Category Archives: News

Field Report: BROG Gadget Bag Tour, New Anker Speaker, & Pairing the KX3 w/the MC-750 for Serious QRP POTA Fun!

On Tuesday, March 28, 2023, I packed my Elecraft KX3 and took it to the Zebulon Vance Historic Birthplace (K-6856) for a nice, relaxing, early afternoon POTA activation!

It had been a few months since I’d taken the KX3 to the field and it really does deserve some outdoor time because…well…I still think it’s one of the best HF field radios on the market.

I’m spoiled, though, because I also own a KX2 and it does 80% of what the KX3 does, is much smaller, and sports a very long-lasting internal battery. Because of this, my KX2 gets way more field time and the KX3–hooked up to a KXPA100–is my main radio in the shack.

When I make an activation video in the field, I like using a speaker rather than recording from the line out of the radio. Besides the extra post-processing, sometimes the line-out audio from left and right channels are out of phase from each other and end up cancelling each other out in YouTube videos if listening in mono. I recently learned how to fix this, but I find the whole process just adds *that* much more time to post-processing and I’m always pressed for time.

The Elecraft KX3 has a built-in speaker, but it’s pretty anemic. I almost always pair the KX3 with an external speaker to amplify the otherwise excellent KX3 audio for my activation videos.

On this particular day, I had a new speaker to try as well: an Anker Soundcore Mini. I purchased this speaker on the same day I posted Mike’s speaker search and review of the Soundcore Mini. Although I have a Sony SRS-XB12 portable speaker and love it, they’re no longer produced and the battery life isn’t quite as good as the Soundcore Mini (Anker states up to 15 hours per full charge).

This activation would give me an opportunity to really test the Anker Soundcore Mini in the field. In the end, it did a brilliant job.

I should note that I also brought my Blue Ridge Overland Gadget Bag (see above) to the field that day, so I include a little tour and overview of this pack in my activation video.

I did recently post a review of the BROG Gadget Bag here on QRPer as well.

Zebulon B. Vance Birthplace (K-6856)

As I mention in my activation videos, Vance is a small park and, unless you plan to operate from your car, there’s really only one good site to set up: in the picnic shelter. Thing is, if a school, club, or civic group is scheduled to meet that day, the picnic shelter will almost certainly be reserved for them.

Each time I activate Vance, I ask the park staff in advance if the picnic shelter is reserved and if it’s okay if I perform the activation. Fortunately, the shelter is reserved only about 20% of the time. On days when it’s reserved, I simply activate elsewhere.

On the 28th, I had the site to myself and the staff encouraged me to activate as long as I wanted to. Continue reading Field Report: BROG Gadget Bag Tour, New Anker Speaker, & Pairing the KX3 w/the MC-750 for Serious QRP POTA Fun!

QRP DX: A beautiful day for SOTA on Flat Top Mountain!

The weather on the morning of April 4, 2023, was absolutely outstanding!

I woke up that morning, drank a cup of coffee, looked outside and knew what would be in store the day: a SOTA activation!

My schedule was actually open that fine Tuesday because my daughters were on spring break from school, so the only problem was deciding which summit to activate. A good problem, in other words!

After staring at the SOTL.AS map for a while, I decided to activate Flat Top Mountain (W4C/EM-026) near Blowing Rock, North Carolina. One of the main reasons I chose Flat Top was because the roughly five mile round-trip hike is such a pleasant, casual one. My left ankle was recuperating from a bit of a strain, so I knew Flat Top’s flat, wide carriage trails would fulfill my need for exercise without straining my ankle (which, by the way, is doing much better now).

The drive to Flat Top is a beautiful one–a good third of it is on the Blue Ridge Parkway including the Linn Cove Viaduct which offers up stunning long-range views. I made my way to Moses H. Cone Memorial Park, at BRP milepost 294, where I parked the car and put on my hiking boots.

The park was pretty active for early April, no doubt because the weather was so stunning.

I checked out the beautiful Flat Top Manor to see if renovations had been completed.

It looks very close to completion, I have to assume they’ll be open again soon. The old manor was looking beautiful against clear skies!

