Category Archives: Announcements

2014 TEN-TEC hamfest cancelled due to pending move

TenTecLogoMany thanks to Mike (K8RAT) for sharing the following press release from Ten-Tec:

Dear Ten-Tec customers and friends,

Hamfest at Ten-Tec has been cancelled this year due to our plans to relocate in early fall.

After enjoying 46 years in our headquarters on Dolly Parton Parkway, we are actively seeking a new location in Sevierville that will offer more modern and energy-efficient facilities, a new showroom, and a much-needed upgrade in working environment for staff.

Our current facility and property are already under contract, and, as a result, they will not be available for our annual Hamfest open house and flea market. And, chances are, in September we’ll be neck-high in boxes and crates preparing for our move.

So, in lieu of our weekend Hamfest, we’re planning to celebrate the entire month of September with a moving sale, offering not-to-be-beat discounts and incomparable specials on Tentec.com.

Stay tuned for more details about the moving sale. And, in the meantime,  come see what’s new at Ten-Tec at Booths 548-550 at Dayton Hamvention, May 16-18.

Jim Wharton, NO4A

President

This is very sad to me as the Ten-Tec hamfest is one of my favorites of the year. I suppose the moving sale could make for a small consolation prize, though.

Vibroplex to distribute SSB-Electronic products in US & Canada

buglogo_betsyI’ve just received word that Vibroplex is partnering with the European manufacturer SSB-Electronic to offer products like the Zeus ZS-1 SDR and Ecoflex cable to customers in the USA and Canada.

Vibroplex has stated that they are “offering introductory pricing for all SSB-Electronic products from now through the Dayton Hamvention will be posted [on the Vibroplex website] in the near future.  The complete SSB-Electronic product line will be available for shipment approximately April 21st.”

Read full details about this in the Vibroplex press release below:

VIBROPLEX LLC TO DISTRIBUTE SSB-ELECTRONIC PRODUCTS IN UNITED STATES AND CANADA

The Zeus ZS-1 SDR transceiver
The Zeus ZS-1 SDR transceiver

Top-of-the-line Ecoflex™ coaxial cable, the Zeus ZS-1 SDR transceiver and a revamped line of VHF preamps and accessory equipment are now available for delivery.

KNOXVILLE, TN. April 8, 2014 – SSB-Electronic GmbH and Vibroplex LLC are pleased to announce an exclusive agreement for Vibroplex to distribute the SSB-Electronic product line in the United States and Canada.

Already #1 for coaxial cable sales in the European Amateur Radio market, SSB’s EcoFlex™ cable features the lowest loss characteristics of any commercially available non-hardline cable and for price vs. loss characteristics tops many available small hardlines. EcoFlex™ is available in 6 different versions to meet any RF need through 6-8 GHz dependent on cable version. Need maximum signal delivered from the amp to the antenna? This will meet your needs.

SSB is well-known for their range of VHF high performance products including both standard and auto-switchable receive preamps, sequencers and switches. A completely revamped product line has been released for 2014.

The new Zeus ZS-1 SDR transceiver features outstanding specifications and an easy-to-use graphical user interface. This exciting new product will have a feature presentation at the upcoming Dayton Hamvention™.

Visit the distribution webpage at www.vibroplex.com for complete information.

About Vibroplex LLC:

Vibroplex is the oldest continuously operating business in Amateur Radio, in their 109th year. In addition to manufacturing a line of Morse Code keys for the hobby, they also currently distribute products for German radio companies Spiderbeam GmbH and Folding Antennas on an exclusive basis in the United States and Canada.

Contact:

VIBROPLEX LLC
Scott E. Robbins
2906-A2B Tazewell Pike
Knoxville, TN 37918 USA
(865) 309-5073
www.vibroplex.com
www.spiderbeam.us

April 18 is World Radio Day

IARU logo

Friday, April 18, is the International Amateur Radio Union (IARU) “World Radio Day”. The theme for World Radio Day 2014 is “Amateur Radio: Your Gateway to Wireless Communication”.

World Radio Day is celebrated each year on April 18 to recognize the anniversary of the founding of the IARU in 1925. The first president of the IARU was Hiram Percy Maxim, 1AW.

Learn more about World Radio Day:

http://www.arrl.org/news/amateur-radio-your-gateway-to-wireless-communication-is-world-amateur-radio-day-2014-theme

http://www.iaru.org/world-amateur-radio-day.html

Learn more about the IARU:

http://www.iaru.org/

TX Factor: a brilliant Ham Radio show from the UK

Without a doubt, this is one of the best produced Ham Radio shows I’ve ever seen. I eagerly await TX Factor’s next episode.

Click here to view TX Factor’s website. Thanks for the tip, WD8RIF!

Tokyo Hy-Power ceases trading

Tokyo Hy-Power headquarters in Japan
Tokyo Hy-Power headquarters in Japan

It appears the Japan amateur radio manufacturer, Tokyo Hy-Power, has filed for bankruptcy and ceased trading.

Their main Japanese corporate website is now offline.

Read the full story on the Southgate ARC website.

Philippines Amateur Radio Association committed in aftermath of Haiyan

herologo(Source: Southgate ARC)

Hams still involved in Philippines typhoon disaster

While humanitarian aid continues to flow albeit slowly in some areas in the aftermath of Typhoon Haiyan in central Philippines, the Ham Emergency Radio Operator network stations are handling lots of vital messages.

The death toll has been put at 2,000 or so officially, even though estimates have been much higher.

Ramon Anquilan DU1UGZ, of the Philippines Amateur Radio Association (PARA), said its Ham Emergency Radio Operator or HERO network is working inside the disaster areas, and sending messages on HF and VHF elsewhere in the archipelago.

