question and my reply here on the blog is because I suspect there are west-coasters (and those in similar geographic situations) who may be able to share some helpful strategies.

There are so many factors involved beyond what I mentioned in my reply. In fact, I imagine if the goal is to work parts further east, then adjusting the activation schedule for Central and Eastern time zones might also help (for example, not activating during dinner hours when I always see a bit of a lull in hunter activity).

If you have some experience, please feel free to comment!

Field Reports, Morse Code, News, Portable, POTA, QRP

Giving the Xiegu G106 a thorough workout at Fort Dobbs!

7 Comments

On Thursday, February 9, 2023, a rare opportunity opened up for me: a 3.5 hour activation window–!

I was visiting and helping my parents in Catawba County, NC, so considered the park options, almost all of which are within a 35-45 minute drive.

I thought about fitting in two shorter park activations that day, but it has been so long since I’ve had the opportunity to simply hang at one park and play radio for more than an hour, I chose the extended activation option.

Although the forecast was for clear skies that day, a front was moving through that afternoon and the skies were overcast with gusty winds. I could tell rain was a very real possibility, so I chose a site with a picnic shelter to make things a bit easier.

Fort Dobbs State Historic Site (K-6839)

Fort Dobbs was a no-brainer: not only was it the closest park (thus less travel time eating into my on-air time), but the staff there are very POTA-friendly, the site is quiet, and they have an excellent shelter that I suspected (due to the dodgy weather) would be unoccupied.

When I arrived on-site, I checked in at the visitor’s center to make sure the picnic shelter hadn’t been reserved. Fortunately, they said I could have the shelter all to myself!

I had a number of radios in my car and decided en route that I would use the Xiegu G106 once again.

I packed the G106 in a waterproof Husky radio gear box I keep in my car trunk/boot. I grabbed it and my Spec-Ops EDC pack and carried it to the picnic shelter.

My plan was to pair the G106 with MW0SAW’s 40 meter EFHW antenna.

This would give me two resonant bands (40 and 20 meters) so there’d be no need to connect an external ATU. Continue reading Giving the Xiegu G106 a thorough workout at Fort Dobbs! →

Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP, Stealth

Lunch Box POTA: Pairing the Elecraft AX1 with the Penntek TR-45L!

14 Comments

As I mentioned in previous posts, I’ve been using the Elecraft AX1 in heavy rotation this year. I made a commitment to myself to do a string of activations with it in January and February and also pair it with a wide variety of radios beyond the Elecraft KX2 and KX3.  So far, I’ve paired the AX1 with the:

In truth, the AX1 can be paired with any radio when you use a tripod mount.

It’s a bit trickier when connecting the AX1 directly to a radio and using the Bipod as a support because 1.) the antenna connector on the radio mustn’t be too high off of the surface, 2.) there needs to be enough clearance on the back of the radio to accommodate the bipod legs and 3.) ideally, it’s nice to have a ground point on the radio, else you’ll need to clamp the counterpoise to the shield of the BNC connector.

In addition, if your radio doesn’t have a built-in ATU of some sort, then you’ll also need a capacity hat or external ATU to finish off the impedance match. (For more notes about the AX1 and AX2, check out this previous post.)

Of course, you don’t have to use Elecraft’s bipod to support the AX1 when directly connected to a radio–you can build or 3D print your own support–but the bipod is really convenient when it does work.

Objective: Lunch Box Radio

One radio I’ve been eager to pair with the AX1 is the Penntek TR-45L.

Why? Because I love the form-factor.

Something about having a lunch box-sized radio sitting on a table with a telescoping whip protruding out the back and, with that combo, the potential of making contacts all over the globe. Continue reading Lunch Box POTA: Pairing the Elecraft AX1 with the Penntek TR-45L! →