Flat Top Manor was built by in 1901 by Moses Cone who was a very successful local textile entrepreneur, conservationist and philanthropist. It’s so fitting that this beautiful bit of architecture and these expansive grounds (which includes no less than two SOTA summits) are now protected by the National Park Service for all to enjoy.

I started my hike by following one of the carriage trails in front of the manor. It leads past a farm building, then crosses under the Blue Ridge Parkway two-lane road. Continue reading QRP DX: A beautiful day for SOTA on Flat Top Mountain!

N2YCH’s β€œFly-Away Kit” QRP POTA Activation

Many thanks toΒ Conrad (N2YCH)Β who shares the following field report:


β€œFly-Away Kit” QRP POTA Activation

by Conrad Trautmann, N2YCH

4/15/2023

The National Association of Broadcasters convention is an annual event that takes place every April at the Las Vegas Convention Center in Las Vegas, Nevada. This year, I traveled to the show for work and made some time to activate a park and get another state ticked off my β€œActivated US States” list. I also didn’t want to miss getting the Spring 2023 Support Your Parks Weekend activator award.

A colleague suggested I visit Red Rock Canyon National Conservation Area, K-7494. The park, which is operated by the US Bureau of Land Management, has a 13 mile scenic drive that has various parking areas you can stop at to get out and explore. Red Rock requires a reservation to visit and costs $20 to enter the scenic drive area. There are places within the park you could activate for free, but I took advantage of my military veteran benefit of free admission and drove the trail and activated at one of the scenic overlooks.

Before I traveled, I had to decide what radio and antenna to bring. I selected the Elecraft KX3 and the AX-1 antenna. Not having to check a bag was key to deciding what to take.

I packed the cables, battery and computer in my brief case and the radio and the AX-1 antenna went into my carry-on bag. I did get pulled out of line by the TSA at JFK airport, but the TSA agent was very nice and just asked a few questions and let me through with no issues.

Before I traveled, I took a look at the park page on the pota.app website and saw that Colin, AK7LV, was the park leader in QSO’s. I looked him up on qrz.com and sent an email asking if he had any good advice for me or could give me some pointers. He responded quickly with suggestions of his favorite locations, how to get to them and even a suggested location where I could pick up a twofer at a trail that crossed through the park. He said I should call him when I get into town. Continue reading N2YCH’s β€œFly-Away Kit” QRP POTA Activation

Scott builds a mobile desk for HF park-roving

Many thanks to Scott (KK4Z) who shares the following post from his blogΒ KK4Z.com:


Necessity is the mother of invention

by Scott (KK4Z)

Plato’s Republic he said thatΒ *our need will be the real creator*Β or the proverb as we know it todayΒ *necessity is the mother of invention*.Β Β Recently, my friend Thomas K4SWL acquired a Yaesu FT-891.Β Β During his YouTube video, he expounded on how much fun he had with it. It did indeed look like fun. During this time I was pondering about doing more day activations instead of overnights.Β Β With the cost of everything still climbing, the need to conserve becomes apparent.Β Β I thought an FT-891 might really be a great radio for these day activations. Then reality set in.

I already have a number of projects I am working on and misc things like maybe having to replace my old 33β€² push-up pole, it was not in the stars nor was there a twinkle in my wife’s eye when I mentioned it. In reality, the IC-7300 is a great radio and does everything I need to do especially in the field. I don’t need another radio, I have three 100 watt radios and three QRP radios. I still wanted an easy setup for these one-day activations. I want to drive to a park, set up in a few minutes, operate, tear-down in a couple of minutes, and head for home or another park. I also wanted to make my day activations park ranger friendly. To me, that means trying to be inconspicuous.

I have two projects planned. The first is a desk for my truck. I am making a desk to sit over the center console and front passenger seat big enough to hold my IC-7300, a laptop and a CW paddle. My plan is to secure the desk to the truck and the radio to the desk. I also wanted to make this as cheaply as possible. I used stuff I had on the property such as a half sheet of plywood and some construction lumber. The only things I had to buy were some screws and eye-bolts, about 14 dollars worth.


