SOTA: Activating Bearwallow Mountain with the KX2, MPAS Lite, and Hazel

The MPAS Lite vertical has an impressive view!

I’ve been receiving a lot of comments lately from readers and viewers asking to see more Hazel in my reports and videos.

Hazel, if you’re not familiar, is my brown, white, and freckled canine shadow.

Hazel requires absolutely no prep time to go on a hike and summit/park activation. She’ll go from a deep, dreamy sleep where she’s chasing squirrels and her paws are twitching, to wide awake, tail wagging and nose pointed at the door in 2 seconds flat.

All it takes is the sound of me putting on my hiking boots (which must be louder that I imagined).

On Monday (May, 24, 2021) the weather was beautiful and I decided to finally add Bearwallow Mountain to my list of SOTA activations. Hazel was ready for a short hike!

Bearwallow Mountain (W4C/CM-068)

Bearwallow is one of the most popular summits to activate in the Asheville/Hendersonville area of western North Carolina. Any semi-seasoned local SOTA activator probably has Bearwallow in the logs. Why?

The Bearwallow antenna farm is extensive!

For one thing, Bearwallow is a ham-friendly site. A number of local repeaters are on this mountain and some of our local clubs have access to the summit. Once–I can’t remember the year–I even spent time with a club (I believe it was the Roadshow ARC) on Bearwallow for the ARRL Field Day. It was a blast!

Bearwallow is also a very accessible summit.

The trailhead to the summit (Google Map) is tucked away in the Upper Hickory Nut Gorge area–and there’s ample paved parking unless you happen to pick a very busy day (basically, any weekend with good weather will be busy!). Hazel and I were hiking on a Monday morning, thus there was very little activity and loads of parking spaces.

Some years ago, Conserving Carolina acquired the summit and much of the land on Bearwallow Mountain. Their conservation easement protects this area from future development and opens it for the public to enjoy.

Conserving Carolina maintains the trail system to the summit and all of the hiker information and blazing.They do a brilliant job!

There are two options for hiking to the summit: a proper foot trail, or you can take the Fire Tower Road which is the best choice for hikers who need a more gentle incline and flat gravel hiking surface.

Click here for a map of the trails (PDF).

Hazel and I decided to go up the foot trail and descend via the Fire Tower Road to make a loop.

We spotted a number of plants in bloom on the way up.

The foot trail is an easy one to hike, too. It’s well-maintained, as I mentioned, and there are only a couple of steep-ish sections.

There are even opportunities to take in views on the trail.

When you reach the top of the trail, it opens onto a pasture.

And the views are panoramic!

There are cattle all over the summit, so give them wide berth.

Speaking of cattle, Hazel is quite fond of them…or at least what they leave behind.

She’s been known to roll in cow patties when she has the opportunity (or if I’m distracted with something else…like performing an activation!).

Hazel and I found a nice spot to set up the station well within the activation zone. On summits like Bearwallow where there are clusters of communications towers, I prefer not to set up next to them. This is where that 25 meter SOTA activation zone (AZ) comes in handy.

Gear:

I had actually planned to use my Elecraft KX3 on this activation, but after setting it up, I realized quickly that my power cord had developed a fault.

Fortunately, I packed a spare radio.

Knowing in advance that this would be a short hike–before leaving the QTH–I also packed the KX2 kit in my backpack as a backup. I don’t always have the luxury of packing a second radio, but wow! Am I glad I did that Monday!

Setting up the Chameleon CHA MPAS Lite vertical, of course, was super easy.

On the Air

I started the activation on 20 meters and spotted myself to the SOTA network via the SOTA Goat app. Of course, before leaving home, I had also set up an alert on SOTAwatch so that the spots page would auto-spot me via the Reverse Beacon Network (RBN) if I didn’t have mobile phone coverage.

In short? The contacts started rolling in. I was very surprised to have this sort of response on a Monday morning.

In 22 minutes, I worked a total of 19 stations including one summit to summit (S2S)–thanks for that, Eric (VA2EO)!

I was very pleased with the number of contacts logged in such short order because I only had a max of 25-30 minutes to be on the air before I needed to pack up and head back to the QTH.

Here’s the full log:

Activations like this one remind me of what one can do with QRP power and a modest antenna.

Sure, at one point–after I had worked at least my first four to achieve a valid QRP SOTA activation–I increased the power from 5 watts to a cloud-scorching 10 watts! 🙂

Here’s a QSO map of the contacts:

Video

Here’s my real-time, real-life (a.k.a. it’ll put you to sleep) video of the entire activation:

I must apologize for the audio in this one–it’s a little weak due to how the camera was set up.

Hazel at it again

So I brought along a retractable leash/lead for Hazel for this particular outing.

This leash allows her to roam more freely during our actual hike. On the summit, I locked the leash and attached it to my pack so it would keep her within 4 feet or so of where I was sitting which was cow patty-free.

At one point, near the end of the activation, when I was trying to manage a few calls, off-camera Hazel discovered that the leash unlocked, allowing her more flexibility to roam.

I looked up to discover that she found a semi-moist cow patty I somehow missed and was preparing to “enjoy” it. While sending CW and trying to keep from knocking down the camera, I used my left foot to put the brakes on her leash. She knew I was struggling, though, and tugged more.

I managed to stop her before even one paw plopped in the patty. Somehow. It was a very close call, though.

If you’ve watched my activation videos before, you’ve no doubt gathered that I’m not a multitasker. This little event really tested my ability to hold it all together on and off camera! 🙂

After packing up the station, Hazel and I took the Fire Tower Road back to the car. It was a very pleasant stroll and cow patty free.

Thank you for coming along with me on this SOTA activation and making it to the end of the report. You deserve an award! Please treat yourself to a local summit or park soon!

Thank you & 73,

Thomas (K4SWL)


Do you enjoy QRPer?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

6 thoughts on “SOTA: Activating Bearwallow Mountain with the KX2, MPAS Lite, and Hazel”

  1. I always have to read the QRP’r first. Then on to the vid. And when I was a kid our dogs roll of choice was rotting carp by a creek down from our house. My mom was never to happy about that.

    Thx

  2. Love your videos. It’s obvious, at least to me, that you know what are doing and willing to share your knowledge. I know your prefer CW, but if possible could you trickle in some voice/phone attempts. For me to learn CW is not in my near future. Appreciate the attempts in SSB especially using the KX2 rig. A radio I will purchase once I pass the GENERAL exam.

    Thanks again

  3. I especially enjoyed this post Thomas, as i’m becoming more and more interested in that MPAS lite antenna, but am also trying to figure out how to bring my still very “lively” dog with me on activations as well.

    Don’t hesitate to include some preferred dog gear in your list !!!

  4. CPOTA = Cow Patties On The Air, or is it Cow Patties In The Air? Anyway, she’s trying to activate them. 🙂 Enjoyed the video again, quite some pile-up! Thank you!

  5. I too would be interested in “adventure” articles about using KX2 w/ phone. I bought a KX2 over the winter and have not yet used it with CW. I have a feeling I have to change a lot of the voice settings in order to get the CW working; maybe that’s not the case. But considering how long it took to figure out how to get semi-comfortable with operating this rig, I’m not inclined to make changes…yet.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.