He reports that the first improvements in the relief response were felt with cellular mobile companies beginning to restore their services in hard hit Tacloban.

The RADNET HERO station there had been handling inquiries about the whereabouts of people in the Tacloban and the nearby Palo areas, but when Internet services became available the pressure from residents was greatly reduced. The RADNET station could not operate after dark due to a curfew imposed to maintain law and order.

Ramon DU1UGZ said that the National Telecommunications Commission (NTC) has now used the HERO network for several messages.

“It appears that NTC had an emergency meeting and decided to provide hams in the area with mobile rigs and hand-held portables.

“The NTC’s awareness of the importance of Amateur Radio is maturing and there are talks of our clubs training and maintaining stations at NTC regional offices,” he said.

The national agencies have relocated the Command Post to the Tacloban Grandstand. For coordination reasons, the City Disaster Risk Reduction and Mitigation Council (CDRRMC) has joined them.

Ramon DU1UGZ said that the hard-working DU5AOK station is left by itself in the second floor of city hall in Tacloban, with security, food, and logistics problems starting to emerge.

“We are urgently requesting assistance to sustain the DU5AOK station and ensure operations in the other hard struck areas are established – Samar, Panay, Cebu, Biliran, and the tourist area of Palawan,” he said.

“We need equipment (field deployable systems, power source generators and antenna systems), food or ration packs and operators tent.”

Financial donations are also welcome via the PARA Paypal account.

Jim Linton VK3PC

Chairman IARU Region 3 Disaster Communications Committee

W1SFR offers an array of products for the QRPer

The KX3 helper non-slip pad.
The KX3 helper non-slip pad tilts your KX3 at an optimum angle for operation.

Steve Roberts (W1SFR) has recently informed me about his new website, KX3helper.com where he sells an array of products for QRPers.

Steve’s product line includes:

  • KX3/KX1 Helper: A foam stand lined with non-slip material to hold the KX3 at a high angle (also other rigs with the controls display on the top surface such as: KX1, HB1-B, TenTec 40/ series, and PFR).
  • QRPad: A foam stand lined with non-slip material for rigs with front-facing controls such as MFJ, OHR, Weber, and Open QRP.
  • FistRest: Neoprene mat covered with non-slip material to provide support when using keys.
  • EndFed 40-6m Antenna: 31 feet long and made with genuine “Wireman” 18 ga Silky Antenna wire. The 9:1 UnUN weighs 3.92 oz. The Antenna wire and lug weigh 3.12 oz. Total weight about 7.34oz.

I’m impressed that Steve tries to source all of his products and materials locally and that his items are quite affordable.

Check out Steve’s site by clicking here.  Many thanks to Graham (G3ZOD) who also informed me about KX3helper.

SOTAbeams new line of radio stands

KX3-StandMany thanks to Graham (G3ZOD) for this tip:

SOTAbeams (UK) has a new range of perspex stands for popular QRP CW radios.

These include personalized ones with callsign for K1, KX3, FT817, and X1M, and a non-personalized one for KX1, HB-1B, and R4020.

Click here to view SOTAbeam’s range of radio stands.

OpenQRP kit now available in North America

OpenQRPMany thanks to Graham (G3ZOD) who writes:

The OpenQRP 40m CW Transceiver kit is now available for delivery to the USA and Canada from OpenQRP.com (USA) at $150.00 plus $10.00 shipping (USD).

This provides around 6 to 8 Watts output at 13.5 V on 7 MHz. It includes an LCD display, CW decoder, memory keyer, and has 400 Hz IF selectivity. The processor is based on Arduino technology, allowing experimentation with the firmware. It is designed by Steve Elliott, K1EL, well known for his WinKeyer family of keyers.

(The OpenQRP 40m CW Transceiver kit is also available from Kanga Products (UK) http://www.kanga-products.co.uk/index.php?option=com_content&view=article&id=76&Itemid=78  at £89 (GBP) excluding delivery.)

Say “Hi” to Juno as it passes by Earth today

EFB_publicmap1-675Many thanks to SWLing Post reader, Troy, who emailed me about a really fun and unique opportunity for amateur radio operators:  to send the NASA spacecraft Juno a Morse Code greeting [specifically, “HI”] when it passes over Earth tomorrow, starting around 18:00 UTC.

The NASA Jet Propulsion Laboratory explains:

“NASA’s Juno spacecraft will fly past Earth on October 9, 2013, to receive a gravity assist from our planet, putting it on course for Jupiter. To celebrate this event, the Juno mission is inviting amateur radio operators around the world to say “HI” to Juno in a coordinated Morse Code message. Juno’s radio & plasma wave experiment, called Waves, should be able to detect the message if enough people participate. So please join in, and help spread the word to fellow amateur radio enthusiasts!

This page will be updated with additional information as the event approaches. In addition, we have created a Facebook event page where you are welcome to a discuss[ion of] this activity.”

ham_morsecode_ditsTo be clear, this is a coordinated and unified message to the Juno craft; there will be no opportunity to hear a response from it.  Rather, the Waves instrument data containing the message will be shared by the Juno team after the flyby.  But still, what fun!

If you’re a licensed ham, and this sounds like something that you’d like to be part of, please check out the the NASA JPL page dedicated to this event. It has all of the information you’ll need to transmit to Juno, including a countdown clock–or to simply listen to everyone who does. Be sure to check out Juno’s Technical FAQ (click on the FAQ link) which answers a lot of the questions participants have already asked.

I’ll certainly do my best to be a part of the unified greeting to Juno.

I should note that I’m pleased to see the JPL page is running despite the US government shutdown. Many other NASA web pages have been affected.

Hi, Juno; we send our greetings!

juno-banner

This article has been re-posted from my shortwave radio blog, The SWLing Post.