The plywood was cut to 24 x 38.5 inches. The length covers the center console and front seat while still allowing me to get to the heat/AC controls. I gave the corners a generous radius and I broke the edges with a router. On the underside, I used a 2 x 12 to make a spacer for the center console where the cup holder is and a leg for the other side over the passenger seat. The spacer is glued and screwed to the desktop but the leg is not attached. This is to make it easier to store. I made a socket for the leg using 2 x 2’s. It’s probably easier to look at a picture than me to try to explain. I added eye rings to the rear of the desk and use a bungee cord to secure the desk to the passenger seat. The only other thing I did, sprayed the top with polyurethane. Note. I am not a carpenter or cabinet maker. I use rough hand tools to get the job done and I am often making do with what’s on hand or what’s the cheapest way to do it.

Continue reading Scott builds a mobile desk for HF park-roving

Join Brooks (KO4QCC) on his First CW POTA Activation–!

Friday, March 24, 2023 was a very special day for Brooks (KO4QCC) and for K4SWL.

I’m so excited to share this with you.

You might recall that, last year, I met up with Brooks at Tuttle Educational State Forest as he performed his very first POTA activation in SSB. He did such an amazing job!

Since I first met Brooks, he’s always had a goal of learning CW and activating parks and summits using Morse Code.

I’ve been in touch with Brooks regularly over the past year and have followed him as he progressed on his CW journey.

Though, like me, he has an active family life, Brooks has found the time to practice CW both through lessons and actual on-the-air contacts. Fortunately, this is all possible because–again, like me–his wife and family are very supportive of his amateur radio adventures!

Early this year, we met on 80 meters and had a good one hour rag chew at about 12 words per minute. I could tell he was ready to do his first POTA activation in CW.

To give him a little real-world practice, we decided to hit the field on a day when I was performing an activation and he could log for me in real-time.

I could tell by how well he was logging as I worked stations at 18WPMΒ  that he was ready to perform his first activation, so we made it a goal to do so within the next couple weeks.

Fast-forward to 8:30 AM on March 24 when Brooks and I met at the Folk Art Center on the Blue Ridge Parkway. Coincidentally, this is the same location where I performed my first CW activation!

We deployed his MFJ-1984MP 40 meter EFHW (End-Fed Half Wave) and connected it to his Xiegu X5105 transceiver in very short order. Brooks also chose his lucky CW Morse paddle for this activation.

But before hopping into the field report, let’s back up just a bit…

First CW Activation: Getting there…

Brooks very kindly wanted to share a bit about his CW journey in this field report. He writes:

From the moment I knew of its existence, becoming a POTA activator using CW has been at the top of my β€œradio bucket list.”

It seemed like the ultimate challenge and I knew I would never be satisfied until I was able to confidently activate parks using CW. There is also a bit of mystique to CW that other modes lack, making it inherently more interesting to me. In this article, I am going to share the path I took to learn CW and how it culminated in a very successful CW activation.

Continue reading Join Brooks (KO4QCC) on his First CW POTA Activation–!

Snagging a little POTA QRP DX with the Chelegance MC-750 and Xiegu G106

Over the past couple of months, I’ve been trying to give the Xiegu G106 a thorough workout in the field. This little HF QRP radio is on loan to me from Radioddity who has very kindly been quite flexible about the loan period.

I want to give the G106 a fair shake-out because I believe it must be the least expensive multi-mode, full HF coverage transceiver on the market. Field ops are always looking for portable, affordable, effective radios to take to the field so many are considering the G106.

Of course, you simply can’t get benchmark performance out of a low-cost leader.

My full review of the Xiegu G106 will be in the May 2023 issue of The Spectrum Monitor magazine. It’s one of the longest reviews I’ve published in TSM because I try to fully explore the pros and cons of this pint size rig in order that pretty much anyone can make a purchase decision based on their own preferences and requirements.

POTA Plan B

On Saturday, March 18, 2023, IΒ  decided to take the G106 out for a very brief activation during a return trip to my QTH.

My park of choice was Tuttle Educational State Forest (K-4861) because it’s conveniently located, is an excellent POTA site, and I wanted to fit in a quick hike as well. Tuttle’s two mile loop fit the bill perfectly.

When I arrived at the park entrance, however, the gates were closed. I had double checked Tuttle’s schedule in advance and was under the impression that they had started opening the park on Saturdays again for the season.

I really wanted to fit in a decent hike so the next logical park choice was Lake James State Park. It didn’t require a major detour and I was certain it would be open.

Lake James State Park (K-2739)

Lake James has two major access points: the Paddy’s Creek Access and Catawba River Access.

I prefer the Catawba River Access even though it’s much smaller than Paddy’s Creek. For one thing, it’s always less busy and they’ve better spots to set up for POTA (since I like hanging wires trees more often than not). Although the Catawba River access lacks the trail network found at Paddy’s Creek, they do have a few trails that can be stitched together for a nice workout.

Lake James State Park Map Catawba River Access

After arriving at the park, I put on my hiking boots and walked the Fox Den Loop and a bit of the Lake Channel Overlook.

I hiked back to my car, ate a bite of lunch, then grabbed my radio gear for some cheap POTA fun!

Higher Bands

The great thing about the G106 compared with some of my more affordable QRP radios (MTR-3B, SW-3B, R4020, TR-35, etc.) is that it’s not limited to CW and it covers all bands from 80 to 10 meters. Continue reading Snagging a little POTA QRP DX with the Chelegance MC-750 and Xiegu G106

WA3RNC introduces the Penntek TR-45L “Skinny” and reservation form

Photos by WA3RNC

Many thanks to John (AE5X) who notes that John (WA3RNC) has release information about his new TR-45L “Skinny” design.Β 

Here’s the information WA3RNC shares on the Penntek website along with an update about the kit version of the TR-45L (non-skinny version):

TR-45L Kit Version Update

The kit version has been delayed for the time being due to several (most) beta builders experiencing frustration with the process of assembling the front panel onto the main board with 15 loose and unsoldered switches, jacks, and controls. These issues indicate that the TR-45L kit version will most likely be offered as a semi-kit with the main board being largely factory assembled, leaving the pre-aligned plug-in RF board in kit form. The internal battery option would be available in this kit version, but not the Z-Match ATU.

TR-45L Skinny (left) TR-45L (right)

A second kit version in a thinner housing is also being considered (see the TR-45L “Skinny” photos). This version would be offered with no options available (other than a $20.00 tilt bail) as there is no room inside the thinner housing for the internal battery nor the ATU option. It does, however, contain an internal speaker. Unfortunately, while greatly simplifying construction, these semi-kits will erode the normally expected cost savings with a kit. The best guess price for these TR-45L semi-kits would be around $500.00. We welcome your thoughts and opinions on these semi-kit concepts.

For those interested in signing up for the reservation list, you can use the reservation form linked here. Be advised, it could take up to 6-8 weeks until they are ready to be shipped.

The TR-45L has been a long time coming, and I thank you for your patience during the development cycles with parts procurement issues due to the covid pandemic. Let’s hope that the ugly covid experience is behind us…

In a nutshell, the TR-45L Skinny will simply be a TR-45L in a skinnier chassis with no option for an internal battery nor Z-Match ATU, but will still have an internal speaker.Β 

For those of you who don’t care for the Z-match or internal battery, the TR-45L Skinny will certainly be more portable and less bulky than the original TR-45L.

I suspect the performance will be identical. I’m sure the internal speaker will work well, but I will be curious if it sounds as full-fidelity as the original TR-45L. I might ask John for a loaner to check it out once released!

Again, if interested in this variant of the TR-45L, you might wish to fill out the reservation form.

Steve tests the Gabil 7350T antenna, Gabil GRA-ULT01 tripod, and BaMaKeY TP-III paddles

Many thanks to Steve (MW0SAW) who shares the following field report:


Mini Field Report: Testing the Gabil 7350T and BaMaTech TP-III on a brisk SOTA activation!

by Steve (MW0SAW)

Went for an early walk/SOTA activation up Fan Fawr GW/SW-005 (734m) this morning (9/4/23). I think someone said it was supposed to be the hottest day of the year in the UK. It was about 5 deg celsius with a bitter wind chill of -2c on the summit! It’s very close to the highest peak in South Wales, Pen Y Fan (886m).

As I mentioned a couple of weeks ago in our emails, I wanted to test a new compact antenna I purchased recently, called the Gabil 7350T in the USA, and branded as the Sharman MD-3500 in the UK where I got mine. I also took the Gabil GRA-ULT01 MK2 tripod which I did purchase from the USA on Amazon.com.

The Gabil 7350T Compact Antenna and Gabil GRA-ULT01 MK2 tripod

Another first for the the activation was the Bamatech TP-III ultra compact paddle, Dinos were included πŸ™‚

Starting my walk, the lovely view of the reservoir quickly disappeared and was the last view I would see ascending into the mist.

I took refuge in my Decathlon 1 man camping shelter, setting up the tripod and antenna close by.

The wind was howling and turning my back the antenna toppled over. This was quickly resolved with a tent peg on one of the tripod legs. Quick setting of the slider with the analyser got 1.2 SWR and so after a slurp of coffee, I started to call CQ on 20m CW. A nice stream of European qsos ensued with good reports (many 599), it was pleasing to hear with such a small antenna (about 8 ft). Just as the contacts were drying up, I was taken aback by a strong VK station! Always great feeling to get some dx like that but especially pleasing with this tiny antenna on its maiden voyage πŸ™‚

I switched to 20m SSB for a few more QSOs but struggled with QRM on two frequencies. My allotted time was running low and my fingers were numb, so I packed up the HF and got the handie out to catch a few local VHF contacts.

So what can I summarise from this activation, well I can safely say I love the Gabil/Sharman antenna and Gabil tripod. They would make a really nice additional to a small go bag, they seemed to work almost as good as a full size 1/4 on 20m. Time was limited this trip and I was too cold to hang about to try more bands, but extremely pleased with the performance so far.

The Bamatech key is a pure work of art, beautifully made, sensitive and precise. Probably my best portable key to date in my collection.

Equipment:

(Note: Amazon links are QRPer.comΒ  affiliate links.)

Thanks to all the chasers.
73
de MW0SAW/P

POTA at Fort Dobbs: Testing a BCI filter and depleting a battery!

Friday, March 17, 2023 was a dreary, rainy day.

It was the sort of day made for reading a good book by the fireplace or…in my case…activating a park!

I don’t let rain stop me from playing radio in the field. I carry a rain fly in my car pretty much all of the time so if push comes to shove, I can create a dry space to play radio.

That said, a number of parks I frequent have large covered picnic shelters, so why not use what’s already there?

That particular Friday, I had one particular park and one particular goal in mind.

G106 + BCI Filter

As I mentioned in a post this weekend, I purchased and built a K9DP BCI Filter Kit.

If you’d like to see photos of the build, check out this post.

I built this BCI filter specifically to pair with the Xiegu G106 transceiver. Why? Because the G106 is prone to overload if you’re anywhere near an AM broadcaster.

The last time I visited Fort Dobbs State Historic Site (K-6839), a local AM broadcaster bled through the audio of the G106. I was able to complete the activation without any issues at all–in fact, it was a very successful activation (read the report here).

Still, I did feel that the receiver was a bit less sensitive due to the broadcaster overwhelming the front end of the radio.

That Friday, I wanted to pair my Xiegu G106 with the new in-line BCI filter to see if that might mitigate the interference I experienced before.

Fort Dobbs State Historic Site (K-6839)

After arriving at Fort Dobbs, and before taking my gear out of the car, I made my way to the park office (in the log cabin at the end of the sidewalk above) and asked for permission to use their picnic shelter. Continue reading POTA at Fort Dobbs: Testing a BCI filter and depleting a battery!

Video: Alan’s method for winding toroids

After posting my article about the K9DP BCI filter kit build, Alan (W2AEW) commented:

If you dislike winding toroids, the method I show in this video makes it a lot easier!

This is an excellent way to handle the toroid while winding. Check out his video below:

Click here to view on YouTube.Β 

Alan has a massive library of instructional videos on YouTube. If you haven’t already, subscribe to his channel!